2. Select a model

• CM109 Center-Pull Windrow Merger [ Versions ]
  • - PTO Driven Hydraulic Pump

    STANDARD FEATURES
    GENERAL:
    

    Fixed tongue with windrow-straddle pickup Pick up and merge swaths/windrows less than 9 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 9 ft. wide with 3 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Combination poly sheet and steel rod pickup windguard Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 6.70 x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16 gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @ 2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 14 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport lock for pickup Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut.

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of 30
    

    gals. of dealer supplied hydraulic fluid.
  • - Tractor Driven Hydraulics

    STANDARD FEATURES
    GENERAL:
    

    Fixed tongue with windrow-straddle pickup Pick up and merge swaths/windrows less than 9 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 9 ft. wide with 3 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Combination poly sheet and steel rod pickup windguard Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 6.70 x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16 gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @ 2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 14 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport lock for pickup Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut.

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of 30
    

    gals. of dealer supplied hydraulic fluid.
• CM209 Side-Pull Windrow Merger [ Versions ]
  • - PTO Driven Hydraulic Pump

    STANDARD FEATURES
    GENERAL:
    

    Hydraulic swing tongue with RH offset pickup Pick up and merge swaths/windrows less than 9 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 9 ft. wide with 3 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Roller windguard in front of pickup Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 9.5L x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability Tractor-mounted electric control box to control: Tongue swing Pickup raise/lower Lower/folding of (optional) conveyor extension

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 14 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport locks for pickup and tongue swing Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut. (merge up ot 14 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut. (merge up to 16 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 4 ft. extension -
    

    merge swaths/windrows made from machines with up to 16 ft. width of cut. (merge up to 18 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 6 ft. extension -
    

    merge swaths/windrows made from machines with up to 18 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of 30
    

    gals. of dealer supplied hydraulic fluid.
  • - Tractor Driven Hydraulics

    STANDARD FEATURES
    GENERAL:
    

    Hydraulic swing tongue with RH offset pickup Pick up and merge swaths/windrows less than 9 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 9 ft. wide with 3 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Roller windguard in front of pickup Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 9.5L x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability Tractor-mounted electric control box to control: Tongue swing Pickup raise/lower Lower/folding of (optional) conveyor extension

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 14 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport locks for pickup and tongue swing Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut. (merge up ot 14 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut. (merge up to 16 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 4 ft. extension -
    

    merge swaths/windrows made from machines with up to 16 ft. width of cut. (merge up to 18 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 6 ft. extension -
    

    merge swaths/windrows made from machines with up to 18 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of 30
    

    gals. of dealer supplied hydraulic fluid.
• CM212 Side-Pull Windrow Merger [ Versions ]
  • - PTO Driven Hydraulic Pump

    STANDARD FEATURES
    GENERAL:
    

    Hydraulic swing tongue with RH offset pickup Pick up and merge swaths/windrows less than 12 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 12 ft. wide with 4 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Roller windguard in front of pickup Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 9.5L x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability Tractor-mounted electric control box to control: Tongue swing Pickup raise/lower Lower/folding of (optional) conveyor extension

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 15 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport locks for pickup and tongue swing Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut. (merge up to 14 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut. (merge up to 16 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 4 ft. extension -
    

    merge swaths/windrows made from machines with up to 16 ft. width of cut. (merge up to 18 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 6 ft. extension -
    

    merge swaths/windrows made from machines with up to 18 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of
    

    30 gals. of dealer supplied hydraulic fluid.
  • - Tractor Driven Hydraulics

    STANDARD FEATURES
    GENERAL:
    

    Hydraulic swing tongue with RH offset pickup Pick up and merge swaths/windrows less than 12 ft. wide (Windrow inverting capability with optional attachment) Hydraulic pickup and conveyor drives Belt Pickup - 12 ft. wide with 4 sections Independent pickup flotation Replaceable 3-tine plastic pickup teeth 5.70x8 adjustable pickup gauge wheels Roller windguard in front of pickup Ribbed belt cross conveyor 14 ft. wide, 42 in. depth Right side crop delivery Anti-wrap cross conveyor bearing guards Independent pickup and conveyor speed adjustment (2) 9.5L x 15 in. Transport wheels and tires (1) 6.70 x 15 in. Tailwheel for added support and stability Tractor-mounted electric control box to control: Tongue swing Pickup raise/lower Lower/folding of (optional) conveyor extension

    HYDRAULICS:
    

    Tractor hydraulics powered, or self-contained system with PTO driven hydraulic pump Conveyor drive motor quick couplers to reverse cross conveyor for windrow inverting

    TRACTOR REQUIREMENTS:
    

    70 PTO hp (Minimum) Open or closed center system Tractor hydraulics powered version: (2) Tractor rear remote valves Double acting with detent and flow control on one or both valves One capable of 16gpm flow @ 2000 psi One for pickup raise/lower Self-contained PTO powered hydraulics version: (1) Tractor rear remote valve for pickup raise/lower Single or double acting Capable of 5 gpm flow @2000 psi

    Recommended operating speed -
    

    2 to 12 mph (3.2 to 19.3 kph) Maximum transport speed - 20 mph (32 kph) Transport width (without extension) - 15 ft. 4 in.

