• Summary

Your Summary

CORN HEADS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • For 2500 series and prior combines with
    Legacy feeder house.
    STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4206 - 30.0" Spacing - wt. 4,165 lbs.
    4206 Chopping- 30" Spacing -
    wt. 4,431 lbs.
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • For 2500 series and prior combines with
    Legacy feeder house.
    STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4208 - 30.0" Spacing - wt. 5,780 lbs.
    4208 - 30.0" Spacing Chopping
    wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. Oil bath main drive chains. 8 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4406 - 30.0" Spacing - wt. 4,431 lbs.4406 - 36.0" Spacing - wt. 4,740 lbs. 4406 - 38.0" Spacing - wt. 4,740 lbs.
    with stalk chopping
    4406 - 30.0" Spacing - wt. TBD4406 - 36.0" Spacing - wt. TBD 4406 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts.
    Oil bath main drive chains.
    6 Row standard head uses one #60 double strand chain. 6 Row chopping head uses two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4408 - 30.0" Spacing - wt. 5,780 lbs.4408 - 36.0" Spacing - wt. 6,315 lbs. 4408 - 38.0" Spacing - wt. 6,315 lbs.
    with stalk chopping
    4408 - 30.0" Spacing - wt. TBD4408 - 36.0" Spacing - wt. TBD 4408 - 38.0" Spacing - wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 6 and 8 row heads use two #60 chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4412 - 30.0" Spacing - wt. 8,589 lbs.
    4412 - 30.0" Spacing chopping
    wt. TBD
    STANDARD FEATURES: (continued)
    Fully adjustable weed knives Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 12 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • STANDARD FEATURES:
    Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position. Auger drive with radial pin slip clutch Low profile poly hoods and dividers Hoods incorporate patented "Corn Louvers" for enhanced grain savings Dividers and hoods come standard with replaceable wear strips. Rear hoods include a gas strut to assist in opening hoods for service.
    Gathering chains are precision roller chain
    for longer life. Precision chain utilizesmore bushings and chrome pins for higher load capacity. Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual radial pin slip clutch Full frame row unit with front stalk roll bearing support
    WEIGHTS
    4412F Standard - 30.0" Spacing -wt. 9,686 lbs.
    4412F Chopping - 30.0" Spacing
    - wt. 10,418 lbs.
    Fully adjustable weed knives
    Hydraulic adjustable stripper plates Fixed stripper plates adjustable.
    Heavy Duty row unit gearbox with
    forged gears and hardened shafts. oil bath main drive chains. 12 row heads use two #60 double strand chains.
    Point to Point pinching style stalk rolls
    with six sided drive couplers.High capacity spiral stalk rolls with double roller bearing (greaseable design)
    Telescoping drive lines with torque-free
    alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control
    Gathering chain Removal tool.
    Case IH Standard Warranty Applies
    Requirements for Operation:
    See Ordering Guide for Corn Head Applications
     
    4412F CORNHEADS CAN ONLY BE UNTILIZED ON NEW 7230/8230/9230 COMBINES. * * * * * * * * * * * * * * * * * * * * * * * TIRE REQUIREMENTS DRIVE TIRES MUST BE DUAL 620/70 R42 LI 166 A8 R1W REAR STEER TIRES MUST BE 750/65 R26 166 A8 * * * * * * * * * * * * * * * * * * * * * 7230 model requires a HD lift package tooperate a 4412F cornhead
    Optional stalk choppers use 4-6 hp per
    row in addition to standard row units.
  • 3206 Corn Head for 2500 Series Combines [ Versions ]
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3206 - 27.5" Spacing - wt. 4,200 lbs.3206 - 30.0" Spacing - wt. 4,165 lbs. 3206 - 36.0" Spacing - wt. 4,740 lbs. 3206 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
      Requirements for Operation:
      See Ordering Guide for Corn Head Applications
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3206 - 27.5" Spacing - wt. 4,200 lbs.3206 - 30.0" Spacing - wt. 4,165 lbs. 3206 - 36.0" Spacing - wt. 4,740 lbs. 3206 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
      Requirements for Operation:
      See Ordering Guide for Corn Head Applications
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3206 - 27.5" Spacing - wt. 4,200 lbs.3206 - 30.0" Spacing - wt. 4,165 lbs. 3206 - 36.0" Spacing - wt. 4,740 lbs. 3206 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
      Requirements for Operation:
      See Ordering Guide for Corn Head Applications
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3206 - 27.5" Spacing - wt. 4,200 lbs.3206 - 30.0" Spacing - wt. 4,165 lbs. 3206 - 36.0" Spacing - wt. 4,740 lbs. 3206 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
      Requirements for Operation:
      See Ordering Guide for Corn Head Applications
  • 3208 Corn Head for 2500 Series Combines [ Versions ]
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3208 - 22.0" Spacing - wt. 4,950 lbs. 3208 - 27.5" Spacing - wt. 5,780 lbs. 3208 - 30.0" Spacing - wt. 5,780 lbs. 3208 - 36.0" Spacing - wt. 6,315 lbs. 3208 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Cantilevered, heat treated, modular stalkrolls Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3208 - 22.0" Spacing - wt. 4,950 lbs. 3208 - 27.5" Spacing - wt. 5,780 lbs. 3208 - 30.0" Spacing - wt. 5,780 lbs. 3208 - 36.0" Spacing - wt. 6,315 lbs. 3208 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Cantilevered, heat treated, modular stalkrolls Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3208 - 22.0" Spacing - wt. 4,950 lbs. 3208 - 27.5" Spacing - wt. 5,780 lbs. 3208 - 30.0" Spacing - wt. 5,780 lbs. 3208 - 36.0" Spacing - wt. 6,315 lbs. 3208 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Cantilevered, heat treated, modular stalkrolls Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3208 - 22.0" Spacing - wt. 4,950 lbs. 3208 - 27.5" Spacing - wt. 5,780 lbs. 3208 - 30.0" Spacing - wt. 5,780 lbs. 3208 - 36.0" Spacing - wt. 6,315 lbs. 3208 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Cantilevered, heat treated, modular stalkrolls Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support
      WEIGHTS
      3208 - 22.0" Spacing - wt. 4,950 lbs. 3208 - 27.5" Spacing - wt. 5,780 lbs. 3208 - 30.0" Spacing - wt. 5,780 lbs. 3208 - 36.0" Spacing - wt. 6,315 lbs. 3208 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Cantilevered, heat treated, modular stalkrolls Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
  • 3212 Corn Head for 2500 Series Combines [ Versions ]
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch
      WIEGHTS
      3212 - 20.0" Spacing - wt. 7,1653212 - 22.0" Spacing - wt. 7,670 3212 - 30.0" Spacing - wt. 8,510
      STANDARD FEATURES: (continued)
      Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines TerrainTracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch
      WIEGHTS
      3212 - 20.0" Spacing - wt. 7,1653212 - 22.0" Spacing - wt. 7,670 3212 - 30.0" Spacing - wt. 8,510
      STANDARD FEATURES: (continued)
      Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines TerrainTracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
    • For 2500 series and prior combines STANDARD FEATURES:
      Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers Row unit gear case with individual slip clutch
      WIEGHTS
      3212 - 20.0" Spacing - wt. 7,1653212 - 22.0" Spacing - wt. 7,670 3212 - 30.0" Spacing - wt. 8,510
      STANDARD FEATURES: (continued)
      Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines TerrainTracker® ready Gear box main drive with (2) speeds Oil bath main drive chain (for row units) Peripheral corn head lighting Pre-wired for Terrain Tracker® and Auto Header Height Control Pinching style stalk rolls Hydraulic adjustable stripper plates Case IH Standard Warranty Applies
