• Summary

Your Summary

PRIMARY TILLAGE: DISK RIPPERS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • 690 RIPPER 12.5 FT [ Versions ]
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
  • 690 RIPPER 17.5 FT [ Versions ]
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
    • HITCH:
      Pull-type hitch with 6 x 10 in. (15 x 20 cm) tubing Mechanical self-leveling hitch Parking jack stand Swinging hose stand
      FRAME:
      6 x 8 in. (15 x 20 cm) fore/aft 6 x 6 in. (15 x 15 cm) lateral
      SHANKS:
      Shear Bolt shank mounts (recommended for no rocks or obstruction) SR12 Spring Reset shank mounts (recommended for occasional rock or obstructions) 1-1/4 in. (3.2 cm) x 3 in. (7.6 cm) parabolic shanks 35 in. (89 cm) underframe clearance SR13 Spring Reset shank mounts (recommended for frequent rock or obstructions) 1-1/4 in. (3.2 cm) x 4 in. (10 cm) parabolic shanks 38 in. (96.5 cm) underframe clearance
      UNITIZED GANGS (pre-assembled):
      5 x 3 in. rectangular tube gang bars with bolted on 1-1/4 x 2-1/2 in. spring cushioned bearing standards
      Earth Metal Crimped Center
      Disk Blades Diameter: 24 in. (610 mm) Thickness: 0.256 in. (6.5 mm) Spacing: 12 in. (305 mm) Operating Depth: 3 - 5 in. (76 - 127mm)
      Heavy-duty rigid arm spring steel type
      scraper mounted to the bearings, adjustable individually or by complete gangs. UNITIZED GANGS (pre-assembled): (continued) Standard Bearing - Cartridge type regreasable, triple-sealed self-aligning ball bearings mounted to a high strength steel flange mount.
      Optional Rock Cushion Gang Bearing -
      Precision type regreasable, triple sealed trunnion mounted bearing with rubber bushings in a nodular iron housing.
      Front Gang
      1-1/2 in. square spring steel arbor bolts 6 in. diameter heavy-duty nodular iron spools with machined ends. Shallow Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid feathering blades 18 degree gang angle
      Rear Gang
      1-1/2 in. round spring steel arbor bolts 4.5 in. diameter heavy-duty nodular iron spools with machined ends. Full Concavity Earth Metal disk blades that are 24 in. (610 mm) x 0.256 in. (6.5 mm) solid with two 22 in. (559 mm) x 0.256 in. (6.5 mm) solid and two 20 in. (508 mm) x 0.256 in. (6.5 mm) solid feathering blades 16 degree gang angle
      HYDRAULICS:
      3000 PSI hydraulic cylinders, hoses, fittings Male ISO couplers on hydraulic hoses to tractor Positive stop mechanical depth control on main lift cylinders Optional hydraulic adjustable disk gang depth control
      WHEELS AND TIRES:
      6 Bolt heavy-duty hubs with replaceable spindles 12.5L x 15, 8PR tires for 5 shank model - standard 12.5L x 15, 12PR tires for 5 shank model - option (for improved stubble resistance) 12.5L x 15, 12PR tires for 7 shank model - standard Torque tube (stabilizing beam) for walking beam axle
      TRANSPORT:
      ASAE highway transport chain Warning and tail lights SMV emblem and reflectors Optional wing fold cylinder on 17 ft. 6 in. (5.3 m)
      Transport Width
      5 shank - 15 ft. 11 in. (4.84 m) 7 shank - 18 ft. (5.48 m) hydraulic folding model 7 shank - 21 ft. 9 in. (6.63 m) non-folding model
      DIMENSIONS:
      Working Width 5 shank - 12 ft. 6 in. (3.81 m) 7 shank - 17 ft. 6 in. (5.33 m)
      Overall Length
      5 shank - 30 ft. 1 in. (9.17 m) 7 shank - 31 ft. 5 in. (9.57 m)
      Typical Machine Weights
      5 shank - 9,680 lbs. (4,400 kg) 7 shank - 11,960 lbs. (5,436 kg)
      Requirements for Operation:
      Operating guidelines: varies with soil conditions
      Drawbar HP required at 10-20 dbHp/ft.:
      5 shank at 12 ft. 6 in. (3.81 m) - 190 - 380 Engine Hp 7 shank at 17 ft. 6 in. (5.33 m) - 265 - 530 Engine Hp
      Recommended ground speed:
      5.0 - 7 MPH (7.2 - 11.3 KPH)
      Minimum required tractor hydraulic
      pressure: 1800 PSI (12,410 kPa)
      12 volt electrical system with 7-pin
      connector
  • ECOLO-TIGER 875 [ Versions ]
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
    • HITCH SYSTEM:
      Power pin clevis: Cat IV (7 & 9 shank), Cat V (11 & 13 shank) Parking jack Swinging hose stand
      FRAME:
      Main Frame: 6 x 6 in. (152 x 203 mm) hi-strength heavy wall tubing Clearance: 36-1/2 in. (927 mm) from underside of frame to shank tip
      DISKS ON DOUBLE RANK X-FRAME WITH SPRING C-HANGER:
      Front mounted 24 in. dia individual disks on 15 in. centers Optional 26 in. dia. gang disks on 12 in. centers with bearing shield
      SHANKS AND POINTS:
      Choose from shear bolt shank mount or Maintenance-free SR13 Spring Reset 1-1/4 in. x 4 in. Main Parabolic shanks 2 in. straight points with the option to choose from 7 in. tiger points for excellent soil tilth through unique lift, twist and roll action Wear Shins or 4 in. coverboards are optional
      DEPTH CONTROL:
      Single point hydraulic depth control Now Standard
      REAR DISK LEVELER:
      18 in. blades on cast mounting arm standard all sizes
      Optional rear attachment
