Case IH Home
Build & price your own Case IH equipment
  • Summary

Your Summary

WINDROWERS & HEADERS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to view your saved config groups.
Select your region:  
Home > Hay & Forage > WINDROWERS & HEADERS

2. Select a model

  • WD1203 ENGINE:
    WD1203 @126 hp (94kW*) 274 CID (4.5L) 4-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically controlled fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Rotary Wand radiator screen cleaner 150 amp alternator (1) 12-volt 925 CCA low maintenance battery
    ENGINE:
    WD1203 @126 hp (94kW*) 274 CID (4.5L) 4-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically controlled fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Rotary Wand radiator screen cleaner 150 amp alternator (1) 12-volt 925 CCA low maintenance battery
    * Manufacturer's rating per ECE R120 / ISO 14396 TRANSMISSION:
    Two-speed range Hydrostatic
    * Manufacturer's rating per ECE R120 / ISO 14396 WD1903 ENGINE:
    WD1903 @190 hp (142kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396 WD2303 ENGINE:
    WD2303 @226 hp (169kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler WD2303 ENGINE: (continued) Above engine hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396
    ** TopSpin™ is a registered trademark of the Donaldson Company, Inc.
    TRANSMISSION:
    Two-speed range Hydrostatic
    CHASSIS:
    Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14Lx16.1 8PR rear tires WD1203 - Hydraulic header drive WD1903 and WD2303 - Variable speed hydrostatic header drive Header power reverser (in-cab control) WD1203 Non Draper - Hydraulic header flotation (in cab adjustable) WD1203 Draper Units, WD1903 and WD2303 - Deluxe hydraulic header flotation (flotation weight at each end of header independently controlled from cab) Hydraulic header tilt (in-cab control) Single lever header transport lock system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shield CHASSIS:(continued) (on non-draper windrowers only) Less header drive motor and hoses
    LIGHTING:
    (2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle
    OPERATOR CAB:
    Deluxe cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Windshield Wiper/Washer Air-conditioner and heater with manual temp control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Delco AM/FM Weather Band Radio with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communication) port locations with DIN mounting slots Business band antenna ready (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet EST (Electronic Service Tool) diagnostic port
    CONTROLS AND INSTRUMENTATION:
    Low-effort ground speed/forward- neutral-reverse control Multi Function Propulsion Lever (right hand console mounted) with push button controls for: Header raise/lower Header tilt control Monitor display selection Draper header only: Reel raise/lower, Reel fore/aft, Header cut height, Header lateral tilt Header engagement/reverser controls Header flotation adjustment Park brake control Horn Adjustable console mounted 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level, and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.
    PURCHASED PROTECTION:
    The Case IH Protection Plan (CPP) is available for this model.
    Requirements for Operation:
    See Chart in Appendix for details to
  • ENGINE:
    WD1903 @190 hp (142kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    WD1203 ENGINE:
    WD1203 @126 hp (94kW*) 274 CID (4.5L) 4-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically controlled fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Rotary Wand radiator screen cleaner 150 amp alternator (1) 12-volt 925 CCA low maintenance battery
    * Manufacturer's rating per ECE R120 / ISO 14396 WD1903 ENGINE:
    WD1903 @190 hp (142kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396
    **TopSpin™ is a registered trademark of the Donaldson Company, Inc.
    * Manufacturer's rating per ECE R120 / ISO 14396 WD2303 ENGINE:
    WD2303 @226 hp (169kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler WD2303 ENGINE: (continued) Above engine hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396
