FRAME:
40 ft. (12.19 m) operating width Two rank stationary toolbar with rotating sub bars Three sections with hydraulic wing fold for transport
ROW UNITS:
Single Disk Openers LH and RH openers with 22-1/2 in. (57cm) disk Tapered roller bearings Unique grass wrap guard on blade hub 4-1/2 x 16 in. (11 x 40 cm) offset gauge wheel 1 x 12 in. (2.5 x 30 cm) press wheel Hard surfaced scraper
DEPTH CONTROL:
Depth adjustment increments from 1/4 in. to 3-1/2 in.
DOWN PRESSURE:
Three individual row unit pressure settings plus variable rank down pressure adjustment
HI-FLOTATION TIRES AND WHEELS:
Standard walking beams on both front and rear of drill All tires are stubble rated and include anti-puncture sealant 40ft. (12.19 m) width Wings: 31 x 13.5 x 15 10PR tires Main Frame: 31 x 13.5 x 15 14PR tires
TRANSPORT DIMENSIONS:
40ft. (12.19 m) width Transport Height 7-1/2 in. (19 cm) spacing - 15 ft. 8 in. (4.78 m) 10 in. (25 cm) spacing - 15 ft. 8 in. (4.78 m) 15 in. (38 cm) spacing - 15 ft. 8 in. (4.78 m) Transport Width 7-1/2 in. (19 cm) spacing - 16 ft. 8 in. (5.08 m) 10 in. (25 cm) spacing - 16 ft. 11 in. (5.16 m) 15 in. (38 cm) spacing - 16 ft. 8 in. (5.08 m) Drill Weight 7-1/2 in. (19 cm) spacing - 31,910 (14,474 kg) 10 in. (25 cm) spacing - 28,600 (12,973 kg) 15 in. (38 cm) spacing - 25,290 (11,472 kg)
RETURNABLE SHIPPING STANDS:
Specific instructions on process of returning shipping stands are in the Dealer Operating Guide.
NOTE: Drill meets ASAE 279.11
transport light and marking standards.
Requirements for Operation:
4 PTO hp minimum per opener*
Do not tow the implement at speeds
over 20 mph.
Do not tow a loaded air system while
transporting the implement between fields.
Do not tow more than two implements
behind the tractor while transporting between fields.
The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.
The total towed weight should be
reduced based on tractor condition and road conditions.
Minimum hydraulic pressure 2200 psi*
Requirements for Operation: (continued) Two hydraulic control valves for wing folding and row unit lift. An additional hydraulic control valve is required if markers are installed.
Tractor draw bar that can be locked
in a stationary position with an intermediate draw bar chain support
Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights
* Minimum requirements are a starting
point only and should be increased based on operating conditions in the field, road transport conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi or factory settings for individual tractors.
EX WORKS:
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)