• Summary

Your Summary

FERTILIZER APPLICATORS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • NUTRI-PLACER 5300 [ Versions ]
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      Mounted have Cat II / III 3-point hitch
      FRAME AND WINGS:
      4 in. x 6 in. tubing Mounted units have double-bar 27 in. rank and offset U-Channels for added strength Mounted units 32.5 foot and smaller have 13 in. 8 ft. mainframe while 37.5 foot unit has 16 ft. 2 in. mainframe
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors Mounted units have optional in-line transport system
      TRANSPORT DIMENSIONS:
      Mounted 22.5 ft & up: Width Height 17 ft. 3 in. 12 ft. (max)
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      Mounted have Cat II / III 3-point hitch
      FRAME AND WINGS:
      4 in. x 6 in. tubing Mounted units have double-bar 27 in. rank and offset U-Channels for added strength Mounted units 32.5 foot and smaller have 13 in. 8 ft. mainframe while 37.5 foot unit has 16 ft. 2 in. mainframe
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors Mounted units have optional in-line transport system
      TRANSPORT DIMENSIONS:
      Mounted 22.5 ft & up: Width Height 17 ft. 3 in. 12 ft. (max)
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      Mounted have Cat II / III 3-point hitch
      FRAME AND WINGS:
      4 in. x 6 in. tubing Mounted units have double-bar 27 in. rank and offset U-Channels for added strength Mounted units 32.5 foot and smaller have 13 in. 8 ft. mainframe while 37.5 foot unit has 16 ft. 2 in. mainframe
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors Mounted units have optional in-line transport system
      TRANSPORT DIMENSIONS:
      Mounted 22.5 ft & up: Width Height 17 ft. 3 in. 12 ft. (max)
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      Mounted have Cat II / III 3-point hitch
      FRAME AND WINGS:
      4 in. x 6 in. tubing Mounted units have double-bar 27 in. rank and offset U-Channels for added strength Mounted units 32.5 foot and smaller have 13 in. 8 ft. mainframe while 37.5 foot unit has 16 ft. 2 in. mainframe
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors Mounted units have optional in-line transport system
      TRANSPORT DIMENSIONS:
      Mounted 22.5 ft & up: Width Height 17 ft. 3 in. 12 ft. (max)
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
  • NUTRI-PLACER 940 [ Versions ]
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two
      HITCH SYSTEM:
      Pull-type narrow profile with 6 in. x 10 in. tubing Class V Perfect Hitch Pull-type units have swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      6 in. x 6 in. tubing with welded cross/support tubes
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Requires two tractor remote valves to function Flow divider in fold circuit for even transport folding WHEELS AND TIRES: Tires and hubs are fully rated for loads Walking tandems for main frame 16.5 x 16.1 14PR Walking tandems for wings 12.5L-15 10PR Pin adjust Gauge wheel 20.5-8 load range D
      TRANSPORT:
      SMV emblem and reflectors Gravitational outer and mid wing locks 60,000 lb. Safety chain Combination warning and tail lights with 7-pin connection
      TRANSPORT DIMENTIONS:
      Pull type 50 - 65 ft.: Width Height 18 ft. 9 in. 13 ft. 9 in.
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two
      HITCH SYSTEM:
      Pull-type narrow profile with 6 in. x 10 in. tubing Class V Perfect Hitch Pull-type units have swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      6 in. x 6 in. tubing with welded cross/support tubes
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Requires two tractor remote valves to function Flow divider in fold circuit for even transport folding WHEELS AND TIRES: Tires and hubs are fully rated for loads Walking tandems for main frame 16.5 x 16.1 14PR Walking tandems for wings 12.5L-15 10PR Pin adjust Gauge wheel 20.5-8 load range D
      TRANSPORT:
      SMV emblem and reflectors Gravitational outer and mid wing locks 60,000 lb. Safety chain Combination warning and tail lights with 7-pin connection
      TRANSPORT DIMENTIONS:
      Pull type 50 - 65 ft.: Width Height 18 ft. 9 in. 13 ft. 9 in.
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two
      HITCH SYSTEM:
      Pull-type narrow profile with 6 in. x 10 in. tubing Class V Perfect Hitch Pull-type units have swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      6 in. x 6 in. tubing with welded cross/support tubes
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Requires two tractor remote valves to function Flow divider in fold circuit for even transport folding WHEELS AND TIRES: Tires and hubs are fully rated for loads Walking tandems for main frame 16.5 x 16.1 14PR Walking tandems for wings 12.5L-15 10PR Pin adjust Gauge wheel 20.5-8 load range D
      TRANSPORT:
      SMV emblem and reflectors Gravitational outer and mid wing locks 60,000 lb. Safety chain Combination warning and tail lights with 7-pin connection
      TRANSPORT DIMENTIONS:
      Pull type 50 - 65 ft.: Width Height 18 ft. 9 in. 13 ft. 9 in.