    ** TopSpin™ is a registered trademark of the Donaldson Company, Inc.
    TRANSMISSION:
    Two-speed range Hydrostatic
    CHASSIS:
    Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14Lx16.1 8PR rear tires WD1203 - Hydraulic header drive WD1903 and WD2303 - Variable speed hydrostatic header drive Header power reverser (in-cab control) WD1203 Non Draper - Hydraulic header flotation (in cab adjustable) WD1203 Draper Units, WD1903 and WD2303 - Deluxe hydraulic header flotation (flotation weight at each end of header independently controlled from cab) Hydraulic header tilt (in-cab control) Single lever header transport lock system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shield CHASSIS:(continued) (on non-draper windrowers only) Less header drive motor and hoses
    LIGHTING:
    (2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle
    OPERATOR CAB:
    Deluxe cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Windshield Wiper/Washer Air-conditioner and heater with manual temp control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Delco AM/FM Weather Band Radio with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communication) port locations with DIN mounting slots Business band antenna ready (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet EST (Electronic Service Tool) diagnostic port
    CONTROLS AND INSTRUMENTATION:
    Low-effort ground speed/forward- neutral-reverse control Multi Function Propulsion Lever (right hand console mounted) with push button controls for: Header raise/lower Header tilt control Monitor display selection Draper header only: Reel raise/lower, Reel fore/aft, Header cut height, Header lateral tilt Header engagement/reverser controls Header flotation adjustment Park brake control Horn Adjustable console mounted 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level, and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.
    PURCHASED PROTECTION:
    The Case IH Protection Plan (CPP) is available for this model.
    Requirements for Operation:
    See Chart in Appendix for details to
  • WD1203 ENGINE:
    WD1203 @126 hp (94kW*) 274 CID (4.5L) 4-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically controlled fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Rotary Wand radiator screen cleaner 150 amp alternator (1) 12-volt 925 CCA low maintenance battery
    ENGINE:
    WX2303 @226 hp (169kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above engine hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396
    ** TopSpin™ is a registered trademark of the Donaldson Company, Inc.
    * Manufacturer's rating per ECE R120 / ISO 14396 WD1903 ENGINE:
    WD1903 @190 hp (142kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    * Manufacturer's rating per ECE R120 / ISO 14396 WD2303 ENGINE:
    WD2303 @226 hp (169kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler WD2303 ENGINE: (continued) Above engine hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries
    TRANSMISSION:
    Two-speed range Hydrostatic
    CHASSIS:
    Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14Lx16.1 8PR rear tires Variable speed hydrostatic header drive Header power reverser (in-cab control) Deluxe hydraulic header flotation (flotation weight at each end of header independently controlled from cab) Hydraulic header tilt (in-cab control) with deluxe indicator Single lever header transport lock system Header lift arm quick latch system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shield (on non-draper windrowers only) Less header drive motor and hoses
    * Manufacturer's rating per ECE R120 / ISO 14396
    ** TopSpin™ is a registered trademark of the Donaldson Company, Inc.
    LIGHTING:
    (2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle
    OPERATOR CAB:
    Deluxe cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Air-conditioner and heater with manual temp control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Radio-ready with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communication) port locations with DIN mounting slots Business band antenna ready Windshield wiper/washer (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet EST (Electronic Service Tool) diagnostic port
    CONTROLS AND INSTRUMENTATION:
    (continued) Header flotation adjustment Park brake control Horn Adjustable console mounted 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level, and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.
    PURCHASED PROTECTION:
    The Case IH Protection Plan (CPP) is available for this model.
    Requirements for Operation:
    See Chart in Appendix for details to adapt DHX draper headers
  • DH212:
    21 ft. (6.4m) cutting width Double knife only Double swath center opening - 50 in. (1.27m) Double swath side opening - 45 in. (1.14m)
    KNIFE DRIVE:
    Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
    CUTTING SYSTEM:
    Double Sickle: Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
    DRAPER BELTS:
    42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
    REEL:
    UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
    OTHER EQUIPMENT:
    Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
    Requirements for Operation:
    See Chart in Appendix for details to adapt DH draper headers.
    A draper head adapter kit is required to
    attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    Windrowers equipped with 23.1 x 26
    and 21L x 28 tires are not recommended for use with a 21 ft. double swath head.
