• Summary

Your Summary

PULL-TYPE FORAGE HARVESTER
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.

2. Select a model

  • FHX300 Pull-Type Forage Harvester W/ CRP PROC [ Versions ]
    • CUTTERHEAD:
      25-1/2 in. wide, 21 in. diameter cutterhead with 12 knives 1000 rpm, equal angle PTO drive 300 hp capable (250 hp constant, up to 300 hp intermittent loads) Hard-faced underbeveled knives (single edged) 3 in. manual knife sharpener with traverse bearings Quick-adjust reversible shear bar Quick-change cutterhead reversing system
      FEEDROLLS:
      Flip up feed rolls Recutter capability Easy change length of cut Quick attachment mounting Electronic metal detector (includes standard upper feedroll drive slip clutch) Electric clutch for reversing feed rolls and attachment Shearbolt protected 11-1/2 in. transfer auger Electric control with joystick
      BLOWER:
      3-paddle blower PTO attachment drive Adjustable spout and spout liner
      HITCH AND FRAME:
      Heavy-duty frame with standard long tongue 14L x 16.1, 8PR implement tires (standard axle) 11L x 15-15, 6PR implement tires (tandem axle) Hydraulic swing tongue Heavy-duty jack Toolbox Complete brake/flash/turn signal lights Replaceable crop guides Highway transport chain
      Requirements for Operation:
      Dealer supplied hoses from hitch to tractor are required for operation.
      Note: A bolt-on hitch extension
      (Parts Division Supplied Accessory 715298006) is required for tractors that cannot extend the drawbar to 24 inches.
    • CUTTERHEAD:
      25-1/2 in. wide, 21 in. diameter cutterhead with 12 knives 1000 rpm, equal angle PTO drive 300 hp capable (250 hp constant, up to 300 hp intermittent loads) Hard-faced underbeveled knives (single edged) 3 in. manual knife sharpener with traverse bearings Quick-adjust reversible shear bar Quick-change cutterhead reversing system
      FEEDROLLS:
      Flip up feed rolls Recutter capability Easy change length of cut Quick attachment mounting Electronic metal detector (includes standard upper feedroll drive slip clutch) Electric clutch for reversing feed rolls and attachment Shearbolt protected 11-1/2 in. transfer auger Electric control with joystick
      BLOWER:
      3-paddle blower PTO attachment drive Adjustable spout and spout liner
      HITCH AND FRAME:
      Heavy-duty frame with standard long tongue 14L x 16.1, 8PR implement tires (standard axle) 11L x 15-15, 6PR implement tires (tandem axle) Hydraulic swing tongue Heavy-duty jack Toolbox Complete brake/flash/turn signal lights Replaceable crop guides Highway transport chain
      Requirements for Operation:
      Dealer supplied hoses from hitch to tractor are required for operation.
      Note: A bolt-on hitch extension
      (Parts Division Supplied Accessory 715298006) is required for tractors that cannot extend the drawbar to 24 inches.
  • FHX300 Pull-Type Forage Harvester W/O CRP PROC [ Versions ]
    • CUTTERHEAD:
      25-1/2 in. wide, 21 in. diameter cutterhead with 12 knives 1000 rpm, equal angle PTO drive 300 hp capable (250 hp constant, up to 300 hp intermittent loads) Hard-faced underbeveled knives (single edged) 3 in. manual knife sharpener with traverse bearings Quick-adjust reversible shear bar Quick-change cutterhead reversing system
      FEEDROLLS:
      Flip up feed rolls Recutter capability Easy change length of cut Quick attachment mounting Electronic metal detector (includes standard upper feedroll drive slip clutch) Electric clutch for reversing feed rolls and attachment Shearbolt protected 11-1/2 in. transfer auger Electric control with joystick
      BLOWER:
      3-paddle blower PTO attachment drive Adjustable spout and spout liner
      HITCH AND FRAME:
      Heavy-duty frame with standard long tongue 14L x 16.1, 8PR implement tires (standard axle) 11L x 15-15, 6PR implement tires (tandem axle) Hydraulic swing tongue Heavy-duty jack Toolbox Complete brake/flash/turn signal lights Replaceable crop guides Highway transport chain
      Requirements for Operation:
      Dealer supplied hoses from hitch to tractor are required for operation.
      Note: A bolt-on hitch extension
      (Parts Division Supplied Accessory 715298006) is required for tractors that cannot extend the drawbar to 24 inches.
    • CUTTERHEAD:
      25-1/2 in. wide, 21 in. diameter cutterhead with 12 knives 1000 rpm, equal angle PTO drive 300 hp capable (250 hp constant, up to 300 hp intermittent loads) Hard-faced underbeveled knives (single edged) 3 in. manual knife sharpener with traverse bearings Quick-adjust reversible shear bar Quick-change cutterhead reversing system
      FEEDROLLS:
      Flip up feed rolls Recutter capability Easy change length of cut Quick attachment mounting Electronic metal detector (includes standard upper feedroll drive slip clutch) Electric clutch for reversing feed rolls and attachment Shearbolt protected 11-1/2 in. transfer auger Electric control with joystick
      BLOWER:
      3-paddle blower PTO attachment drive Adjustable spout and spout liner
      HITCH AND FRAME:
      Heavy-duty frame with standard long tongue 14L x 16.1, 8PR implement tires (standard axle) 11L x 15-15, 6PR implement tires (tandem axle) Hydraulic swing tongue Heavy-duty jack Toolbox Complete brake/flash/turn signal lights Replaceable crop guides Highway transport chain
      Requirements for Operation:
      Dealer supplied hoses from hitch to tractor are required for operation.
      Note: A bolt-on hitch extension
      (Parts Division Supplied Accessory 715298006) is required for tractors that cannot extend the drawbar to 24 inches.
  • GENERAL:
    76.5 in./1.9m width (tine-to-tine) 90.5 in./2.3m width (end-to-end) 120 steel tines Heavy duty windguard Finger feed auger
    (For use with FHX300 pull-type forage
    harvester)
  • GENERAL:
    92 in./2.3m width (tine-to-tine) 105 in./2.7m width (end-to-end) 144 rubber tines H-D drives Heavy duty windguard Finger feed auger
    (For use with FHX300 pull-type forage
    harvester)
  • GENERAL:
    3 Row Row spacing - 28 to 32 in./ 71 to 81cm PTO shaft driven with slip clutch protection Floating points Adjustable skid shoes Spring loaded rotary cutoff knives R & LH Power dividers Stalk deflectors Additional header flotation spring
    (For use with FHX300 pull-type forage
    harvester)