  • NUTRI-TILLER 950 [ Versions ]
    • TYPICAL USE:
      Strip-till in 30 in. rows for planting directly over the tilled row. Usual depth is 7 in. to 9 in. Performs one-pass in-row tillage, residue management, fertilizer placement and seed bed conditioning Optional fertilizer attachments allow Root Zone Banding of Anhydrous Ammonia, Liquid, Dry or any 2 of the 3
      HITCH SYSTEM:
      20 ft. Category 3 Hitch Clevis 30.5 ft. to 40 ft. Category 4 Hitch Clevis 60 ft. Category 5 Hitch Clevis
      FRAME AND WINGS:
      4 in. x 6 in. tubing on 20 ft. to 40 ft. machine 6 in. x 6 in. on 60 ft. machine
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Synchronized master-slave hydraulics on units with hydraulic wing wheels Single Point depth control
      WHEELS AND TIRES:
      20 ft. Tandem 11Lx15 FI (F), 8 bolt hub 30 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings
      WHEELS AND TIRES cont:
      40 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings 60 ft. 16.5Lx16.1 FI (E) on mainframe 12.5Lx15 FI wing tires 8 rear extension bars
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain (pull-type machines)
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type Width Height 16' 6" 13' 6" Double-fold Pull-Type Width Height 40 ft. 18' 6" 13' 6" 60 ft. 18' 9" 13' 9"
      ROW UNIT:
      Optional 24 inch heavy-duty coulters are tapered for self-sharpening to cut residue ahead of the shank Optional HCS™ edge-bent style High Clearance Shank provides 1,250 lbs. of holding force Optional Berm builder 18 in. diameter disks are adjustable and shape the berm Optional berm conditioner rolling baskets pre-settle the berm and reduce clods/valleys in the seed bed Optional Row Cleaners for tougher residue - Order from Factory Supplied
    • TYPICAL USE:
      Strip-till in 30 in. rows for planting directly over the tilled row. Usual depth is 7 in. to 9 in. Performs one-pass in-row tillage, residue management, fertilizer placement and seed bed conditioning Optional fertilizer attachments allow Root Zone Banding of Anhydrous Ammonia, Liquid, Dry or any 2 of the 3
      HITCH SYSTEM:
      20 ft. Category 3 Hitch Clevis 30.5 ft. to 40 ft. Category 4 Hitch Clevis 60 ft. Category 5 Hitch Clevis
      FRAME AND WINGS:
      4 in. x 6 in. tubing on 20 ft. to 40 ft. machine 6 in. x 6 in. on 60 ft. machine
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Synchronized master-slave hydraulics on units with hydraulic wing wheels Single Point depth control
      WHEELS AND TIRES:
      20 ft. Tandem 11Lx15 FI (F), 8 bolt hub 30 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings
      WHEELS AND TIRES cont:
      40 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings 60 ft. 16.5Lx16.1 FI (E) on mainframe 12.5Lx15 FI wing tires 8 rear extension bars
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain (pull-type machines)
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type Width Height 16' 6" 13' 6" Double-fold Pull-Type Width Height 40 ft. 18' 6" 13' 6" 60 ft. 18' 9" 13' 9"
      ROW UNIT:
      Optional 24 inch heavy-duty coulters are tapered for self-sharpening to cut residue ahead of the shank Optional HCS™ edge-bent style High Clearance Shank provides 1,250 lbs. of holding force Optional Berm builder 18 in. diameter disks are adjustable and shape the berm Optional berm conditioner rolling baskets pre-settle the berm and reduce clods/valleys in the seed bed Optional Row Cleaners for tougher residue - Order from Factory Supplied
    • TYPICAL USE:
      Strip-till in 30 in. rows for planting directly over the tilled row. Usual depth is 7 in. to 9 in. Performs one-pass in-row tillage, residue management, fertilizer placement and seed bed conditioning Optional fertilizer attachments allow Root Zone Banding of Anhydrous Ammonia, Liquid, Dry or any 2 of the 3
      HITCH SYSTEM:
      20 ft. Category 3 Hitch Clevis 30.5 ft. to 40 ft. Category 4 Hitch Clevis 60 ft. Category 5 Hitch Clevis
      FRAME AND WINGS:
      4 in. x 6 in. tubing on 20 ft. to 40 ft. machine 6 in. x 6 in. on 60 ft. machine
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Synchronized master-slave hydraulics on units with hydraulic wing wheels Single Point depth control
      WHEELS AND TIRES:
      20 ft. Tandem 11Lx15 FI (F), 8 bolt hub 30 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings
      WHEELS AND TIRES cont:
      40 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings 60 ft. 16.5Lx16.1 FI (E) on mainframe 12.5Lx15 FI wing tires 8 rear extension bars
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain (pull-type machines)
