CaseIH IRONBuilder Product Selection

Your Summary

PRECISION AIR™ CARTS

STATUS: NOT COMPLETE

CONFIGURED PRICE:	$ NA USD
ACCESSORIES:	$ NA USD

TOTAL:

$ NA USD

† Taxes, freight, setup and delivery not included.

Standard Features Print Summary Save Configuration

Clear Options | Go To Accessories

1. Select a product

2. Select a model

3. Options

4. Accessories

5. Summary

6. Request a quote

2. Select a model

2230 Air System [ Standard Features ]

TANK SIZE:
230 US bushels (8105 liters) 2 Compartment steel tank Front Compartment - 86 US bu. (3030 liters) Rear Compartment - 144 US bu. (5074 liters)

SEED DELIVERY:
Hydraulic driven single fan Optional: Hydraulic driven dual fan

WHEELS AND TIRES:
Front Axle - dual castor, 16.5L x 16.1 6PR (AWT) tires (Tow-Behind System Only) Rear Axle - 23.1 x 26 10PR AWT single tires @ 120 in. (3.05 m) tracking width

MANIFOLD:
Quick change double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller

METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab.

Optional:
Variable - hydraulically driven mechanism with control from cab

AUGER:
8 in. (20.3 cm) Steel cupped flighting Variable speed control valve Top and bottom control

MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout

TRANSPORT DIMENSIONS:
Ground Clearance: 21 in. (0.53 m) Height: 13 ft. 3 in. (4.0 m) Overall Width: 11 ft. 11 in. (3.6 m) Length Tow-Between (with Auger): 20 ft. 10 in. (6.4 m) Weight Tow-Between (Empty): 8,570 lbs. (3887 kg) Weight Tow-Between (Loaded*): 21,737 lbs. (9860 kg) Length Tow-Behind (with Auger): 18 ft. 11 in. (5.8 m) Weight Tow-Behind (Empty): 8,810 lbs. (3996 kg) Weight Tow-Behind (Loaded*): 21,977 lbs. (9969 kg)

* When loaded with 48 lb./ft.³ of product AIR SYSTEM CAPACITIES:
Field Loads (at front of hitch): Maximum Draft - TBT Cart 30,000 lbs. Maximum draft - TBH Cart 15,000 lbs.

Product Rate:
Maximum rate per primary 2.5 in. (6.4 cm) line 40 lbs./min. (18 kg/min.) @ 5000 fan RPM

AIR SYSTEM CAPACITIES: (continued)
Note: Transport lighting meets ASAE 279.11 standard.

Requirements for Operation:
Do not tow the implement at speeds over 20 mph (32 kmph).

Do not tow a loaded air system while
transporting the implement between fields.

Do not tow more than two implements
behind the tractor while transporting between fields.

The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.

The total towed weight should be
reduced based on tractor condition and road conditions.

Tractor draw bar that can be locked
in a stationary position with an intermediate draw bar chain support

Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights

Closed center or load sensing hydraulic
system for tractor required

One hydraulic control valve for fan
and auger

Requirements for Operation: (continued)
Maximum Case Drain pressure must be less than 25 psi (172 kPa).

Case Drain oil flow:
1 US gpm (3.8 lpm), VR Cart - 3.5 US gpm (13.2 lpm)

Electrical system: capable of 6.5 amp
nominal, 16 amp peak current draw (VR Cart - 3.5 amp nominal/peak)

20 US gpm (75.7 lpm) @
5000 fan RPM hydraulic oil flow

Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives

Typical hydraulic pressure requirement
is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*

* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.

