2. Select a model

• True-Tandem 340 Disk CUSH [ Versions ]
  • - 7.5 in. - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
• True-Tandem 340 Disk RIG [ Versions ]
  • - 7.5 in. - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 7.5 in. - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
  • - 9 in. - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring cushioned self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability; 19-22 ft. sizes use 4 x 6 in. fore-aft tubes; 25-31ft. sizes use 6 x 6 in. fore-aft tubes; and 34 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.)

    UNITIZED GANGS (pre-assembled):
    

    Rectangular tube gang bars 5 x 3 in. w/bolted on heavy-duty nodular iron bearing standards Rigid Gang Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount. Cushion Gang Bearing - Precision type regreasable, triple sealed trunnion mounted bearing with bushings in a nodular iron housing. 18° angle front and rear 1-1/2 in. round spring steel arbor bolts Nodular iron spacing spools with machined ends Spacing: 7.5 in. (recommended for seedbed) or 9 in. (recommended for primary tillage or higher residue conditions) Flex or Rigid Arm Spring type scrapers adjustable individually or by complete gang. Integral furrow filler on rear gang

    BLADES:
    

    Earth Metal crimped center disk blades Diameter: 20 in. or 22 in. Thickness: .177 in., .197 in. and .256 in. are available Three blade edges are available: * Solid - recommended for general purpose and rocky conditions * Notched (9" spacing Rigid Gang Only) - recommended for high residue cutting, non-rocky conditions * #11 (reverse bevel) solid edge - Blades are sharper than standard solid blades; recommended for high residue conditions and non-rocky tough dry soils.

    WHEELS AND TIRES:
    

    19 and 22 ft. sizes Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings 25 - 34 ft. sizes Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (load range F) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Master and slave lift system: 3-1/2 x 8, 3-1/4 x 8 in. hydraulic cylinders on 19 and 22 ft. 4 x 8, 3-3/4 x 8 hydraulic cylinders on 25 through 31 ft. 4-1/4 x 8, 4 x 8 hydraulic cylinders on 34ft. 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 3-1/2 x 42 in. hydraulic cylinders on 19 through 25 ft. machines 4 x 42 in. hydraulic cylinders on 28 through 34 ft. machines

    WORKING WIDTHS (W/O REAR HARROW):
    

    @ 7.5 in. Recommended Nominal Spacing Crumbler 110 Size ------- ------------ ------------- 19 ft. 18 ft. 8 in. 22.5 ft. 22 ft. 22 ft. 2 in. 25 ft. 25 ft. 24 ft. 7 in. 30 ft. 28 ft. 28 ft. 2 in. 32.5 ft. 31 ft. 31 ft. 8 in. 35 ft. 34 ft 34 ft. 1 in. 37.5 ft.

    @ 9 in. Recommended
    

    Nominal Spacing Crumbler 110 Size------- ------------ ------------- 19 ft. 19 ft. 4 in. 25 ft. 22 ft. 22 ft. 2 in. 27.5 ft. 25 ft. 25 ft. 30 ft. 28 ft. 27 ft. 10 in. 32.5 ft. 31 ft. 30 ft. 8 in. 37.5 ft. 34 ft. 33 ft. 7 in. 40 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 7 in. (3.8 m) on 19 and 22 ft. machines 15 ft. 1 in. (4.6 m) on 25 through 31ft. machines 17 ft. 10 in. (5.4 m) on 34 ft. machine

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    9 ft. 10 in. (3.0 m) on 19 ft. machine 11 ft. 2 in. (3.4 m) on 22 and 25 ft. machines 12 ft. 6 in. (3.8 m) on 28 ft. machine 13 ft. 9 in. (4.2 m) on 31 and 34 ft. machines

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to three hydraulic remote valves
    

    Operating guidelines vary with soil conditions.

    Recommended ground speed:
    

    4.5 - 6 mph HP/foot 8-12 engine hp

    Requirements for Operation: (continued)
    

    Engine horsepower required for secondary tillage operations (2 - 4 in. depth). 19 ft. - 150 - 230 hp 22 ft. - 175 - 265 hp 25 ft. - 200 - 300 hp 28 ft. - 225 - 335 hp 31 ft. - 245 - 375 hp 34 ft. - 270 - 410 hp Approximate hp conversion note: to convert engine hp to PTO hp multiply by 0.86; to convert engine hp to drawbar hp, multiply by 0.74.
• True-Tandem 370 Disk CUSH [ Versions ]
  • - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 37 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 42 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 47 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
• True-Tandem 370 Disk RIG [ Versions ]
  • - 19 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 22 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 25 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 28 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 31 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 34 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 37 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 42 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp
  • - 47 ft.

    STANDARD FEATURES
    HITCH:
    

    Spring-cushioned, self-leveling with "Perfect Hitch" tongue for tractor auto-pin compatibility for clevis-type tractor drawbar.

    FRAME:
    

    Heavy welded tubing and cross-bracing for durability 19 and 22 ft. size uses 4 x 6 in. fore-aft tubes 25 ft. size uses 6 x 6 in. fore-aft tubes 28 ft., 31 ft. to 37 ft. size uses twin fore-aft tubes (4 x 6 in. and 6 x 6 in.) 42 ft. to 47 ft. use 6 x 6 in. tubes on wings and 6 x 8 in. tubes on mainframe

    UNITIZED GANGS (pre-assembled):
    

    (continued) Front gang: Shallow concavity Earth Metal disk blades Rear Gang: Standard concavity Earth Metal disk blades

    BLADES:
    

    Earth Metal Crimped Center Disk Blades Diameter: 24 in. Thickness: .197 in. (recommended for normal conditions) or .256 in. (recommended for severe or rocky conditions). Spacing: 9 in. Operating depth: Up to 6 in. Integral furrow-filler and tri-lobe feathering blades on rear gangs.

