• Summary

Your Summary

FLEX HOE AIR DRILLS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • Flex Hoe 400 Air Hoe Drill [ Versions ]
    • WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
    • WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
    • WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
    • WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
    • WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
    • WORKING WIDTH w/10 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 33 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 51 ft. 57 ft. 58 ft.
      WORKING WIDTH w/7.2 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 27 ft. 33 ft. 33 ft. 39 ft. 39 ft. 45 ft. 45 ft. 51 ft. 51 ft. 57 ft. 57 ft.
      WORKING WIDTH w/12 in. SPACING:
      Implement Working Width Width ------ ------ 27 ft. 28 ft. 33 ft. 34 ft. 39 ft. 40 ft. 45 ft. 46 ft. 51 ft. 52 ft. 57 ft. 58 ft.
      HITCH:
      Floating hitch
      HYDRAULICS:
      Depth control - Rockshaft rotated by 2 raise/lower cylinders located on the outboard end of the center section Wing lift - 2 cylinders on 3 section implements, 4 cylinders on 5 section implements
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated by contact onto center section rockshaft
      FRAME:
      Vertical folding for transport 4 in. x 4 in. HSS tubing, air hoe drill frame is supported across the rear by the presswheels and across the front by the single or dual walkbeam front castors. Barrel shaped wing hinge bolts and polyurethane flex tubes and pads allow the frame to flex torsionally across the entire width of machine.
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 1 red stop light
      TRANSPORT WIDTH:
      27 ft. to 57 ft. - 20 ft. 6 in. Width will vary based on opener selection
      TRANSPORT HEIGHT:
      27 ft. - 11 ft. 8 in. 33 ft. - 14 ft. 8 in. 39 ft. - 17 ft. 9 in. 45 ft. - 14 ft. 6 in. 51 ft. - 17 ft. 6-1/2 in. 57 ft. - 17 ft. 6-1/2 in.
      TRANSPORT LENGTH:
      27 ft. to 39 ft. models - 27 ft. 3 in. 45 ft. to 57 ft. models - 31 ft. 11 in.
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      Tractor power The mentioned recommendations below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields. The total towed weight should be less than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      The total towed weight should be
      reduced based on tractor condition and road conditions. Requirements for Operation: (continued) Tractor draw bar that can be locked in a stationary position with an intermediate draw bar chain support. Tractor equipped with 12-volt electrical system with a 7 pin auxiliary electric outlet for warning lights.
      * Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      ** Set up facilities are available for an
      additional charge on the invoice. Pleasesee the Set up facilities chart for more information.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • Flex Hoe 700 Air Hoe Drill [ Versions ]
    • IMPLEMENT WIDTH AND SHANK SPACING:
      60 ft. - 12 inch spacing 70 ft. - 12 inch spacing
      HITCH:
      Rigid trussed hitch attached to mainframe
      HYDRAULICS:
      Boom fold - 2 cylinders sequenced for fold/unfold procedure Depth control - Rockshaft rotated by 4 multi-function cylinders located on each wing frame section Transport raise - These are the same cylinders as the depth control cylinders
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated through cable connection to rockshaft
      FRAME:
      Patented rearward folding for transport Main frame - 5 sections of 12 in. x 12 in. HSS 60 ft. unit - 10 ft. center, 15 ft. inner, 10 ft. outer 70 ft. unit - 10 ft. center, 15 ft. inner, 15 ft. outer Wing frames - 4 in. x 4 in. HSS 4 rank - Patented tandem paired-rank design
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber Walkbeam pneumatic packing
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 2 red signal/tail light assemblies
      TRANSPORT WIDTH:
      212 in. for both 60 and 70 ft. models
      TRANSPORT HEIGHT:
      162 in. for both 60 and 70 ft. models
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      The mentioned recommendations
      below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields.
      Requirements for Operation: (continued)
      * Minimum requirements are a starting point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments
    • IMPLEMENT WIDTH AND SHANK SPACING:
      60 ft. - 12 inch spacing 70 ft. - 12 inch spacing
      HITCH:
      Rigid trussed hitch attached to mainframe
      HYDRAULICS:
      Boom fold - 2 cylinders sequenced for fold/unfold procedure Depth control - Rockshaft rotated by 4 multi-function cylinders located on each wing frame section Transport raise - These are the same cylinders as the depth control cylinders
      DEPTH CONTROL:
      Single point mechanical adjustment with hydraulic shutoff poppet valve actuated through cable connection to rockshaft
      FRAME:
      Patented rearward folding for transport Main frame - 5 sections of 12 in. x 12 in. HSS 60 ft. unit - 10 ft. center, 15 ft. inner, 10 ft. outer 70 ft. unit - 10 ft. center, 15 ft. inner, 15 ft. outer Wing frames - 4 in. x 4 in. HSS 4 rank - Patented tandem paired-rank design
      PACKING SYSTEM:
      Select to match opener selection, seed row spacing, soil type and moisture conditions In-line "V" steel or semi-pneumatic rubber Walkbeam pneumatic packing
      TRANSPORT LIGHTS:
      Front - 2 amber dual-lens markers Rear - 2 red signal/tail light assemblies
      TRANSPORT WIDTH:
      212 in. for both 60 and 70 ft. models
      TRANSPORT HEIGHT:
      162 in. for both 60 and 70 ft. models
      TIRES:
      All tires are stubble rated
      Requirements for Operation:
      Tractor power Opener selection, ground speed, seeding depth, soil texture, moisture conditions, field topography and hitched configurations are all factors affecting required horsepower.