      (in addition to disk levelers) - 5-bar HD spike harrow - 3-bar HD coil tine harrow - Double edge mounted reel - Double edge mtd reel w/hyd control
      WHEELS AND TIRES:
      14 ft. & 18 Ft. Two Recapped Truck Tires 425/65R x 22.5 LR=L tubeless 22 ft. & 26 ft. Four Walking Tandem 16.5L x 16.1 FI LR=E with tubes
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE LED Warning and taillights with a 7-pin connector Disk frame check valve
      TRANSPORT AND WORKING WIDTH:
      Transport Width: 7 Shank - 16 ft. 4 in. (4.98 m) 9 Shank - 16 ft. 10 in. (5.13 m) 11 Shank - 18 ft. 1 in. (5.51 m) 13 Shank - 18 ft. 7 in. (5.66 m) Working Width: 7 Shank - 14 ft. (4.27 m) 9 Shank - 18 ft. (5.49 m) 11 Shank - 22 ft. (6.71 m) 13 Shank - 26 ft. (7.92 m)
      Requirements for Operation:
      Engine hp: (vary with soil conditions) 7 Shank 280 - 420 9 Shank 360 - 520 11 Shank 440 - 620 13 Shank 520 & up
      Recommended operating speed:
      5 to 7 mph
      Minimum required tractor:
      Hydraulic pressure - 2200 PSI Hydraulic outlet - up to 5 sets for 18-26 ft. width when equipped with
  • ecolo-tiger 527B [ Versions ]
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand
      FRAME:
      4 in./102 mm x 8 in./203 mm hitch frame 4 in./102 mm x 6 in./152 mm mainframe
      DISKS:
      Front mounted disks on double rank; 20 in. disks indexed to create 7-1/2 in. spacing
      SHANKS AND POINTS:
      Choose from spring reset shank mounts or shear bolt shank mounts 1-1/4 in. x 3 in. Main Parabolic (SR12) shanks 2 in. straight points with the option to choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      12.5L x 15, 10PR Tubeless tires 6-Bolt hubs and welded spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      Transport Width: Standard - 14 ft. (3.66 m) Working Width: Standard - 11 ft. 3 in. (3.43 m) (27" Spacing) Adjustable - 10 ft. - 12 ft. 6 in. (3.0 - 3.81 m) (24" or 30" Spacing)
      Requirements for Operation:
      Vary with soil conditions 163 - 221 Engine horsepower Recommended operating speed: 4.5 to 6 mph Minimum required tractor hydraulic pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand
      FRAME:
      4 in./102 mm x 8 in./203 mm hitch frame 4 in./102 mm x 6 in./152 mm mainframe
      DISKS:
      Front mounted disks on double rank; 20 in. disks indexed to create 7-1/2 in. spacing
      SHANKS AND POINTS:
      Choose from spring reset shank mounts or shear bolt shank mounts 1-1/4 in. x 3 in. Main Parabolic (SR12) shanks 2 in. straight points with the option to choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      12.5L x 15, 10PR Tubeless tires 6-Bolt hubs and welded spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      Transport Width: Standard - 14 ft. (3.66 m) Working Width: Standard - 11 ft. 3 in. (3.43 m) (27" Spacing) Adjustable - 10 ft. - 12 ft. 6 in. (3.0 - 3.81 m) (24" or 30" Spacing)
      Requirements for Operation:
      Vary with soil conditions 163 - 221 Engine horsepower Recommended operating speed: 4.5 to 6 mph Minimum required tractor hydraulic pressure: 2000 PSI
  • ecolo-tiger 530C [ Versions ]
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
  • ecolo-tiger 730C [ Versions ]
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI
    • HITCH SYSTEM:
      Combination single and double clevis Parking jack Swinging hose stand reduces hydraulic hose pinching and provides storage for electrical connectors
      FRAME:
      4 in. (102 mm) x 8 in. (203 mm) Hitch frame 6 in. (152 mm) x 8 in. (203 mm) Mainframe 730C has folding rear disk frame and disk leveler
      SHANKS AND POINTS:
      Choose from auto reset shank mounts or shear bolt shank mounts 1-1/2 in. x 6 in. Main Parabolic shanks Choose from a variety of tiger points providing excellent soil tilth through unique lift, twist and roll action
      DISKS:
      Front cushion-mounted disks on double rank X-frame with heavy-duty C-hangers 24 in. shallow-concavity crimped-center earth metal blades for more penetration and longer life Blades are indexed to create 7-1/2 in. spacing
      REAR DISK LEVELER:
      18 in. diameter blades indexed to main shanks fill soil in over shank path Hydraulic control depth from tractor cab with mechanical depth stops Triple V seals in hubs
      WHEELS AND TIRES:
      16.5L x 16.1 14PR Tubeless tires on 530C 16.5L x 16.1 FI (load range E) Tubeless tires on 730C Increased capacity 8-Bolt replaceable hubs and spindles
      HYDRAULICS AND TRANSPORT SYSTEM:
      3000 PSI hydraulics with ISO couplers on hoses ASAE Highway transport chain SMV emblem and reflectors ASAE Warning and taillights with a 7-pin connector
      TRANSPORT AND WORKING WIDTH:
      530C: Transport width - 14 ft. 8 in. (4.47 m) Working width - 12 ft. 6 in. (3.8 m) 730C: Transport width - 16 ft. 5 in. (5.0 m) Working width - 17 ft. 6 in. (3.8 m)
      Requirements for Operation:
      OPERATING GUIDELINES: Vary with soil conditions
      204 - 279 Engine horsepower on 530C
      285 - 390 Engine horsepower on 730C
      Recommended operating speed:
      4.5 to 6 mph
      Minimum required tractor hydraulic
      pressure: 2000 PSI