    LIGHTING:
    

    7-pin connector Transport lighting includes: Brake and tail lights Flashers and turn signals

    OTHER STANDARD EQUIPMENT:
    

    Clevis hitch Parking jack Transport locks for pickup and tongue swing Highway transport chain SMV emblem

    Requirements for Operation:
    

    Base unit (less extension) - merge swaths/windrows made from machines with 9 to 12 ft. width of cut. (merge up to 14 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 2 ft. extension -
    

    merge swaths/windrows made from machines with up to 14 ft. width of cut. (merge up to 16 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 4 ft. extension -
    

    merge swaths/windrows made from machines with up to 16 ft. width of cut. (merge up to 18 ft. width of cut for S.P. Forage Harvesters with wide pickup)

    Base unit with optional 6 ft. extension -
    

    merge swaths/windrows made from machines with up to 18 ft. width of cut.

    NOTE: Units with the self-contained
    

    pto driven hydraulic system are shipped with the hydraulic pump and reservoir loose, and without hydraulic fluid.

    Dealer set-up requires addition of
    

    30 gals. of dealer supplied hydraulic fluid.
• WR101 Wheel Rake [ Versions ]
  • - 10 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 19 ft. 10 wheel - 22 ft. 12 wheel - 25 ft. 7 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 10 ft. 2 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting with float

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain
  • - 12 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 19 ft. 10 wheel - 22 ft. 12 wheel - 25 ft. 7 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 10 ft. 2 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting with float

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain
  • - 8 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 19 ft. 10 wheel - 22 ft. 12 wheel - 25 ft. 7 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 10 ft. 2 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting with float

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain
• WR102 WHEEL RAKE [ Versions ]
  • - 10 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 18 ft. 10 wheel - 21 ft. 12 wheel - 24 ft. 6 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 8 ft. 5 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    The maximum raking angle and
    

    minimum width adjustment may cause rake tine inferference. The maximum raking angle may result in poorer raking performance.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain SMV sign
  • - 12 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 18 ft. 10 wheel - 21 ft. 12 wheel - 24 ft. 6 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 8 ft. 5 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    The maximum raking angle and
    

    minimum width adjustment may cause rake tine inferference. The maximum raking angle may result in poorer raking performance.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain SMV sign
  • - 8 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Carted "Vee"-Type rake 8, 10, and 12 wheel configurations High clearance frame design Hydraulic lift and lower of raking wheel frames 55 in. diameter raking wheels with (40) 7mm diam. tines Raking wheels supported on greasable tapered roller bearings Shock absorbing, constant ground contact pressure of each raking wheel Independent adjustable spring suspension of LH and RH frames Manual raking wheel frame angle adjustment Manual windrow width adjustment - from 3 ft. to 6 ft. 7 in. Right or left wheel frame raking capability (2) 205-75 x 15 in. tires For transport, wheel frames fold horizontally above main frame

    SPECIFICATIONS:
    

    Raking/Maximum working width: 8 wheel - 18 ft. 10 wheel - 21 ft. 12 wheel - 24 ft. 6 in. Minimum windrow width: (8, 10, 12 wheel) - 3 ft. Maximum windrow width: (8, 10, 12 wheel) - 6 ft. 7 in. Transport width: (8, 10, 12 wheel) - 8 ft. 5 in. Minimum transport height: (8, 10, 12 wheel) - 7 ft. 9 in Overall transport length: 8 wheel - 19 ft. 10 wheel - 19 ft. 12 wheel - 22 ft.

    The maximum raking angle and
    

    minimum width adjustment may cause rake tine inferference. The maximum raking angle may result in poorer raking performance.

    TRACTOR REQUIREMENTS:
    

    8 wheel - 30 hp (minimum) 10 wheel - 30 hp (minimum) 12 wheel - 50 hp (minimum) Tractor rear remote valve: 1 - double acting

    OTHER STANDARD EQUIPMENT:
    

    Adjustable clevis hitch Adjustable parking jack Wheel frame transport locks Highway transport chain SMV sign
• WR401 Heavy Duty Wheel Rake

  STANDARD FEATURES
  GENERAL:
  

  Offset design turns all crop, eliminates need for center kicker wheel(s) Twin, telescoping overhead frame design Hydraulic rake position adjustment 60 in. diameter raking wheels with 36 teeth (18 rubber-mounted double tines) Raking wheels supported on tapered roller bearings Poly, UV resistant raking wheel wind panels Independent raking wheel and gang ground pressure adjustment Mechanical adustment of frame pitch and raking wheel angle (adjustable from 0 to 10 degrees for more fluffy windrows) Walking beam axles with offset wheels (4) 9.5Lx15 SL tires