      The mentioned recommendations
      below are strictly a guideline. Drawbar horsepower: Single-shoot in average soil conditions 4 to 7 HP per foot Double-shoot in heavy soil conditions 7.5 HP per foot Hydraulic System Closed Center Load Sensing (CCLS) with 35 U.S. gpm minimum flow at 2600 p.s.i. at the tractor SCV couplers
      Do not tow the implement at speeds
      over 20 mph. Do not tow a loaded air system while transporting the implement between fields. Do not tow more than two implements behind the tractor while transporting between fields.
      Requirements for Operation: (continued)
      * Minimum requirements are a starting point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
      EX WORKS:
      Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments
  • Precision Hoe 800 Air Drill [ Versions ]
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.
    • IMPLEMENT WIDTH AND SHANK SPACING:
      50, 60, or 70 ft. implement width, 10 inch spacing
      HITCH:
      Floating hitch, with pintle type, Perfect™ hitch, CAT IV. Fits up to a 2 inch draw pin.
      HYDRAULICS AND FRAME:
      Wing fold - Two (2) cylinders sequenced to fold / unfold Transport Raise - Four (4) cylinders raise/lower the frames to transport/field position. Row unit/Opener Position - Individual Nitro Rod hydraulic cylinder on each to raise/lower during field operation. Trip Force - The same individual row unit/opener cylinders provide adjustable trip force in a range from 275 to 550 lbs. In-cab electronic trip force adjustment is Standard. Requires AFS Pro 700 or AFS Pro 600. Frame Weight Transfer - Transport raise cylinders provide adjustable weight transfer on center and wing sections. In-cab electronic frame weight transfer adjustment is Standard. Requires AFS Pro 700 or AFS 600.
      FOLD CONTROL:
      Standard, Electronic/In-Cab fold control System requires AFS Pro 700 or AFS 600.
      ROW UNIT/OPENER:
      Patented true parallel-link row unit with hydraulic trip force and down pressure adjustment. Nitro rod cylinder on each row unit. Trip force range of 275 to 550 lbs. Packing force of 135 to 215 lbs. Patented easy set individual row unit/opener depth control, using adjustment bolt providing seeding depth of 1/8 inch to 2 inches, in 1/8 inch increments. Four (4) inch smooth profile on-row pneumatic press wheel. (4.8 X 8 smooth tire)
      FRAME:
      Patented rearward folding for transport.
      MAINFRAME
      50 ft. - 3 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 20 ft. wings 60 ft. - 5 section, 12 in. X 12 in. HSS 1- 10 ft. center section 2 - 15 ft. inner wings 2 - 10 ft. outer wings 70 ft. - 5 section, 12 in. X 12 in. HSS 1 - 10 ft. center section 2 - 15 ft. inner wing 2 - 15 ft. outer wings
      SUB-FRAME MODULES -
      4 in. X 4 in. HSS
      TRANSPORT WIDTH:
      50, 60, and 70 ft models: 18 ft. 4 in.
      TRANSPORT HEIGHT:
      50, 60, and 70 ft. models: 16 ft. 6 in.
      TIRES:
      ALL TIRES LISTED BELOW ARE STUBBLE RATED
      50 ft. Model
      Standard Four (4) sets of Dual 11L - 15 FI carrying front tool bars with five (5) 11L - 15 FI rear frame carrier wheels. High Flotation option Four (4) sets of Dual 12.5L - 15 FI carrying front tool bar with five (5) 12.5 L - 15 FI rear frame carrier wheels.
      60 and 70 ft. Models
      Standard Dual 11L - 15 FI tires on center section and inner wing sections, with single 11L - 15 FI tire on outer wing. Five (5) 11L - 15 FI rear frame carrier wheels. Dual Tire Option Six (6) sets of Dual 11L - 15 FI carrying front tool bar. Five (5) 11L - 15 FI rear frame carrier wheels. High Floatation option Six (6) sets of Dual 12.5L - 15 FI carrying front tool bar. Five (5) 12.5L - 15 FI rear frame carrier wheels.
      MISCELLANEOUS:
      Storage hitch jack, rated at 3000 lbs. Highway transport safety chain and attaching hardware, 60,600 lbs. capacity SMV (slow moving vehicle) sign and attaching hardware Transport lighting package including: Front - two (2) amber dual-lens markers Rear - two (2) red, single tail light assemblies
      * AFS Pro 700 or AFS 600
      Monitor/Control system to operate the STANDARD electro-hydraulic fold/unfold, row unit trip force, and weight transfer system.
      * Electrical, hydraulic, and lighting
      harness for air cart - Select in Factory Supplied Accessories.
      * Air Packages, single or double shoot
      for Tow-Between or Tow-Behind air cart - Select in Factory Supplied Accessories.
      Requirements for Operation:
      (continued) * Tractor power Opener, ground speed, seeding depth, soil texture, soil moisture, field topography and hitched configurations are all factors affecting required horsepower.
      * Tractor power
      The recommendations below are strictly guidelines.
      Drawbar HP: - 6.0 to 7.5 HP per foot
      Hydraulic System - Closed Center
      Load Sensing (CCLS) with 35 U.S. gpm minimum flow of 2600 p.s.i. at the tractor SCV couplers
      Do not tow a loaded air system while
      transporting implement between fields.
      Do not tow the implement at speeds
      over 20 mph.
      Do not tow more than two
      implements behind the tractor while transporting between fields.
      The total towed weight should be less
      than 1.5 times the maximum operating weight provided by the tractor manufacturer.
      Requirements for Operation:
      (continued) The total towed weight should be reduced based on tractor condition and road conditions.
      Tractor drawbar that can be locked
      in a stationary position with an intermediate draw bar chain support.
      Tractor equipped with 12-volt
      electrical system with a 7 pin auxiliary electric outlet for warning lights.
      **Minimum requirements are a starting
      point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill.