• Summary

Your Summary

DC SERIES ROTARY DISC MOWER CONDITONERS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • CUTTERBED:
    13 ft. (4.0m) cutting width 8 Disc Modular Cutterbar Vertical and lateral flotation Adjustable flotation springs Cutterbar shock protection system PTO drive with slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
    CONDITIONING SYSTEMS:
    Conditioning Rolls: 125 in. (3175m) wide, 10.4 in. (264mm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive - roll drive speed is changeable by swapping the drive and driven sheaves
    Flail Conditioning:
    125 in. (3175mm) rotor with 120 tapered flails Adjustable rotor hood with replaceable smooth liner Adjustable Flail Speeds - 1042 or 752 rpm by replacing the sheaves
    FRAME:
    Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 12.5L x 15 8 PR, Implement Tires
    DRIVE:
    1000 RPM Drive 1-3/8 in., 21 spline PTO
    HITCH:
    Swivel hitch with a drawbar or 2 point hitch mount
    MISCELLANEOUS:
    Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Poly bi-fold doors for easy cutterbar access
    Requirements for Operation:
    90 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • CUTTERBED:
    13 ft. (4.0m) cutting width 8 Disc Modular Cutterbar Vertical and lateral flotation Adjustable flotation springs Cutterbar shock protection system PTO drive with slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
    CONDITIONING SYSTEMS:
    Conditioning Rolls: 125 in. (3175m) wide, 10.4 in. (264mm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive - roll drive speed is changeable by swapping the drive and driven sheaves
    Flail Conditioning:
    125 in. (3175mm) rotor with 120 tapered flails Adjustable rotor hood with replaceable smooth liner Adjustable Flail Speeds - 1042 or 752 rpm by replacing the sheaves
    FRAME:
    Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 12.5L x 15 8 PR, Implement Tires
    DRIVE:
    1000 RPM Drive 1-3/8 in., 21 spline PTO
    HITCH:
    Swivel hitch with a drawbar or 2 point hitch mount
    MISCELLANEOUS:
    Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Poly bi-fold doors for easy cutterbar access
    Requirements for Operation:
    90 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • CUTTERBED:
    16 ft. 3 in. ( 4.95m) cutting width 10 Disc Modular Cutterbar Vertical and lateral flotation Adjustable flotation springs Cutterbar shock protection system PTO drive with slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
    CONDITIONING SYSTEMS:
    Conditioning Rolls: 125 in. (3175mm) wide, 10.4 in. (264mm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive- roll drive speed is changeable by swapping the drive and driven sheaves
    Flail Conditioning:
    125 in. (3175mm) rotor with 120 tapered flails Adjustable rotor hood with replaceable smooth liner Adjustable Flail Speeds - 1042 or 752 rpm by replacing the sheaves
    FRAME:
    Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 12.5L x 15 8 PR, Implement Tires Transport Ready
    DRIVE:
    1000 RPM Drive 1-3/8 in., 21 spline PTO
    HITCH:
    Swivel hitch with a drawbar or 2 point hitch mount
    MISCELLANEOUS:
    Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Poly bi-fold doors for easy cutterbar access
    Requirements for Operation:
    100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • CUTTERBED:
    16 ft. 3 in. ( 4.95m) cutting width 10 Disc Modular Cutterbar Vertical and lateral flotation Adjustable flotation springs Cutterbar shock protection system PTO drive with slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
    CONDITIONING SYSTEMS:
    Conditioning Rolls: 125 in. (3175mm) wide, 10.4 in. (264mm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive- roll drive speed is changeable by swapping the drive and driven sheaves
    Flail Conditioning:
    125 in. (3175mm) rotor with 120 tapered flails Adjustable rotor hood with replaceable smooth liner Adjustable Flail Speeds - 1042 or 752 rpm by replacing the sheaves
    FRAME:
    Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 12.5L x 15 8 PR, Implement Tires Transport Ready
    DRIVE:
    1000 RPM Drive 1-3/8 in., 21 spline PTO
    HITCH:
    Swivel hitch with a drawbar or 2 point hitch mount
    MISCELLANEOUS:
    Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Poly bi-fold doors for easy cutterbar access
    Requirements for Operation:
    100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • CUTTERBED:
    16 ft. 3 in. ( 4.95m) cutting width 10 Disc Modular Cutterbar Vertical and lateral flotation Adjustable flotation springs Cutterbar shock protection system PTO drive with slip clutch to bevel gearbox at LH end of header, vertical PTO shaft to cutterbar
    CONDITIONING SYSTEMS:
    Conditioning Rolls: 125 in. (3175mm) wide, 10.4 in. (264mm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive- roll drive speed is changeable by swapping the drive and driven sheaves
    Flail Conditioning:
    125 in. (3175mm) rotor with 120 tapered flails Adjustable rotor hood with replaceable smooth liner Adjustable Flail Speeds - 1042 or 752 rpm by replacing the sheaves
    FRAME:
    Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 12.5L x 15 8 PR, Implement Tires Transport Ready
    DRIVE:
    1000 RPM Drive 1-3/8 in., 21 spline PTO
    HITCH:
    Swivel hitch with a drawbar or 2 point hitch mount
    MISCELLANEOUS:
    Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Poly bi-fold doors for easy cutterbar access
    Requirements for Operation:
    100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • DC102 Disc Mower Conditioner [ Versions ]
    • CUTTERBED:
      10 ft. 4 in. (3.15m) cutting width 8 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1000 RPM)
      FRAME:
      Side Pull Design Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 11L x 15, 6 PR Heavy Implement Tires (conditioning roll models) 9.5L x 14, 6 PR Heavy Implement Tires (flail model)
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Standard tongue includes tire bumper
      Requirements for Operation:
      80 PTO horsepower minimum Only for use with tractors having a fully enclosed cab.
    • CUTTERBED:
      10 ft. 4 in. (3.15m) cutting width 8 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1000 RPM)
      FRAME:
      Side Pull Design Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 11L x 15, 6 PR Heavy Implement Tires (conditioning roll models) 9.5L x 14, 6 PR Heavy Implement Tires (flail model)
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Standard tongue includes tire bumper
      Requirements for Operation:
      80 PTO horsepower minimum Only for use with tractors having a fully enclosed cab.
    • CUTTERBED:
      10 ft. 4 in. (3.15m) cutting width 8 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1000 RPM)
      FRAME:
      Side Pull Design Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 11L x 15, 6 PR Heavy Implement Tires (conditioning roll models) 9.5L x 14, 6 PR Heavy Implement Tires (flail model)
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner Standard tongue includes tire bumper
      Requirements for Operation:
      80 PTO horsepower minimum Only for use with tractors having a fully enclosed cab.
  • DC132 Disc Mower Conditioner [ Versions ]
    • CUTTERBED:
      13 ft. (3.96m) cutting width 10 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      90 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
    • CUTTERBED:
      13 ft. (3.96m) cutting width 10 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      90 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
    • CUTTERBED:
      13 ft. (3.96m) cutting width 10 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      90 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • DC162 Disc Mower Conditioner [ Versions ]
    • CUTTERBED:
      15 ft. 7 in. ( 4.75m) cutting width 12 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires Transport Ready
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
    • CUTTERBED:
      15 ft. 7 in. ( 4.75m) cutting width 12 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires Transport Ready
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
    • CUTTERBED:
      15 ft. 7 in. ( 4.75m) cutting width 12 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 102 in. (2.59m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure High-speed conditioner roll drive Crop Lifters
      Flail Conditioning:
      102 in. (2.59m) rotor with 100 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1011 RPM)
      FRAME:
      Center Pivot Frame Hydraulic Header Tilt Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 31 x 13.5-15 8 PR, Implement Tires Transport Ready
      DRIVE:
      1000 RPM Drive 1-3/8 in., 21 spline PTO
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      100 PTO horsepower minimum Only for use with tractors having fully enclosed cab.
  • DC92 Disc Mower Conditioner [ Versions ]
    • CUTTERBED:
      9 ft. 2 in. (2.8m) cutting width 7 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 90 in. (2.29m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure Crop Lifters
      Flail Conditioning:
      90 in. (2.29m) rotor with 90 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1016 RPM)
      FRAME:
      Side Pull Design Mechanical header angle adjustment Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 9.5L x 14 6 PR, Heavy Implement Tires
      DRIVE:
      540 RPM PTO drive 80º constant velocity PTO drive shaft
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      65 PTO horsepower minimum Only for use with tractors having a fully enclosed cab.
    • CUTTERBED:
      9 ft. 2 in. (2.8m) cutting width 7 Disc Modular Cutterbar Vertical and radial flotation Adjustable flotation springs Cutterbar shock protection system
      CONDITIONING SYSTEMS:
      Conditioning Rolls: 90 in. (2.29m) wide, 10-3/8 in. (26.35cm) diameter intermeshing Automatic on-the-go roll separation Single crank adjustable roll pressure Crop Lifters
      Flail Conditioning:
      90 in. (2.29m) rotor with 90 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor (1016 RPM)
      FRAME:
      Side Pull Design Mechanical header angle adjustment Hydraulic Tongue Swing Adjustable Windrow Shields Adjustable Swath Gate 9.5L x 14 6 PR, Heavy Implement Tires
      DRIVE:
      540 RPM PTO drive 80º constant velocity PTO drive shaft
      MISCELLANEOUS:
      Highway Transport Chain Conveniently located toolbox Complete transport lights per ASAE S279.11 High density polyethylene impact resistant hood liner
      Requirements for Operation:
      65 PTO horsepower minimum Only for use with tractors having a fully enclosed cab.