    WHEELS AND TIRES:
    

    19 and 22 foot: Dual 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10 PR mainframe; single 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    25 through 34 foot:
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 FI (F rated) tires on MF; Dual 6-bolt heavy-duty hubs with replaceable spindles, with 11L x 15 8PR tires on wings

    WHEELS AND TIRES: (continued)
    

    37 foot Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 16.1 14PR tires on MF, walking tandem 8-bolt heavy-duty hubs with replaceable spindles, with 12.5 x 15 SL 14PR tires and one-way 7.6 x 15 6PR pivoting stabilizer wheels on wings

    42 through 47 foot
    

    Walking tandem axles with 8-bolt heavy-duty hubs with replaceable spindles, with 16.5 x 16.1 FI (E) tires on MF, Walking tandem 6-bolt heavy-duty hubs with replaceable spindles, with 12.5L x 15 10PR tires on all wings. Adjustable castoring gauge wheels on outer wings with 9.5L x 15 SL 8PR tires

    HYDRAULICS AND TRANSPORT SYSTEM:
    

    Single point depth adjustment hydraulic depth control Hydraulic lift system: 19 ft. through 25 ft. 4 x 8, 3-3/4 x 8 rephasing hydraulic cylinders 28 ft. through 34 ft. 4-1/4 x 8, 4 x 8 rephasing hydraulic cylinders 37 ft. 4-1/2 x 8, 4.25 x 8 rephasing hydraulic cylinders 42 ft. through 47 ft. rephasing cylinders 4-1/4 x 12 in. on main frame 4 x 12 hydraulic cylinders on inner wings

    HYDRAULICS AND TRANSPORT
    

    SYSTEM: (continued) Hydraulic lift system: 3-3/4 x 12 in. hydraulic cylinders on outer wings and 3-1/2 x 12 in. hydraulic cylinders on front gauge wheel, rephasing cylinders, hoses and fittings 3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hosed to tractor Hydraulic Folding Wings 19 ft. and 22 ft. machines 3-1/2 x 42 in. hydraulic cylinders 25 ft. and 28 ft. machines 4 x 42 in. hydraulic cylinders 31 ft. and 37 ft. machines 4-1/4 x 42 in. hydraulic cylinders 42 ft. through 47 ft. 4 x 36 in. hydraulic cylinders rear inner wings, 3-1/2 x 36 in. cylinders front inner wings; 4-1/2 x 36 in. hydraulic cylinders rear outer wings on 47 ft.; 4 x 36 in. hydraulic cylinders rear outer wings on 42 ft.

    WORKING WIDTHS (W/O REAR HARROW):
    

    Recommended Nominal Actual Crumbler 110 Size ------- ------------- ----------- 19 ft. 19 ft. 6 in. 25 ft. 22 ft. 22 ft. 4 in. 27.5 ft. 25 ft. 25 ft. 2 in. 30 ft. 28 ft. 28 ft. 1 in. 32.5 ft. 31 ft. 30 ft. 11 in. 37.5 ft. 34 ft. 33 ft. 9 in. 40 ft. 37 ft. 36 ft. 7 in. 42.5 ft. 42 ft. 42 ft. 4 in. 45 ft. 47 ft. 46 ft. 7 in. 50 ft.

    TRANSPORT WIDTH (W/O REAR HARROW):
    

    12 ft. 9 in. (3.89 m) on 19 through 22 ft. 15 ft. 3 in. (4.65 m ) on 25 ft. 18 ft. on (5.49 m) 28 through 37 ft. 18 ft. 6 in. (5.64 m) 42 through 47 ft.

    TRANSPORT HEIGHT (W/O REAR HARROW):
    

    10 ft. 7 in. (3.23 m) on 19 ft. 11 ft. 11 in. (3.63 m) on 22 through 28 ft. 12 ft. 11 in. (3.94 m) on 31 ft. 14 ft. 3 in. (4.34 m) on 34 ft. 15 ft. 4 in. (4.67 m) on 37 ft. 13 ft. 4 in. (4.06 m) on 42 through 47 ft.

    MISCELLANEOUS:
    

    Front hitch jack ASAE Highway transport chain Combination warning and tail lights with 7-pin connector SMV emblem and reflectors Swinging hydraulic hose holder and operator's manual storage container

    Requirements for Operation:
    

    12 volt electrical system and a 7 pin connector wired to supply power to transport lighting

    Minimum required tractor hydraulic
    

    pressure: 2200 PSI

    Up to 3 hydraulic remote valves
    

    Operating guidelines vary with soil conditions

    Recommended ground speed:
    

    5 - 7 mph Hp/foot - 10-13 engine hp Engine horsepower required for Primary Tillage operations (Up to 6 in. depth). 19 ft. - 190-245 hp 22 ft. - 220-285 hp 25 ft. - 250-325 hp 28 ft. - 275-365 hp 31 ft. - 305-400 hp 34 ft. - 335-445 hp 37 ft. - 365-485 hp 42 ft. - 385-535 hp 47 ft. - 435-535 hp