• Summary

Your Summary

CHOPPING CORN HEADS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4412 - 30.0" Spacing - wt. 8,589 lbs.
    4412 - 30.0" Spacing chopping
    wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 12 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4412F Standard - 30.0" Spacing -wt. 9,686 lbs.
    4412F Chopping - 30.0" Spacing
    - wt. 10,418 lbs.
    Fully adjustable weed knives
    Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 12 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
     
    4412F CORNHEADS CAN ONLY BE UNTILIZED ON NEW 7230/8230/9230 COMBINES. * * * * * * * * * * * * * * * * * * * * * * * TIRE REQUIREMENTS DRIVE TIRES MUST BE DUAL 620/70 R42 LI 166 A8 R1W REAR STEER TIRES MUST BE 750/65 R26 166 A8 * * * * * * * * * * * * * * * * * * * * * 7230 model requires a HD lift package tooperate a 4412F cornhead
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • For 2500 series and prior combines with
    Legacy feeder house.
    STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4206 - 30.0" Spacing - wt. 4,165 lbs.
    4206 Chopping- 30" Spacing -
    wt. 4,431 lbs.
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • For 2500 series and prior combines with
    Legacy feeder house.
    STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4208 - 30.0" Spacing - wt. 5,780 lbs.
    4208 - 30.0" Spacing Chopping
    wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. Oil bath main drive chains. 8 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • 2600 Chopping Corn Head [ Versions ]
    • STANDARD FEATURES:
      Single lever quick attach header latching system Hydraulic multi-coupler connector Single point electrical wiring coupler Telescoping drivelines with torque-free alignment coupling for easy hook-Up Driveline lubrication system (8 row folding) Oil bath row unit drive chain (8 row rigid / 12 row) Gearbox driven row units 15.7 in. diameter auger Auger drive slip clutch Automatic header height control w/Terrain Tracker® Header recognition module Feeder opening shroud with ear deflector Individual row unit slip clutches Disengageable stalk chopping gearboxes Low profile row units Polyethylene row unit shields and points with quick latches for flip up Ear savers Chain removal tool for quick easy chain removal Pinching greasable knife type, two piece stalk roll with front bearing support Weed knives
      2606 - 30.0" Spacing - wt. 4,431 lbs.
      2608 - 30.0" Spacing - wt. 5,732 lbs.2608F - 30.0" Spacing - wt. 6,085 lbs.
      WEIGHTS
      2606 - 30.0" Spacing - wt. 4,431 lbs. 2608 - 30.0" Spacing - wt. 5,732 lbs. 2612 - 30.0" Spacing - wt. 8,598 lbs. 2608F - 30.0" Spacing - wt. 6,085 lbs.
      STANDARD FEATURES: (continued)
      Spring tensioned gathering chains w/ chrome pins Hydraulic adjustable deck plates Road transport warning lamps Case IH standard warranty applies
      Requirements for Operation:
      THE MODEL 2600 CHOPPING HEAD CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE THROUGH DECEMBER
      SHIPPING PERIOD:
      BEGINS THE FOLLOWING APRIL - JULY
    • STANDARD FEATURES:
      Single lever quick attach header latching system Hydraulic multi-coupler connector Single point electrical wiring coupler Telescoping drivelines with torque-free alignment coupling for easy hook-Up Driveline lubrication system (8 row folding) Oil bath row unit drive chain (8 row rigid / 12 row) Gearbox driven row units 15.7 in. diameter auger Auger drive slip clutch Automatic header height control w/Terrain Tracker® Header recognition module Feeder opening shroud with ear deflector Individual row unit slip clutches Disengageable stalk chopping gearboxes Low profile row units Polyethylene row unit shields and points with quick latches for flip up Ear savers Chain removal tool for quick easy chain removal Pinching greasable knife type, two piece stalk roll with front bearing support Weed knives