  HYDRAULICS:
  

  Electro-hydraulic independent control of rake functions including: LH and RH raking wheel lift control LH and RH raking frame angle control LH and RH frame telescoping for windrow width control Compatible with closed- or open-center systems (closed-center configuration from factory with easy converson to open-center)

  SPECIFICATIONS:
  

  Number of raking wheels - 17 (8 on LH frame and 9 on RH frame) Raking/Maximum working width - 30 ft. 3in. Maximum windrow width - 72 in. Transport width - 12 ft. 3 in. Transport length - 28 ft. 3 in.

  TRACTOR REQUIREMENTS:
  

  65 hp (minimum) Tractor rear remote valve 1 double acting (detent recommended) Maximum transport speed - 20 mph (32 kph)

  LIGHTING:
  

  7-pin connector Rear facing field work light Transport lighting includes: Brake and tail lights Flashers and turn signals

  OTHER STANDARD EQUIPMENT:
  

  Adjustable clevis hitch Adjustable parking jack Rake frame angle and wheel raise/lower transport locks Highway transport chain SMV emblem
• WRX201 Wheel Rake

  STANDARD FEATURES
  GENERAL:
  

  Trailed folding "Vee"-Type rake Caster wheel with adjustable friction disc brakes Hydraulic raking wheel lift 55 in. diameter raking wheels with (40) 7mm thick tines Individual ground contact pressure adjustment of each raking wheel Individual raking wheel flotation Heavy-duty greasable nylon bushing in each raking wheel pivot arm Hydraulic fold with check valve eliminates cylinder drift Ratchet-style windrow width adjustment from 3 ft. to 5 ft. (4) 205-75 x 15 in. tires

  SPECIFICATIONS:
  

  Number of raking wheels - 8 Raking/Maximum working width - 17 ft. 5 in. Transport width - 8 ft. 3 in. Overall length - 21 ft. 7 in.

  TRACTOR REQUIREMENTS:
  

  30 hp (minimum) 2 rear remote valves

  OTHER STANDARD EQUIPMENT:
  

  Highway transport chain
• WRX301 Wheel Rake [ Versions ]
  • - 12 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Trailed folding "Vee"-Type rake Caster wheel with adjustable friction disc brakes Hydraulic raking wheel lift 55 in. diameter raking wheels with (40) 7mm thick tines Individual ground contact pressure adjustment of each raking wheel Individual raking wheel flotation Heavy-duty greasable nylon bushing in each raking wheel pivot arm Hydraulic fold with check valve eliminates cylinder drift Ratchet-style windrow width adjustment from 3 ft. to 6 ft. Large 205-75 x 15 in. tires: (4) 12-wheel units (6) 14-wheel units

    SPECIFICATIONS:
    

    Number of raking wheels: 12 wheel - 12 14 wheel - 14 Raking/Maximum working width: 12 wheel - 25 ft. 14 wheel - 28 ft. 6 in. Transport width (12 and 14 wheel) - 8 ft. 3 in. Overall length: 12 wheel - 24 ft. 6 in. 14 wheel - 30 ft.

    TRACTOR REQUIREMENTS:
    

    12 wheel - 30 hp (minimum) 14 wheel - 40 hp (minimum) 2 rear remote valves

    OTHER STANDARD EQUIPMENT:
    

    Mainframe truss support on 14 wheel version Highway transport chain
  • - 14 Wheel Rake

    STANDARD FEATURES
    GENERAL:
    

    Trailed folding "Vee"-Type rake Caster wheel with adjustable friction disc brakes Hydraulic raking wheel lift 55 in. diameter raking wheels with (40) 7mm thick tines Individual ground contact pressure adjustment of each raking wheel Individual raking wheel flotation Heavy-duty greasable nylon bushing in each raking wheel pivot arm Hydraulic fold with check valve eliminates cylinder drift Ratchet-style windrow width adjustment from 3 ft. to 6 ft. Large 205-75 x 15 in. tires: (4) 12-wheel units (6) 14-wheel units

    SPECIFICATIONS:
    

    Number of raking wheels: 12 wheel - 12 14 wheel - 14 Raking/Maximum working width: 12 wheel - 25 ft. 14 wheel - 28 ft. 6 in. Transport width (12 and 14 wheel) - 8 ft. 3 in. Overall length: 12 wheel - 24 ft. 6 in. 14 wheel - 30 ft.

    TRACTOR REQUIREMENTS:
    

    12 wheel - 30 hp (minimum) 14 wheel - 40 hp (minimum) 2 rear remote valves

    OTHER STANDARD EQUIPMENT:
    

    Mainframe truss support on 14 wheel version Highway transport chain