  • DH252 DRAPER HEADER [ Versions ]
    • DH252:
      25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH252:
      25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH252:
      25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH252:
      25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
  • DH302 DRAPER HEADER [ Versions ]
    • DH302:
      30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH302:
      30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH302:
      30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH302:
      30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
      Double Sickle:
      Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
  • DH362 DRAPER HEADER [ Versions ]
    • DH362:
      36 ft. (11m) cutting width Double knife only Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 48 in. (1.22m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Double Sickle: Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
    • DH362:
      36 ft. (11m) cutting width Double knife only Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 48 in. (1.22m) Castoring Gauge Wheels
      KNIFE DRIVE:
      Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
      CUTTING SYSTEM:
      Double Sickle: Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
      DRAPER BELTS:
      42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
      REEL:
      UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
      OTHER EQUIPMENT:
      Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
      Requirements for Operation:
      See Chart in Appendix for details to adapt DH draper headers.
      A draper head adapter kit is required to
      attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
  • HDX142 Sicklebar Header for Mower Conditioner [ Versions ]
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
  • HDX162 Sicklebar Header for Mower Conditioner [ Versions ]
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submittedby October 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submittedby October 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submittedby October 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
  • HDX182 Sicklebar Header for Mower Conditioner [ Versions ]
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
    • ALSO USED WITH:
      WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
      CHASSIS:
      18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
      HEADER DRIVE:
      Hydraulically driven header Less header drive motor
      REEL:
      Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
      HAY CONDITIONER:
      Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
      Requirements for Operation:
      If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
      For use with SC101 Pivot Tongue for
      Mower Conditioner
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2012.
      This can be ordered with the
      Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
      For use with WD Series SP Windrowers
      Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2012.
  • RD132 DISC HEADER [ Versions ]
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers High density polyethylene impact resistant hood liner
      CUTTERBED:
      13 ft. (3.9m) cutting width 10 disc modular cutterbar with crop lifters Cutterbar shock protection system
      HAY CONDITIONER:
      102 in. (2.6m) wide, 10-3/8 in. (.26m) diameter conditioning rolls High speed conditioning rolls (920 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. (.96m) to 96 in. (2.4m)
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303 self-propelled windrowers.
      To avoid running over uncut crop
      during field operation, windrower tractor cannot be equipped with 580/70R26 or 600/65R28 drive tires.
      Not compatible with WDX or WD
      Windrowers equipped with factory or dealer installed draper head adapter kits.
      EX WORKS:
      Wholegoods (Ex Works New Holland, PA)
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers High density polyethylene impact resistant hood liner
      CUTTERBED:
      13 ft. (3.9m) cutting width 10 disc modular cutterbar with crop lifters Cutterbar shock protection system
      HAY CONDITIONER:
      102 in. (2.6m) wide, 10-3/8 in. (.26m) diameter conditioning rolls High speed conditioning rolls (920 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. (.96m) to 96 in. (2.4m)
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303 self-propelled windrowers.
      To avoid running over uncut crop
      during field operation, windrower tractor cannot be equipped with 580/70R26 or 600/65R28 drive tires.
      Not compatible with WDX or WD
      Windrowers equipped with factory or dealer installed draper head adapter kits.