      2606 - 30.0" Spacing - wt. 4,431 lbs.
      2608 - 30.0" Spacing - wt. 5,732 lbs.2608F - 30.0" Spacing - wt. 6,085 lbs.
      WEIGHTS
      2606 - 30.0" Spacing - wt. 4,431 lbs. 2608 - 30.0" Spacing - wt. 5,732 lbs. 2612 - 30.0" Spacing - wt. 8,598 lbs. 2608F - 30.0" Spacing - wt. 6,085 lbs.
      STANDARD FEATURES: (continued)
      Spring tensioned gathering chains w/ chrome pins Hydraulic adjustable deck plates Road transport warning lamps Case IH standard warranty applies
      Requirements for Operation:
      THE MODEL 2600 CHOPPING HEAD CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE THROUGH DECEMBER
      SHIPPING PERIOD:
      BEGINS THE FOLLOWING APRIL - JULY
    • STANDARD FEATURES:
      Single lever quick attach header latching system Hydraulic multi-coupler connector Single point electrical wiring coupler Telescoping drivelines with torque-free alignment coupling for easy hook-Up Driveline lubrication system (8 row folding) Oil bath row unit drive chain (8 row rigid / 12 row) Gearbox driven row units 15.7 in. diameter auger Auger drive slip clutch Automatic header height control w/Terrain Tracker® Header recognition module Feeder opening shroud with ear deflector Individual row unit slip clutches Disengageable stalk chopping gearboxes Low profile row units Polyethylene row unit shields and points with quick latches for flip up Ear savers Chain removal tool for quick easy chain removal Pinching greasable knife type, two piece stalk roll with front bearing support Weed knives
      2606 - 30.0" Spacing - wt. 4,431 lbs.
      2608 - 30.0" Spacing - wt. 5,732 lbs.2608F - 30.0" Spacing - wt. 6,085 lbs.
      WEIGHTS
      2606 - 30.0" Spacing - wt. 4,431 lbs. 2608 - 30.0" Spacing - wt. 5,732 lbs. 2612 - 30.0" Spacing - wt. 8,598 lbs. 2608F - 30.0" Spacing - wt. 6,085 lbs.
      STANDARD FEATURES: (continued)
      Spring tensioned gathering chains w/ chrome pins Hydraulic adjustable deck plates Road transport warning lamps Case IH standard warranty applies
      Requirements for Operation:
      THE MODEL 2600 CHOPPING HEAD CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE THROUGH DECEMBER
      SHIPPING PERIOD:
      BEGINS THE FOLLOWING APRIL - JULY
    • STANDARD FEATURES:
      Single lever quick attach header latching system Hydraulic multi-coupler connector Single point electrical wiring coupler Telescoping drivelines with torque-free alignment coupling for easy hook-Up Driveline lubrication system (8 row folding) Oil bath row unit drive chain (8 row rigid / 12 row) Gearbox driven row units 15.7 in. diameter auger Auger drive slip clutch Automatic header height control w/Terrain Tracker® Header recognition module Feeder opening shroud with ear deflector Individual row unit slip clutches Disengageable stalk chopping gearboxes Low profile row units Polyethylene row unit shields and points with quick latches for flip up Ear savers Chain removal tool for quick easy chain removal Pinching greasable knife type, two piece stalk roll with front bearing support Weed knives
      2606 - 30.0" Spacing - wt. 4,431 lbs.
      2608 - 30.0" Spacing - wt. 5,732 lbs.2608F - 30.0" Spacing - wt. 6,085 lbs.
      WEIGHTS
      2606 - 30.0" Spacing - wt. 4,431 lbs. 2608 - 30.0" Spacing - wt. 5,732 lbs. 2612 - 30.0" Spacing - wt. 8,598 lbs. 2608F - 30.0" Spacing - wt. 6,085 lbs.
      STANDARD FEATURES: (continued)
      Spring tensioned gathering chains w/ chrome pins Hydraulic adjustable deck plates Road transport warning lamps Case IH standard warranty applies
      Requirements for Operation:
      THE MODEL 2600 CHOPPING HEAD CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE THROUGH DECEMBER
      SHIPPING PERIOD:
      BEGINS THE FOLLOWING APRIL - JULY