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type Width Height 16' 6" 13' 6" Double-fold Pull-Type Width Height 40 ft. 18' 6" 13' 6" 60 ft. 18' 9" 13' 9"
      ROW UNIT:
      Optional 24 inch heavy-duty coulters are tapered for self-sharpening to cut residue ahead of the shank Optional HCS™ edge-bent style High Clearance Shank provides 1,250 lbs. of holding force Optional Berm builder 18 in. diameter disks are adjustable and shape the berm Optional berm conditioner rolling baskets pre-settle the berm and reduce clods/valleys in the seed bed Optional Row Cleaners for tougher residue - Order from Factory Supplied
    • TYPICAL USE:
      Strip-till in 30 in. rows for planting directly over the tilled row. Usual depth is 7 in. to 9 in. Performs one-pass in-row tillage, residue management, fertilizer placement and seed bed conditioning Optional fertilizer attachments allow Root Zone Banding of Anhydrous Ammonia, Liquid, Dry or any 2 of the 3
      HITCH SYSTEM:
      20 ft. Category 3 Hitch Clevis 30.5 ft. to 40 ft. Category 4 Hitch Clevis 60 ft. Category 5 Hitch Clevis
      FRAME AND WINGS:
      4 in. x 6 in. tubing on 20 ft. to 40 ft. machine 6 in. x 6 in. on 60 ft. machine
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Synchronized master-slave hydraulics on units with hydraulic wing wheels Single Point depth control
      WHEELS AND TIRES:
      20 ft. Tandem 11Lx15 FI (F), 8 bolt hub 30 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings
      WHEELS AND TIRES cont:
      40 ft. Tandem 12.5Lx15 FI (F), 8 bolt on mainframe; Tandem 9.5Lx15 FI (F) 6 bolt on wings 60 ft. 16.5Lx16.1 FI (E) on mainframe 12.5Lx15 FI wing tires 8 rear extension bars
      TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain (pull-type machines)
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type Width Height 16' 6" 13' 6" Double-fold Pull-Type Width Height 40 ft. 18' 6" 13' 6" 60 ft. 18' 9" 13' 9"
      ROW UNIT:
      Optional 24 inch heavy-duty coulters are tapered for self-sharpening to cut residue ahead of the shank Optional HCS™ edge-bent style High Clearance Shank provides 1,250 lbs. of holding force Optional Berm builder 18 in. diameter disks are adjustable and shape the berm Optional berm conditioner rolling baskets pre-settle the berm and reduce clods/valleys in the seed bed Optional Row Cleaners for tougher residue - Order from Factory Supplied
  • NUTRI-PLACER 930 [ Versions ]
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      27.5 ft. to 32.5 ft. Category 3 Hitch Clevis 37.5 ft. to 47.5 ft. Category 4 Hitch Clevis 4 in. x 10 in. pull-frame that attaches to lateral bars
      FRAME AND WINGS:
      4 in. x 6 in. tubing
      WHEELS AND TIRES:
      27.5 to 37.5 ft. Single fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 9.5L - 15 FI 6-bolt 42.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 11L - 15 FI 6-bolt 47.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd tandem gauge wheel 9.5L - 15 FI 6-bolt
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      Single Point Depth Control TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type: Width Height Comments 16 ft. 6 in. 13.6 ft. 135° wing fold
      Double-fold Pull-Type
      Width Height Comments 18 ft. 6 in. 13.6 ft. 117° wing fold
      OPTIONAL REAR HITCH:
      Optional heavy-duty hitch with poly skid plates and manual latch.
      OPTIONAL TRIP SHANKS:
      Rigid Mounts and HD Spring Mounts Includes Shanks, Mounts and required offset brackets CS Mounts Includes Shanks, Mounts 20 in. Coulters and required offset brackets
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives)
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      27.5 ft. to 32.5 ft. Category 3 Hitch Clevis 37.5 ft. to 47.5 ft. Category 4 Hitch Clevis 4 in. x 10 in. pull-frame that attaches to lateral bars
      FRAME AND WINGS:
      4 in. x 6 in. tubing
      WHEELS AND TIRES:
      27.5 to 37.5 ft. Single fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 9.5L - 15 FI 6-bolt 42.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 11L - 15 FI 6-bolt 47.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd tandem gauge wheel 9.5L - 15 FI 6-bolt
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      Single Point Depth Control TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type: Width Height Comments 16 ft. 6 in. 13.6 ft. 135° wing fold
      Double-fold Pull-Type
      Width Height Comments 18 ft. 6 in. 13.6 ft. 117° wing fold
      OPTIONAL REAR HITCH:
      Optional heavy-duty hitch with poly skid plates and manual latch.
      OPTIONAL TRIP SHANKS:
      Rigid Mounts and HD Spring Mounts Includes Shanks, Mounts and required offset brackets CS Mounts Includes Shanks, Mounts 20 in. Coulters and required offset brackets
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives)
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      27.5 ft. to 32.5 ft. Category 3 Hitch Clevis 37.5 ft. to 47.5 ft. Category 4 Hitch Clevis 4 in. x 10 in. pull-frame that attaches to lateral bars
      FRAME AND WINGS:
      4 in. x 6 in. tubing
      WHEELS AND TIRES:
      27.5 to 37.5 ft. Single fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 9.5L - 15 FI 6-bolt 42.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 11L - 15 FI 6-bolt 47.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd tandem gauge wheel 9.5L - 15 FI 6-bolt
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      Single Point Depth Control TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type: Width Height Comments 16 ft. 6 in. 13.6 ft. 135° wing fold
      Double-fold Pull-Type
      Width Height Comments 18 ft. 6 in. 13.6 ft. 117° wing fold
      OPTIONAL REAR HITCH:
      Optional heavy-duty hitch with poly skid plates and manual latch.
      OPTIONAL TRIP SHANKS:
      Rigid Mounts and HD Spring Mounts Includes Shanks, Mounts and required offset brackets CS Mounts Includes Shanks, Mounts 20 in. Coulters and required offset brackets
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives)
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      27.5 ft. to 32.5 ft. Category 3 Hitch Clevis 37.5 ft. to 47.5 ft. Category 4 Hitch Clevis 4 in. x 10 in. pull-frame that attaches to lateral bars
      FRAME AND WINGS:
      4 in. x 6 in. tubing
      WHEELS AND TIRES:
      27.5 to 37.5 ft. Single fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 9.5L - 15 FI 6-bolt 42.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 11L - 15 FI 6-bolt 47.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd tandem gauge wheel 9.5L - 15 FI 6-bolt
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      Single Point Depth Control TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type: Width Height Comments 16 ft. 6 in. 13.6 ft. 135° wing fold
      Double-fold Pull-Type
      Width Height Comments 18 ft. 6 in. 13.6 ft. 117° wing fold
      OPTIONAL REAR HITCH:
      Optional heavy-duty hitch with poly skid plates and manual latch.
      OPTIONAL TRIP SHANKS:
      Rigid Mounts and HD Spring Mounts Includes Shanks, Mounts and required offset brackets CS Mounts Includes Shanks, Mounts 20 in. Coulters and required offset brackets
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives)
    • TYPICAL USE:
      Root Zone Banding of Anhydrous Ammonia, Liquid or Dry fertilizer, or combination of any two Pre-plant or sidedress use
      HITCH SYSTEM:
      27.5 ft. to 32.5 ft. Category 3 Hitch Clevis 37.5 ft. to 47.5 ft. Category 4 Hitch Clevis 4 in. x 10 in. pull-frame that attaches to lateral bars
      FRAME AND WINGS:
      4 in. x 6 in. tubing
      WHEELS AND TIRES:
      27.5 to 37.5 ft. Single fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 9.5L - 15 FI 6-bolt 42.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd single gauge wheel 11L - 15 FI 6-bolt 47.5 ft. Double Fold - 12L x 15 FI 8-bolt w/hyd tandem gauge wheel 9.5L - 15 FI 6-bolt
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor
      Single Point Depth Control TRANSPORT:
      Combination warning and tail lights with 7-pin connection SMV emblem and reflectors
      TRANSPORT DIMENSIONS:
      Single-fold Pull-Type: Width Height Comments 16 ft. 6 in. 13.6 ft. 135° wing fold
      Double-fold Pull-Type
      Width Height Comments 18 ft. 6 in. 13.6 ft. 117° wing fold
      OPTIONAL REAR HITCH:
      Optional heavy-duty hitch with poly skid plates and manual latch.
