You must login to manage your saved config group.
Select a model
Options
Accessories
Summary
Request a quote
2. Select a model
FOR USE WITH:
Twine models SB521, SB531, SB541 Balers (Prior twine models SBX521, SBX531, SBX541) Cannot be used with SB541c Commerical Version, or model SB551 balers
HITCH:
Two Position Wagon Hitch
ROLLS:
Two Thrower Belts Adjustable Roll Positions Swing-up Lower Roll Electric Speed and Hydraulic Direction Control Travel Lock
MISCELLANEOUS:
Visible Speed Indicator
BALE FORMING:
14 in. x 18 in./35.5cm x 45.7cm Bale Chamber 79 strokes per minute plunger mounted on 5 sealed ball bearing rollers and 2 slide blocks Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales Bale Counter 6 Hay Dogs
BALE TYING:
Hardened steel bill-hook Rollers and Knotter Cams Hard faced needles Gear Driven Knotters 4-Ball Twine Box
PICK-UP:
65 in./1.65m 4-bar pickup with 88 curved fingers, gauge wheel, belt and chain drive 283 sq. in./.183sq.m Feed Opening Adjustable feeder back
TIRES:
25 x 7.50-15, 6PR Right and 27 x 9.50-15, 6PR Left
HITCH:
Heavy-duty Screw Type Jack Rope controlled Tongue Latch Long Tongue, Hitch and Jack
DRIVE:
Enclosed Automotive-type Hypoid Gear and Pinion Main Drive Gearbox 3-Joint HD Power Pivot PTO
MISCELLANEOUS:
Variable Windguard Conveniently located toolbox Highway Transport Chain
Requirements for Operation:
35 PTO horsepower minimum
BALE FORMING:
14 in. x 18 in./35.5cm x 45.7cm Bale Chamber 93 strokes per minute plunger mounted on 5 sealed ball bearing rollers and 2 slide blocks Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales Bale Counter 6 Hay Dogs
BALE TYING:
Hardened steel bill-hook Rollers and Knotter Cams on Twine Balers Hard faced needles Gear Driven Knotters 6-Ball Twine Box
PICK-UP:
65 in./1.65m 5-bar pickup with 110 curved fingers, gauge wheel, belt and chain drive 283 sq. in./.183sq.m Feed Opening Rotary Feeding System (2 rotors)
TIRES:
27 x 9.50-15, 6PR Right and 31 x 13.50-15, 6PR Left
HITCH:
Heavy-duty Screw Type Jack Rope controlled Tongue Latch Clevis Hitch
DRIVE:
Enclosed Automotive-type Hypoid Gear and Pinion Main Drive Gearbox 3-Joint HD Power Pivot PTO Drive (Cat. 6) Heavy-duty Wheels and Spindles
MISCELLANEOUS:
Conveniently located toolbox Highway Transport Chain
Requirements for Operation:
62 PTO horsepower minimum
- SB541 Square Baler [ Versions ]
BALE FORMING:
14 in. x 18 in./35.5cm x 45.7cm Bale Chamber 93 strokes per minute plunger mounted on 5 sealed ball bearing rollers and 2 slide blocks Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales 4-Way Bale Tension (2 Doors) Bale Counter 6 Hay Dogs
BALE TYING:
Heavy-duty Knotters with hardened steel bill-hook Rollers and Knotter Cams on Twine Balers Gear Driven Knotters/ Twisters Hard faced needles 8-Ball Twine Box (twine balers) 4-Coil Wire Carrier (wire balers)
PICK-UP:
75 in./1.91m 6-bar pickup with 156 curved fingers, gauge wheel with roller bearings, belt and chain drive 283 sq. in./.183sq.m Feed Opening Rotary Feeding System (3 rotors) Replaceable Feeder Floor
TIRES:
27 x 9.50-15, 6PR Right and 31 x 13.50-15, 6PR Left
HITCH:
Clevis Hitch Heavy-duty Screw Type Jack Rope controlled Tongue Latch
DRIVE:
Enclosed Automotive-type Hypoid Gear and Pinion Main Drive Gearbox 3-Joint HD Power Pivot PTO Drive (Cat. 6) 3 Disc Slip Clutch Heavy-duty Wheels and Spindles
MISCELLANEOUS:
Conveniently located toolbox Highway Transport Chain
Requirements for Operation:
75 PTO horsepower minimum
SB541C COMMERCIAL VERSION (TWINE):
The SB541c Commercial Version includes all of the SB541features with the following exceptions and additions: HIgh flotation tires - 11L-14, 6PR Right and 14L-16.1, 8PR Left Longer, heavier gauge bale case Hydra Tension bale tension 4-way bale tension with hydraulically controlled side tension rails Hardened plunger rail Cast front hay wedges Wider/deeper 8 ball twine box (same as SB551) Hydraulic pickup lift Hydraulic swing tongue Standard clevis and optional ball hitch
Note: The SB541c Commercial Version
cannot be used with the BTX11 Bale Thrower.