EX WORKS:
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
2280 Air System [ Standard Features ]

TANK SIZE:
Precision Air 2280 280 US bushels (10113 liters) 2 Plastic Tanks Tow-Between Front Tank - 169 US bu. (5955 liters) Rear Tank - 118 US bu. (4158 liters) Tow-Behind Front Tank - 118 US bu. (4158 liters) Rear Tank - 169 US bu. (5955 liters)

Precision Air 2330
330 US bushels (11558 liters) 2 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Rear Tank - 186 US bu. (6554 liters)

SEED DELIVERY:
Hydraulic driven dual fan

WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width

MANIFOLD:
Quick change with double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller

METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base

Optional:
Variable - hydraulically driven mechanism with control from cab

AUGER:
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.

MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout

TRANSPORT DIMENSIONS:
Precision Air 2280 Ground Clearance: 25 in. (0.64 m) Height: 14 ft. 11 in. (4.55 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 26 ft. 4 in. (8 m) Weight Tow-Between (Empty): 10,013 lbs. (4546 kg) Weight Tow-Between (Loaded*): 26,739 lbs. (12129 kg) Length Tow-Behind (w/Auger): 25 ft. 4 in. (7.72 m) Weight Tow-Behind (Empty): 10,013 lbs. (4546 kg) Weight Tow-Behind (Loaded*): 26,739 lbs. (12129 kg) Weight Tow-Between Front Hitch (Loaded): 5,950 lbs. (2699 kg)

Precision Air 2330 Air System Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 26 ft. 4 in. (8 m) Weight Tow-Between (Empty): 10,052 lbs. (4546 kg) Weight Tow-Between (Loaded*): 29,765 lbs. (13501 kg) Length Tow-Behind (w/Auger): 25 ft. 4 in. (7.72 m) Weight Tow-Behind (Empty): 10,052 lbs. (4546 kg) Weight Tow-Behind (Loaded*): 29,765 lbs. (13501 kg) Weight Tow-Between Front Hitch (Loaded): 6,640 lbs. (3012 kg)

* When loaded with 48 lb./ft.³ of product AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM

Transport lighting meets
ASAE 279.11 standard.

Turning radius can be reduced when
a Tow Between Cart is used with a 3 point hitch equipped QUADTRAC. A drawbar extension may be required.

Requirements for Operation:
Do not tow the implement at speeds over 20 mph (32 kmph)

Do not tow a loaded air system while
transporting the implement between fields.

Do not tow more than two implements
behind the tractor while transporting between fields.

The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.

The total towed weight should be
reduced based on tractor condition and road conditions.

When operating a Tow-Between Air
System with a Steiger QUADTRAC use high capacity drawbar in the extended length position.

Category IV tractor drawbar that can
be locked in a stationary position with an intermediate drawbar chain support

Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights

Closed center or load sensing
hydraulic system for tractor required

One hydraulic control valve for fan
and auger

Two hydraulic control valves - one for
fan and meter drive second for auger

1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)

Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)

20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow

Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives

Requirements for Operation: (continued)
Typical hydraulic pressure requirement is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*

* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.

EX WORKS
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
2330 Air System [ Standard Features ]

TANK SIZE:
Precision Air 2280 280 US bushels (10113 liters) 2 Plastic Tanks Tow-Between Front Tank - 169 US bu. (5955 liters) Rear Tank - 118 US bu. (4158 liters) Tow-Behind Front Tank - 118 US bu. (4158 liters) Rear Tank - 169 US bu. (5955 liters)

Precision Air 2330
330 US bushels (11558 liters) 2 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Rear Tank - 186 US bu. (6554 liters)

SEED DELIVERY:
Hydraulic driven dual fan

WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width

MANIFOLD:
Quick change with double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller

METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base

Optional:
Variable - hydraulically driven mechanism with control from cab

AUGER:
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.

MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout

TRANSPORT DIMENSIONS:
Precision Air 2280 Ground Clearance: 25 in. (0.64 m) Height: 14 ft. 11 in. (4.55 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 26 ft. 4 in. (8 m) Weight Tow-Between (Empty): 10,013 lbs. (4546 kg) Weight Tow-Between (Loaded*): 26,739 lbs. (12129 kg) Length Tow-Behind (w/Auger): 25 ft. 4 in. (7.72 m) Weight Tow-Behind (Empty): 10,013 lbs. (4546 kg) Weight Tow-Behind (Loaded*): 26,739 lbs. (12129 kg) Weight Tow-Between Front Hitch (Loaded): 5,950 lbs. (2699 kg)

Precision Air 2330 Air System Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 26 ft. 4 in. (8 m) Weight Tow-Between (Empty): 10,052 lbs. (4546 kg) Weight Tow-Between (Loaded*): 29,765 lbs. (13501 kg) Length Tow-Behind (w/Auger): 25 ft. 4 in. (7.72 m) Weight Tow-Behind (Empty): 10,052 lbs. (4546 kg) Weight Tow-Behind (Loaded*): 29,765 lbs. (13501 kg) Weight Tow-Between Front Hitch (Loaded): 6,640 lbs. (3012 kg)

* When loaded with 48 lb./ft.³ of product AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM

Transport lighting meets
ASAE 279.11 standard.

Turning radius can be reduced when
a Tow Between Cart is used with a 3 point hitch equipped QUADTRAC. A drawbar extension may be required.

Requirements for Operation:
Do not tow the implement at speeds over 20 mph (32 kmph)

Do not tow a loaded air system while
transporting the implement between fields.

Do not tow more than two implements
behind the tractor while transporting between fields.

The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.

The total towed weight should be
reduced based on tractor condition and road conditions.

When operating a Tow-Between Air
System with a Steiger QUADTRAC use high capacity drawbar in the extended length position.

Category IV tractor drawbar that can
be locked in a stationary position with an intermediate drawbar chain support

Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights

Closed center or load sensing
hydraulic system for tractor required

One hydraulic control valve for fan
and auger

Two hydraulic control valves - one for
fan and meter drive second for auger

1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)

Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)

20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow

Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives

Requirements for Operation: (continued)
Typical hydraulic pressure requirement is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*

* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.

EX WORKS
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
3380 Air System [ Standard Features ]

TANK SIZE:
Precision Air 3380 Air System 380 US bushels (13390 liters) 3 Plastic Tanks Tow-Between Front Tank - 169 US bu. (5955 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 118 US bu. (4158 liters) Tow-Behind Front Tank - 118 US bu. (4158 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 169 US bu. (5955 liters)

Precision Air 3430 Air System
430 US bushels (15153 liters) 3 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 186 US bu. (6554 liters)

SEED DELIVERY:
Hydraulic driven dual fan

WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width

MANIFOLD:
Quick change double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller

METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base

Optional:
Variable - hydraulically driven mechanism with control from cab

AUGER:
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.

MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout

TRANSPORT DIMENSIONS:
Precision Air 3380 Air System Ground Clearance: 25 in. (0.64 m) Height: 14 ft. 11 in. (4.55 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 10,880 lbs. (4940 kg) Weight Tow-Between (Loaded*): 33,580 lbs. (15230 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 10,880 lbs. (4940 kg) Weight Tow-Behind (Loaded*): 33,580 lbs. (15230 kg) Weight Tow-Between Front Hitch (Loaded): 7420 lbs. (3370 kg)

Precision Air 3430 Air System Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 11,090 lbs. (5030 kg) Weight Tow-Between (Loaded*): 36,780 lbs. (16680 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 11,090 lbs. (5030 kg) Weight Tow-Behind (Loaded*): 36,780 lbs. (16680 kg) Weight Tow-Between Front Hitch (Loaded): 8,020 lbs. (3640 kg)

* When loaded with 48 lb./ft.³ of product AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM

Transport lighting meets ASAE 279.11
standard.

Turning radius can be reduced when
a Tow-Between Cart is used with a 3 point hitch equipped QUADTRAC. A drawbar extension may be required.