      OPTIONAL TRIP SHANKS:
      Rigid Mounts and HD Spring Mounts Includes Shanks, Mounts and required offset brackets CS Mounts Includes Shanks, Mounts 20 in. Coulters and required offset brackets
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives)
  • NUTRI-PLACER 920 [ Versions ]
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops on 30 inch spacing Pre-plant application with minimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Single Cat4 clevis Double 4 in. x 8 in. tube pull frame Swinging hose stand to keep hydraulic hoses out of the way Heavy Duty jack – 10,000 lb. capacity
      FRAME AND WINGS:
      4 in. x 6 in. double rank tubing with fore-aft bracing for the first 19 coulters Single 4 in. x 6 in. tube out to 23 coulters Small bolt-on wings to extend from 23 rows to 25 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Wings are hydraulic x-fold for narrower transport Wings follow ground contours from 7 degrees down to unlimited up Five section wing flex Outer wing folds over for conversion to 17 coulter applicator Wing kick up for extra clearance on end rows 25 in. from frame to bottom of coulter
      TANK:
      Choice of 1650 or 2050 gallon tank
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Active hydraulic down-pressure to keep coulters in the ground minimum pressure of 2200 psi
      WHEELS AND TIRES:
      1650 gallon tank 420/80 R46 LI 159 tires with 10-bolt hub. 11.25” Bolt circle – Standard 120” wheel spacing
      380/90 R46 LI 159 tires with 10 bolt
      hub. 11.25” bolt circle - Optional 120” wheel spacing
      2050 gallon tank - Dual
      Dual 380/90 R46 LI 149 tires with 10- bolt hub -Standard 13.1875” bolt circle Duals spaced on 120” & 180” centers
      2050 gallon tank - Single
      Single 420/80R46 LI170 tires with 10-bolt hub - Standard 13.1875” bolt circle 120” wheel spacing
      all sizes have four 20.5-8 x 10
      pin-adjust gauge wheels
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility and stability Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      Black hose is standard For use with clear-liquid fertilizers only Includes convenient 3” rear fill valves and all hoses / fittings. Choose between high pressure injectors (orifice not included) or liquid knives. Fittings for row units are stainless steel 8 gallon wash tank Optional Mount for 5 section Raven manifold in front of tank Optional hydraulic driven pump HYPRO 2” Inlet – 1-1/2” Outlet 212 GPM @ 17GPM HYD oil flow and 40 PSI 133 GPM @ 17GPM HYD oil flow and 110 PSI
      TRANSPORT DIMENSIONS:
      Width Height
      16 ft. 8 in. 13 ft. 4 in.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives) come standard with base Nozzles and orifices are not included
      MACHINE WEIGHT
      Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels
      1650 gallon empty weight
      Whole machine: 14,830 lbs Tongue: 6,300 lbs
      2050 gallon empty weight
      Whole Machine: 16,930 lbs Tongue: 6,300 lbs
      Recommended tractor is a 200HP
      Magnum or larger
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops on 30 inch spacing Pre-plant application with minimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Single Cat4 clevis Double 4 in. x 8 in. tube pull frame Swinging hose stand to keep hydraulic hoses out of the way Heavy Duty jack – 10,000 lb. capacity
      FRAME AND WINGS:
      4 in. x 6 in. double rank tubing with fore-aft bracing for the first 19 coulters Single 4 in. x 6 in. tube out to 23 coulters Small bolt-on wings to extend from 23 rows to 25 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Wings are hydraulic x-fold for narrower transport Wings follow ground contours from 7 degrees down to unlimited up Five section wing flex Outer wing folds over for conversion to 17 coulter applicator Wing kick up for extra clearance on end rows 25 in. from frame to bottom of coulter
      TANK:
      Choice of 1650 or 2050 gallon tank
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Active hydraulic down-pressure to keep coulters in the ground minimum pressure of 2200 psi
      WHEELS AND TIRES:
      1650 gallon tank 420/80 R46 LI 159 tires with 10-bolt hub. 11.25” Bolt circle – Standard 120” wheel spacing
      380/90 R46 LI 159 tires with 10 bolt
      hub. 11.25” bolt circle - Optional 120” wheel spacing
      2050 gallon tank - Dual
      Dual 380/90 R46 LI 149 tires with 10- bolt hub -Standard 13.1875” bolt circle Duals spaced on 120” & 180” centers
      2050 gallon tank - Single
      Single 420/80R46 LI170 tires with 10-bolt hub - Standard 13.1875” bolt circle 120” wheel spacing
      all sizes have four 20.5-8 x 10
      pin-adjust gauge wheels
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility and stability Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      Black hose is standard For use with clear-liquid fertilizers only Includes convenient 3” rear fill valves and all hoses / fittings. Choose between high pressure injectors (orifice not included) or liquid knives. Fittings for row units are stainless steel 8 gallon wash tank Optional Mount for 5 section Raven manifold in front of tank Optional hydraulic driven pump HYPRO 2” Inlet – 1-1/2” Outlet 212 GPM @ 17GPM HYD oil flow and 40 PSI 133 GPM @ 17GPM HYD oil flow and 110 PSI
