• Summary

Your Summary

GRAIN AND FLEX HEADS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • 2010 Rigid Header for Axial-Flow 7010 and 8010 [ Versions ]
    • STANDARD FEATURES:
      Single lever, quick attach header Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Spiral pattern retractable fingers full length of auger with breakaway retaining pin to keep broken fingers inside auger tube Stainless steel front floor Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline dual speed auger drive sprocket provides 139 RPM or 159 RPM auger speed Drivelines header lateral tilt ready
      WEIGHTS:
      2010 - 20 ft. ww - 3,100 lbs 2010 - 25 ft. ww - 4,040 lbs 2010 - 30 ft. ww - 4,756 lbs
      STANDARD FEATURES: (continued)
      Hydraulic reel drive with chain reduction Hydraulic reel lift and fore/aft control Knife with fine serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Dual oil bath knife drive gearcases (single knife drive on 20 and 25 ft. headers) 575 CPM (cycles per minute) knife speed Additional knife storage location in lower beam. Heavy-duty bottom shields Hinged knife and auger drive end shields Peripheral header lighting with reflective material Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Spiral pattern retractable fingers full length of auger with breakaway retaining pin to keep broken fingers inside auger tube Stainless steel front floor Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline dual speed auger drive sprocket provides 139 RPM or 159 RPM auger speed Drivelines header lateral tilt ready
      WEIGHTS:
      2010 - 20 ft. ww - 3,100 lbs 2010 - 25 ft. ww - 4,040 lbs 2010 - 30 ft. ww - 4,756 lbs
      STANDARD FEATURES: (continued)
      Hydraulic reel drive with chain reduction Hydraulic reel lift and fore/aft control Knife with fine serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Dual oil bath knife drive gearcases (single knife drive on 20 and 25 ft. headers) 575 CPM (cycles per minute) knife speed Additional knife storage location in lower beam. Heavy-duty bottom shields Hinged knife and auger drive end shields Peripheral header lighting with reflective material Case IH Standard Warranty Applies
    • STANDARD FEATURES:
      Single lever, quick attach header Single point/single lever header hydraulic coupler Single point electrical wiring coupler Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Spiral pattern retractable fingers full length of auger with breakaway retaining pin to keep broken fingers inside auger tube Stainless steel front floor Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline dual speed auger drive sprocket provides 139 RPM or 159 RPM auger speed Drivelines header lateral tilt ready
      WEIGHTS:
      2010 - 20 ft. ww - 3,100 lbs 2010 - 25 ft. ww - 4,040 lbs 2010 - 30 ft. ww - 4,756 lbs
      STANDARD FEATURES: (continued)
      Hydraulic reel drive with chain reduction Hydraulic reel lift and fore/aft control Knife with fine serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Dual oil bath knife drive gearcases (single knife drive on 20 and 25 ft. headers) 575 CPM (cycles per minute) knife speed Additional knife storage location in lower beam. Heavy-duty bottom shields Hinged knife and auger drive end shields Peripheral header lighting with reflective material Case IH Standard Warranty Applies
  • 3020 FLEX HEAD [ Versions ]
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.
    • BASE HEADER:
      Single lever, quick attach header Single point/single lever hydraulic coupler Single point electrical wiring coupler Stainless steel front floor
      AUGER:
      Cross auger 26 in. (660 mm) dia., with high strength center section, 5 in. (127 mm) deep flighting Retractable auger fingers, full length of auger with breakaway design Auger fingers use click pins for quick easy replacement
      DRIVES:
      Telescoping drive lines with 60° of free rotation and integral torque limiter on auger driveline Single speed drive sprocket provides 147 rpm auger speed Header drivelines are lateral tilt ready
      REEL:
      Hydraulic reel drive with chain reduction Hydraulic reel lift with extended lift hydraulic cylinders Hydraulic reel fore/aft control Fore/Aft reel position sensors
      NOTE: Be aware that aftermarket reels
      both conventional and air driven may require modification for proper operation on this header.
      CUTTERBAR:
      Knife with coarse serrated bolt on sections Heavy-duty knife guards with adjustable hold downs Single Oil bath knife drive gearcase 575 CPM (cycles per minute)
      AUTOMATIC HEADER HEIGHT:
      Automatic Header Height Control and Lateral Tilt wiring sensors
      MISCELLANEOUS:
      Peripheral header lighting with reflective material Additional knife storage location in lower beam Full width Skid Plates with UHMW polyethylene skid shoes Hinged knife and auger drive end shields Case IH Standard Warranty Applies Mid crop dividers standard
      WEIGHTS:
      3020 - 20 ft. - Single - 4,242 lbs. 3020 - 25 ft. - Single - 5,302 lbs. 3020 - 30 ft. - Single - 6,362 lbs. 3020 - 30 ft. - Double - 6,562 lbs. 3020 - 35 ft. - Single - 6,760 lbs. 3020 - 35 ft. - Double - 6,960 lbs.