Precision Air 3380 Air System 380 US bushels (13390 liters) 3 Plastic Tanks Tow-Between Front Tank - 169 US bu. (5955 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 118 US bu. (4158 liters) Tow-Behind Front Tank - 118 US bu. (4158 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 169 US bu. (5955 liters)
Precision Air 3430 Air System
430 US bushels (15153 liters) 3 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 186 US bu. (6554 liters)
Hydraulic driven dual fan
WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width
Quick change double shoot valves Maximum of 8 primary 2.5 in. (6.4cm) lines per meter roller
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base
Variable - hydraulically driven mechanism with control from cab
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout
Precision Air 3380 Air System Ground Clearance: 25 in. (0.64 m) Height: 14 ft. 11 in. (4.55 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 10,880 lbs. (4940 kg) Weight Tow-Between (Loaded*): 33,580 lbs. (15230 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 10,880 lbs. (4940 kg) Weight Tow-Behind (Loaded*): 33,580 lbs. (15230 kg) Weight Tow-Between Front Hitch (Loaded): 7420 lbs. (3370 kg)
Precision Air 3430 Air System Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 11,090 lbs. (5030 kg) Weight Tow-Between (Loaded*): 36,780 lbs. (16680 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 11,090 lbs. (5030 kg) Weight Tow-Behind (Loaded*): 36,780 lbs. (16680 kg) Weight Tow-Between Front Hitch (Loaded): 8,020 lbs. (3640 kg)
* When loaded with 48 lb./ft.³ of
AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM
Transport lighting meets ASAE 279.11
Turning radius can be reduced when
a Tow-Between Cart is used with a 3 point hitch equipped QUADTRAC. A drawbar extension may be required.
Requirements for Operation:
TRACTOR MONITOR INSTALLATION KIT IS REQUIRED FOR OPERATION (include brackets and harness). See Parts Division for ordering information.
Do not tow the implement at speeds
over 20 mph (32 kmph)
Do not tow a loaded air system while
transporting the implement between fields.
Do not tow more than two implements
behind the tractor while transporting between fields.
The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.
The total towed weight should be
reduced based on tractor condition and road conditions.
When operating a Tow-Between
Air System with a Steiger QUADTRAC use high capacity Drawbar in the extended length position.
Category IV tractor drawbar that can
be locked in a stationary position with an intermediate drawbar chain support.
Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights
Closed center or load sensing
hydraulic system for tractor required
Requirements for Operation: (cont.)
One hydraulic control valve for fan and auger
Maximum Case Drain Pressure must
be less than 25 psi (172 kPa)
1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)
Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)
Variable drive carts require a 12 volt,
550 cold cranking amp battery that is not supplied. The recommended battery is 12V lead acid, deep cycle, BCI group size 24, minimum 120 minutes RC (reserve capacity).
20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow
Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives Requirements for Operation: (cont.) Typical hydraulic pressure requirement is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*
* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)