      TRANSPORT DIMENSIONS:
      Width Height
      16 ft. 8 in. 13 ft. 4 in.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives) come standard with base Nozzles and orifices are not included
      MACHINE WEIGHT
      Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels
      1650 gallon empty weight
      Whole machine: 14,830 lbs Tongue: 6,300 lbs
      2050 gallon empty weight
      Whole Machine: 16,930 lbs Tongue: 6,300 lbs
      Recommended tractor is a 200HP
      Magnum or larger
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops on 30 inch spacing Pre-plant application with minimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Single Cat4 clevis Double 4 in. x 8 in. tube pull frame Swinging hose stand to keep hydraulic hoses out of the way Heavy Duty jack – 10,000 lb. capacity
      FRAME AND WINGS:
      4 in. x 6 in. double rank tubing with fore-aft bracing for the first 19 coulters Single 4 in. x 6 in. tube out to 23 coulters Small bolt-on wings to extend from 23 rows to 25 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Wings are hydraulic x-fold for narrower transport Wings follow ground contours from 7 degrees down to unlimited up Five section wing flex Outer wing folds over for conversion to 17 coulter applicator Wing kick up for extra clearance on end rows 25 in. from frame to bottom of coulter
      TANK:
      Choice of 1650 or 2050 gallon tank
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor Active hydraulic down-pressure to keep coulters in the ground minimum pressure of 2200 psi
      WHEELS AND TIRES:
      1650 gallon tank 420/80 R46 LI 159 tires with 10-bolt hub. 11.25” Bolt circle – Standard 120” wheel spacing
      380/90 R46 LI 159 tires with 10 bolt
      hub. 11.25” bolt circle - Optional 120” wheel spacing
      2050 gallon tank - Dual
      Dual 380/90 R46 LI 149 tires with 10- bolt hub -Standard 13.1875” bolt circle Duals spaced on 120” & 180” centers
      2050 gallon tank - Single
      Single 420/80R46 LI170 tires with 10-bolt hub - Standard 13.1875” bolt circle 120” wheel spacing
      all sizes have four 20.5-8 x 10
      pin-adjust gauge wheels
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility and stability Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      Black hose is standard For use with clear-liquid fertilizers only Includes convenient 3” rear fill valves and all hoses / fittings. Choose between high pressure injectors (orifice not included) or liquid knives. Fittings for row units are stainless steel 8 gallon wash tank Optional Mount for 5 section Raven manifold in front of tank Optional hydraulic driven pump HYPRO 2” Inlet – 1-1/2” Outlet 212 GPM @ 17GPM HYD oil flow and 40 PSI 133 GPM @ 17GPM HYD oil flow and 110 PSI
      TRANSPORT DIMENSIONS:
      Width Height
      16 ft. 8 in. 13 ft. 4 in.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives) come standard with base Nozzles and orifices are not included
      MACHINE WEIGHT
      Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels
      1650 gallon empty weight
      Whole machine: 14,830 lbs Tongue: 6,300 lbs
      2050 gallon empty weight
      Whole Machine: 16,930 lbs Tongue: 6,300 lbs
      Recommended tractor is a 200HP
      Magnum or larger
  • Nutri-Placer 2800 [ Versions ]
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops, with 30 in., 36 in., 38 in., or 40 in. row spacing Pre-plant application with mimimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Combination single/double clevis 850/1,000 gallon version has 4 in. x 4 in. pull frame 1,300 gallon version has 4 in. x 8 in. pull frame Swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      850/1,000 gallon version has 4 in. x 4 in. tubing, double rank for the first 7 coulters 1,300 gallon version has 4 in. x 6 in. tubing and double rank with diagonal bracing for the first 11 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels. Wings are hydraulic fold for narrower transport 1,300 gallon version wings follow ground contours from 6 degrees down to 30 degrees up; Outer wing folds backwards for transport 25 in. of crop clearance to frame
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor 1,300 gallon version has patented 1000 psi active hydraulic down-pressure to keep coulters in the ground
      WHEELS AND TIRES:
      Tires and hubs are fully rated for loads 850 gallon version has 14L - 16.1 12PR tires with 8-bolt hub; choose from adjustable wheel spacing from 62 in. to 80 in., or fixed 120 in. spacing 1,000 gallon version has 320/85 R38 tires with 8-bolt hub on fixed 120 in. spacing 1,300 gallon version has 420/80 R46 tires with 10-bolt hub and 20.5 x 8 pin-adjust gauge wheels; adjustable wheel spacing of 120 in., 144 in. and 156 in.
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      For use with clear-liquid fertilizers only Includes convenient rear fill valves and all hoses / fittings. Choose between high pressure injectors (nozzle not included) or liquid knives (orifice not included). Check valves and fittings for row units are stainless steel Optional Ground Drive with Dyna-trak tire, stainless-steel drive chain, and optional ground driven pump
      TRANSPORT DIMENSIONS:
      850/1,000 gallon version: Width Height 12 ft. 4 in. 9 ft. 8 in.
      1,300 gallon version:
      Width Height 12 ft. 6 in. 13 ft.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops, with 30 in., 36 in., 38 in., or 40 in. row spacing Pre-plant application with mimimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Combination single/double clevis 850/1,000 gallon version has 4 in. x 4 in. pull frame 1,300 gallon version has 4 in. x 8 in. pull frame Swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      850/1,000 gallon version has 4 in. x 4 in. tubing, double rank for the first 7 coulters 1,300 gallon version has 4 in. x 6 in. tubing and double rank with diagonal bracing for the first 11 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels. Wings are hydraulic fold for narrower transport 1,300 gallon version wings follow ground contours from 6 degrees down to 30 degrees up; Outer wing folds backwards for transport 25 in. of crop clearance to frame
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor 1,300 gallon version has patented 1000 psi active hydraulic down-pressure to keep coulters in the ground
      WHEELS AND TIRES:
      Tires and hubs are fully rated for loads 850 gallon version has 14L - 16.1 12PR tires with 8-bolt hub; choose from adjustable wheel spacing from 62 in. to 80 in., or fixed 120 in. spacing 1,000 gallon version has 320/85 R38 tires with 8-bolt hub on fixed 120 in. spacing 1,300 gallon version has 420/80 R46 tires with 10-bolt hub and 20.5 x 8 pin-adjust gauge wheels; adjustable wheel spacing of 120 in., 144 in. and 156 in.
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      For use with clear-liquid fertilizers only Includes convenient rear fill valves and all hoses / fittings. Choose between high pressure injectors (nozzle not included) or liquid knives (orifice not included). Check valves and fittings for row units are stainless steel Optional Ground Drive with Dyna-trak tire, stainless-steel drive chain, and optional ground driven pump
      TRANSPORT DIMENSIONS:
      850/1,000 gallon version: Width Height 12 ft. 4 in. 9 ft. 8 in.
      1,300 gallon version:
      Width Height 12 ft. 6 in. 13 ft.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops, with 30 in., 36 in., 38 in., or 40 in. row spacing Pre-plant application with mimimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Combination single/double clevis 850/1,000 gallon version has 4 in. x 4 in. pull frame 1,300 gallon version has 4 in. x 8 in. pull frame Swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      850/1,000 gallon version has 4 in. x 4 in. tubing, double rank for the first 7 coulters 1,300 gallon version has 4 in. x 6 in. tubing and double rank with diagonal bracing for the first 11 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels. Wings are hydraulic fold for narrower transport 1,300 gallon version wings follow ground contours from 6 degrees down to 30 degrees up; Outer wing folds backwards for transport 25 in. of crop clearance to frame
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor 1,300 gallon version has patented 1000 psi active hydraulic down-pressure to keep coulters in the ground
      WHEELS AND TIRES:
      Tires and hubs are fully rated for loads 850 gallon version has 14L - 16.1 12PR tires with 8-bolt hub; choose from adjustable wheel spacing from 62 in. to 80 in., or fixed 120 in. spacing 1,000 gallon version has 320/85 R38 tires with 8-bolt hub on fixed 120 in. spacing 1,300 gallon version has 420/80 R46 tires with 10-bolt hub and 20.5 x 8 pin-adjust gauge wheels; adjustable wheel spacing of 120 in., 144 in. and 156 in.
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      For use with clear-liquid fertilizers only Includes convenient rear fill valves and all hoses / fittings. Choose between high pressure injectors (nozzle not included) or liquid knives (orifice not included). Check valves and fittings for row units are stainless steel Optional Ground Drive with Dyna-trak tire, stainless-steel drive chain, and optional ground driven pump
      TRANSPORT DIMENSIONS:
      850/1,000 gallon version: Width Height 12 ft. 4 in. 9 ft. 8 in.
