• Summary

Your Summary

PRIMARY TILLAGE: IN-LINE RIPPERS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • ECOLO-TIL 2500 [ Versions ]
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a
    • A & B MAINFRAMES:
      The A Mainframe is 99 in.wide The B Mainframe is 133 in. wide Double bar 4 in. x 6 in. tubing, 20 in. rank 3-pt. hitch with Cat. II and III pins Parking stand (qty 1)
      C & D MAINFRAMES:
      The C Mainframe is 135 in. wide The D Mainframe is 170 in. wide Double bar 6 in. x 6 in. tubing, 22 in. rank 3-pt. hitch with Cat. III pins Parking stands (qty 2)
      SHANKS, SHANK MOUNTS AND POINTS:
      1 1/4" x 3" Parabolic shanks Shear Bolt Shank Mounts 2" Straight Points
      COULTER:
      22" Coulter
      COMMON STANDARD FEATURES:
      Two (2) screw-adjust gauge wheels per machine, with 20.5 x 8 tires SMV emblem and reflectors Warning and tail lights with a 7-Pin connector (all sizes)
      13 - 17 Engine horsepower per foot or
      33 Engine horsepower per shank in lighter, looser soils 44 Engine horsepower per shank in hard, tight, very compacted soils
      Recommended maximum working
      speed is 6 mph Guidelines are affected by: operating depth and speed, points, shanks and how the 2500 is optioned; e.g., coulters, coverboards, levelers, bedders, etc.
      Requirements for Operation:
      (continued) ORDERING INSTRUCTIONS: Use the 2500 Application Guideline Chart to determine which Base Machine, Options and Accessories should be ordered to equip the ecolo-til 2500 for the customer's tillage application.
      Where two Mainframe options are
      available for the same size machine, use the 2500 Configuration Chart to help identify the best configuration for your customer.
      Order the appropriate one considering
      the following: - Are there additional row spacings the farmer may want to use that fit one Mainframe over another? - Is transport width a consideration? - Will the farmer want to increase the size of the ecolo-til 2500 in the future? - Does the farmer want a rigid machine or folding wings?
      The 2500 Configuration Chart also
      identifies which Row Markers, if applicable, can be used with a