  • 3406 Corn Head for AF 5088/6088/7088/7120/8120 [ Versions ]
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3406 - 27.5" Spacing - wt. 4,165 lbs. 3406 - 30.0" Spacing - wt. 4,165 lbs. 3406 - 36.0" Spacing - wt. 4,740 lbs. 3406 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3406 - 27.5" Spacing - wt. 4,165 lbs. 3406 - 30.0" Spacing - wt. 4,165 lbs. 3406 - 36.0" Spacing - wt. 4,740 lbs. 3406 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3406 - 27.5" Spacing - wt. 4,165 lbs. 3406 - 30.0" Spacing - wt. 4,165 lbs. 3406 - 36.0" Spacing - wt. 4,740 lbs. 3406 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3406 - 27.5" Spacing - wt. 4,165 lbs. 3406 - 30.0" Spacing - wt. 4,165 lbs. 3406 - 36.0" Spacing - wt. 4,740 lbs. 3406 - 38.0" Spacing - wt. 4,740 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
  • 3408 Corn Head for AF 5088/6088/7088/7120/8120 [ Versions ]
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3408 - 22.0" Spacing - wt. 4,950 lbs. 3408 - 27.5" Spacing - wt. 5,780 lbs. 3408 - 30.0" Spacing - wt. 5,780 lbs. 3408 - 36.0" Spacing - wt. 6,315 lbs. 3408 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lightin Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3408 - 22.0" Spacing - wt. 4,950 lbs. 3408 - 27.5" Spacing - wt. 5,780 lbs. 3408 - 30.0" Spacing - wt. 5,780 lbs. 3408 - 36.0" Spacing - wt. 6,315 lbs. 3408 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lightin Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3408 - 22.0" Spacing - wt. 4,950 lbs. 3408 - 27.5" Spacing - wt. 5,780 lbs. 3408 - 30.0" Spacing - wt. 5,780 lbs. 3408 - 36.0" Spacing - wt. 6,315 lbs. 3408 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lightin Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3408 - 22.0" Spacing - wt. 4,950 lbs. 3408 - 27.5" Spacing - wt. 5,780 lbs. 3408 - 30.0" Spacing - wt. 5,780 lbs. 3408 - 36.0" Spacing - wt. 6,315 lbs. 3408 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lightin Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3408 - 22.0" Spacing - wt. 4,950 lbs. 3408 - 27.5" Spacing - wt. 5,780 lbs. 3408 - 30.0" Spacing - wt. 5,780 lbs. 3408 - 36.0" Spacing - wt. 6,315 lbs. 3408 - 38.0" Spacing - wt. 6,315 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lightin Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
  • 3412 Corn Head for AF 6088/7088/7120/8120 [ Versions ]
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3412 - 20.0" Spacing - wt. 7,165 lbs. 3412 - 22.0" Spacing - wt. 7,670 lbs. 3412 - 30.0" Spacing - wt. 8,510 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3412 - 20.0" Spacing - wt. 7,165 lbs. 3412 - 22.0" Spacing - wt. 7,670 lbs. 3412 - 30.0" Spacing - wt. 8,510 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
      WEIGHTS
      3412 - 20.0" Spacing - wt. 7,165 lbs. 3412 - 22.0" Spacing - wt. 7,670 lbs. 3412 - 30.0" Spacing - wt. 8,510 lbs.
      STANDARD FEATURES: (continued)
      Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
  • STANDARD FEATURES:
    Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
    WEIGHTS
    3416 - 30.0" Spacing - wt. 10,825 lbs.
    STANDARD FEATURES: (continued)
    Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies
  • STANDARD FEATURES:
    Single lever, quick attach header latching system Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 16 in. (406 mm) dia., open conveying, with adjustable position Stainless steel auger trough Auger drive slip clutch Ear corn deflectors Spring tensioned gatherer chains w/chrome pins Low profile poly hoods and dividers Quick latches for flip-up row unit hoods and dividers
    WEIGHT
    3418 - 20.0" Spacing - wt. 11,000 lbs.
    STANDARD FEATURES: (continued)
    Row unit gear case with individual slip clutch Full frame row unit with front stalk roll bearing support Two piece weed knives Telescoping drive lines with torque-free alignment coupling for easy hook-up Drivelines Terrain Tracker® ready Oil bath main drive chain (for row units) Peripheral corn head lighting Pinching style stalk rolls Hydraulic deck plate adjustment Case IH Standard Warranty Applies