      1,300 gallon version:
      Width Height 12 ft. 6 in. 13 ft.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops, with 30 in., 36 in., 38 in., or 40 in. row spacing Pre-plant application with mimimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Combination single/double clevis 850/1,000 gallon version has 4 in. x 4 in. pull frame 1,300 gallon version has 4 in. x 8 in. pull frame Swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      850/1,000 gallon version has 4 in. x 4 in. tubing, double rank for the first 7 coulters 1,300 gallon version has 4 in. x 6 in. tubing and double rank with diagonal bracing for the first 11 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels. Wings are hydraulic fold for narrower transport 1,300 gallon version wings follow ground contours from 6 degrees down to 30 degrees up; Outer wing folds backwards for transport 25 in. of crop clearance to frame
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor 1,300 gallon version has patented 1000 psi active hydraulic down-pressure to keep coulters in the ground
      WHEELS AND TIRES:
      Tires and hubs are fully rated for loads 850 gallon version has 14L - 16.1 12PR tires with 8-bolt hub; choose from adjustable wheel spacing from 62 in. to 80 in., or fixed 120 in. spacing 1,000 gallon version has 320/85 R38 tires with 8-bolt hub on fixed 120 in. spacing 1,300 gallon version has 420/80 R46 tires with 10-bolt hub and 20.5 x 8 pin-adjust gauge wheels; adjustable wheel spacing of 120 in., 144 in. and 156 in.
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      For use with clear-liquid fertilizers only Includes convenient rear fill valves and all hoses / fittings. Choose between high pressure injectors (nozzle not included) or liquid knives (orifice not included). Check valves and fittings for row units are stainless steel Optional Ground Drive with Dyna-trak tire, stainless-steel drive chain, and optional ground driven pump
      TRANSPORT DIMENSIONS:
      850/1,000 gallon version: Width Height 12 ft. 4 in. 9 ft. 8 in.
      1,300 gallon version:
      Width Height 12 ft. 6 in. 13 ft.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES
    • TYPICAL USE:
      Inject fertilizer beneath the surface into the root zone to avoid residue tie-up and maximize effectiveness Sidedress clear liquid fertilizer after planting row crops, with 30 in., 36 in., 38 in., or 40 in. row spacing Pre-plant application with mimimal ground disturbance Inject into standing small grain crops
      HITCH SYSTEM:
      Combination single/double clevis 850/1,000 gallon version has 4 in. x 4 in. pull frame 1,300 gallon version has 4 in. x 8 in. pull frame Swinging hose stand to keep hydraulic hoses out of the way
      FRAME AND WINGS:
      850/1,000 gallon version has 4 in. x 4 in. tubing, double rank for the first 7 coulters 1,300 gallon version has 4 in. x 6 in. tubing and double rank with diagonal bracing for the first 11 coulters All versions have parallel linkage for level lift front-to-back; tank remains stationary. Constant and consistent tongue weight whether the tank is empty or full because tanks are centered directly over the wheels. Wings are hydraulic fold for narrower transport 1,300 gallon version wings follow ground contours from 6 degrees down to 30 degrees up; Outer wing folds backwards for transport 25 in. of crop clearance to frame
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses and fittings Male ISO couplers on hydraulic hoses to tractor 1,300 gallon version has patented 1000 psi active hydraulic down-pressure to keep coulters in the ground
      WHEELS AND TIRES:
      Tires and hubs are fully rated for loads 850 gallon version has 14L - 16.1 12PR tires with 8-bolt hub; choose from adjustable wheel spacing from 62 in. to 80 in., or fixed 120 in. spacing 1,000 gallon version has 320/85 R38 tires with 8-bolt hub on fixed 120 in. spacing 1,300 gallon version has 420/80 R46 tires with 10-bolt hub and 20.5 x 8 pin-adjust gauge wheels; adjustable wheel spacing of 120 in., 144 in. and 156 in.
      TRANSPORT:
      Manual cylinder stops Tanks mounted lengthwise for better rearward visibility Combination warning and tail lights with 7-pin connection SMV emblem and reflectors ASAE highway transport chain
      LIQUID PLUMBING:
      For use with clear-liquid fertilizers only Includes convenient rear fill valves and all hoses / fittings. Choose between high pressure injectors (nozzle not included) or liquid knives (orifice not included). Check valves and fittings for row units are stainless steel Optional Ground Drive with Dyna-trak tire, stainless-steel drive chain, and optional ground driven pump
      TRANSPORT DIMENSIONS:
      850/1,000 gallon version: Width Height 12 ft. 4 in. 9 ft. 8 in.
      1,300 gallon version:
      Width Height 12 ft. 6 in. 13 ft.
      Requirements for Operation:
      ROW UNITS (coulters, injectors or knives), ORDER FROM FACTORY SUPPLIED ACCESSORIES