      EX WORKS:
      Wholegoods (Ex Works New Holland, PA)
  • RD162 DISC HEADER [ Versions ]
    • HEADER:
      All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
      HAY CONDITIONER (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Specialty Crop Header does not include
      a conditioner roll module
      CUTTERBED:
      15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
      Specialty Crop Header is less crop
      lifters except on drive module discs
      SPECIALTY CROP HEADER:
      Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner and Specialty Crop
      header versions cannot be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
      HAY CONDITIONER (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Specialty Crop Header does not include
      a conditioner roll module
      CUTTERBED:
      15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
      Specialty Crop Header is less crop
      lifters except on drive module discs
      SPECIALTY CROP HEADER:
      Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner and Specialty Crop
      header versions cannot be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
      HAY CONDITIONER (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Specialty Crop Header does not include
      a conditioner roll module
      CUTTERBED:
      15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
      Specialty Crop Header is less crop
      lifters except on drive module discs
      SPECIALTY CROP HEADER:
      Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner and Specialty Crop
      header versions cannot be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
      HAY CONDITIONER (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Specialty Crop Header does not include
      a conditioner roll module
      CUTTERBED:
      15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
      Specialty Crop Header is less crop
      lifters except on drive module discs
      SPECIALTY CROP HEADER:
      Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner and Specialty Crop
      header versions cannot be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
      HAY CONDITIONER (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Specialty Crop Header does not include
      a conditioner roll module
      CUTTERBED:
      15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
      Specialty Crop Header is less crop
      lifters except on drive module discs
      SPECIALTY CROP HEADER:
      Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner and Specialty Crop
      header versions cannot be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
  • HEADER:
    All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger with 7" deep reinforced flighting High density polyethylene impact resistant hood liner
    HAY CONDITIONER:
    (WHERE APPLICABLE): Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (938 rpm) Windrow and wide swath width adjustable from 38 in. to 96 in.
    Specialty Crop Header does not include
    a conditioner roll module
    FLAIL CONDITIONER:
    (WHERE APPLICABLE): 90 in. rotor with 90 tapered flails Adjustable rotor hood with replaceable smooth liner High Speed Rotor
    CUTTERBED:
    16 ft. cutting width 10 disc modular cutterbar Cutterbar shock protection system
    SPECIALTY CROP HEADER
    Specialty Crop Header only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. crop discharge opening with 83” closure kit Windrow opening top deflector shield Adjustable windrow forming rods 20 in. diameter floating auger with: 7 in deep, tapered, reinforced flighting 33 tooth auger drive sprocket Less rubber auger paddles and paddle mounts
    REQUIREMENTS FOR OPERATION:
    WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
    Windrower drive tire sizes
    recommended: 18.4 x 26 R4, 18.4R26 R1, 580/70R26 R3, 21L x 28 R4, or 600/65R28 R1W
    Less Conditioner and Specialty Crop
    header versions can not be used to merge windrows with a Double Windrow Attachment
    EX WORKS:
    Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
    Note - Hi-contact rolls produced for
    dealer orders submitted by October 12011.
  • RD182 DISC HEADER [ Versions ]
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
      CUTTERBED:
      18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
      CONDITIONING ROLLS (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner header version can
      not be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
      CUTTERBED:
      18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
      CONDITIONING ROLLS (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner header version can
      not be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
      CUTTERBED:
      18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
      CONDITIONING ROLLS (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner header version can
      not be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
    • HEADER:
      Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
      CUTTERBED:
      18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
      CONDITIONING ROLLS (WHERE APPLICABLE):
      Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
      Requirements for Operation:
      WINDROWER REQUIREMENTS: For use with WD2303
      Windrower drive tire sizes
      recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
      Less Conditioner header version can
      not be used to merge windrows with a Double Windrow Attachment
      EX WORKS:
      Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
      Note - Hi-contact rolls produced for
      dealer orders submitted byOctober 1, 2010.
  • HEADER:
    Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
    CUTTERBED:
    19 ft. 4 in. cutting width 12 disc modular cutterbar Cutterbar shock protection system
    CONDITIONING ROLLS (WHERE APPLICABLE):
    Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (938 rpm) Windrow and wide swath width adjustable from 38 in. to 96 in.
    REQUIREMENTS FOR OPERATION:
    WINDROWER REQUIREMENTS: For use with WD2303
    Windrower drive tire sizes
    recommended: 18.4 x 26 R1, 18.4R26 R4, 580/70R26 R3, 21L x 28 R4, or 600/65R28 R1W
    Less Conditioner header version can
    not be used to merge windrows with a Double Windrow Attachment
    EX WORKS:
    Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
    Note - Hi-contact rolls produced for
    dealer orders submitted by October 12011.
IRONBuilder
Select your region:  
**Prices quoted are Manufacturer Suggested Retail Prices. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.