BALE FORMING:
14 in. x 18 in./35.5cm x 45.7cm Bale Chamber 93 strokes per minute plunger mounted on 5 sealed ball bearing rollers and 2 slide blocks Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales 4-Way Bale Tension (2 Doors) Bale Counter 6 Hay Dogs
BALE TYING:
Heavy-duty Knotters with hardened steel bill-hook Rollers and Knotter Cams on Twine Balers Gear Driven Knotters/ Twisters Hard faced needles 8-Ball Twine Box (twine balers) 4-Coil Wire Carrier (wire balers)
PICK-UP:
75 in./1.91m 6-bar pickup with 156 curved fingers, gauge wheel with roller bearings, belt and chain drive 283 sq. in./.183sq.m Feed Opening Rotary Feeding System (3 rotors) Replaceable Feeder Floor
TIRES:
27 x 9.50-15, 6PR Right and 31 x 13.50-15, 6PR Left
HITCH:
Clevis Hitch Heavy-duty Screw Type Jack Rope controlled Tongue Latch
DRIVE:
Enclosed Automotive-type Hypoid Gear and Pinion Main Drive Gearbox 3-Joint HD Power Pivot PTO Drive (Cat. 6) 3 Disc Slip Clutch Heavy-duty Wheels and Spindles
MISCELLANEOUS:
Conveniently located toolbox Highway Transport Chain
Requirements for Operation:
75 PTO horsepower minimum
SB541C COMMERCIAL VERSION (TWINE):
The SB541c Commercial Version includes all of the SB541features with the following exceptions and additions: HIgh flotation tires - 11L-14, 6PR Right and 14L-16.1, 8PR Left Longer, heavier gauge bale case Hydra Tension bale tension 4-way bale tension with hydraulically controlled side tension rails Hardened plunger rail Cast front hay wedges Wider/deeper 8 ball twine box (same as SB551) Hydraulic pickup lift Hydraulic swing tongue Standard clevis and optional ball hitch
Note: The SB541c Commercial Version
cannot be used with the BTX11 Bale Thrower.
BALE FORMING:
14 in. x 18 in./35.5cm x 45.7cm Bale Chamber 93 strokes per minute plunger mounted on 5 sealed ball bearing rollers and 2 slide blocks Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales 4-Way Bale Tension (2 Doors) Bale Counter 6 Hay Dogs
BALE TYING:
Heavy-duty Knotters with hardened steel bill-hook Rollers and Knotter Cams on Twine Balers Gear Driven Knotters/ Twisters Hard faced needles 8-Ball Twine Box (twine balers) 4-Coil Wire Carrier (wire balers)
PICK-UP:
75 in./1.91m 6-bar pickup with 156 curved fingers, gauge wheel with roller bearings, belt and chain drive 283 sq. in./.183sq.m Feed Opening Rotary Feeding System (3 rotors) Replaceable Feeder Floor
TIRES:
27 x 9.50-15, 6PR Right and 31 x 13.50-15, 6PR Left
HITCH:
Clevis Hitch Heavy-duty Screw Type Jack Rope controlled Tongue Latch
DRIVE:
Enclosed Automotive-type Hypoid Gear and Pinion Main Drive Gearbox 3-Joint HD Power Pivot PTO Drive (Cat. 6) 3 Disc Slip Clutch Heavy-duty Wheels and Spindles
MISCELLANEOUS:
Conveniently located toolbox Highway Transport Chain
Requirements for Operation:
75 PTO horsepower minimum
SB541C COMMERCIAL VERSION (TWINE):
The SB541c Commercial Version includes all of the SB541features with the following exceptions and additions: HIgh flotation tires - 11L-14, 6PR Right and 14L-16.1, 8PR Left Longer, heavier gauge bale case Hydra Tension bale tension 4-way bale tension with hydraulically controlled side tension rails Hardened plunger rail Cast front hay wedges Wider/deeper 8 ball twine box (same as SB551) Hydraulic pickup lift Hydraulic swing tongue Standard clevis and optional ball hitch
Note: The SB541c Commercial Version
cannot be used with the BTX11 Bale Thrower.
BALE FORMING:
16 in. x 18 in./40.6cm x 45.7cm Bale Chamber 93 strokes per minute plunger mounted on 6 sealed ball bearing rollers and 2 slide blocks 30 in./76.2cm Plunger Travel Heavy-duty Bale Case Bale Length Control for 12 in./30.5cm to 52 in./132cm length bales 4-Way Bale Tension (4 Doors) Hydra Tension Bale Tension Bale Case Extension Kit Bale Counter 6 Hay Dogs Quarter Turn Bale Chute
BALE TYING:
Heavy-duty Knotters with hardened steel bill-hook Rollers and Knotter Cams Hard faced needle and eye Gear Driven Knotters 8-Ball Twine Box
PICK-UP:
75 in./1.91m 6-bar pickup with 156 curved fingers, gauge wheel with roller bearings, belt and chain drive 318 sq. in./.205sq.m Feed Opening Rotary Feeding System (3 rotors) Hydraulic pickup lift unit
TIRES:
11L-14, 6PR Right and 14L-16.1, 8PR Left
HITCH:
Heavy-duty Screw Type Jack Rope controlled Tongue Latch Hydraulic swing tongue
DRIVE:
Enclosed Automotive-type, Heavy-duty Hypoid Gear and Pinion Plunger Drive Gearbox 3-Joint HD Power Pivot PTO Drive (Cat. 6) 3 Disc Slip Clutch Heavy-duty Wheels and Spindles
MISCELLANEOUS:
Highway transport chain Conveniently located toolbox Parking jack Halogen Work Lights
Requirements for Operation:
80 PTO horsepower minimum
Note: The SB551 Baler cannot be used
with the BTX11 Bale Thrower