Requirements for Operation:
TRACTOR MONITOR INSTALLATION KIT IS REQUIRED FOR OPERATION (include brackets and harness). See Parts Division for ordering information.

Do not tow the implement at speeds
over 20 mph (32 kmph)

Do not tow a loaded air system while
transporting the implement between fields.

Do not tow more than two implements
behind the tractor while transporting between fields.

The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.

The total towed weight should be
reduced based on tractor condition and road conditions.

When operating a Tow-Between
Air System with a Steiger QUADTRAC use high capacity Drawbar in the extended length position.

Category IV tractor drawbar that can be
locked in a stationary position with an intermediate drawbar chain support.

Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights

Closed center or load sensing
hydraulic system for tractor required

Maximum Case Drain Pressure must
be less than 25 psi (172 kPa)

1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)

Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)

20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow

Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives

Requirements for Operation: (continued)
Typical hydraulic pressure requirement is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*

* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.

EX WORKS:
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)
3430 Air System [ Standard Features ]

TANK SIZE:
Precision Air 3380 Air System 380 US bushels (13390 liters) 3 Plastic Tanks Tow-Between Front Tank - 169 US bu. (5955 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 118 US bu. (4158 liters) Tow-Behind Front Tank - 118 US bu. (4158 liters) Middle Tank - 93 US bu. (3277 liters) Rear Tank - 169 US bu. (5955 liters)

Precision Air 3430 Air System
430 US bushels (15153 liters) 3 Plastic Tanks Tow-Between Front Tank - 186 US bu. (6554 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 142 US bu. (5004 liters) Tow-Behind Front Tank - 142 US bu. (5004 liters) Middle Tank - 102 US bu. (3594 liters) Rear Tank - 186 US bu. (6554 liters)

SEED DELIVERY:
Hydraulic driven dual fan

WHEELS AND TIRES:
Front Axle - dual caster, 22.5 x 16.1 (R3) STII wheel and tire (Tow-Behind Cart only) Rear Axle - 30.5L x 32 12PR AWT single tires @ 120 in. (3.05 m) tracking width

MANIFOLD:
Quick change double shoot valves Maximum of 8 primary 2.5 in. (6.4 cm) lines per meter roller

METER DRIVE:
Mechanical - ground driven mechanism with electric clutch control from cab. Includes 0.500 Sprocket Ratio in base

Optional:
Variable - hydraulically driven mechanism with control from cab

AUGER:
10 in. (25.4 cm) Steel flighting with cupped and double flighted intake.

MONITOR SYSTEM:
ISO 11783 Compliant Monitor/Electronics Cab Mounted AFS Monitor provides: Low-Level bin sensors Fan RPM Ground speed Individual meter roller speed Rate / acre (hectare) readout

TRANSPORT DIMENSIONS:
Precision Air 3380 Air System Ground Clearance: 25 in. (0.64 m) Height: 14 ft. 11 in. (4.55 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 10,880 lbs. (4940 kg) Weight Tow-Between (Loaded*): 33,580 lbs. (15230 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 10,880 lbs. (4940 kg) Weight Tow-Behind (Loaded*): 33,580 lbs. (15230 kg) Weight Tow-Between Front Hitch (Loaded): 7420 lbs. (3370 kg)

Precision Air 3430 Air System Ground Clearance: 25 in. (0.64 m) Height: 15 ft. 3 in. (4.65 m) Overall Width: 12 ft. 8 in. (3.86 m) Length Tow-Between (w/Auger): 29 ft. 3 in. (8.9 m) Weight Tow-Between (Empty): 11,090 lbs. (5030 kg) Weight Tow-Between (Loaded*): 36,780 lbs. (16680 kg) Length Tow-Behind (w/Auger): 28 ft. 3 in. (8.61 m) Weight Tow-Behind (Empty): 11,090 lbs. (5030 kg) Weight Tow-Behind (Loaded*): 36,780 lbs. (16680 kg) Weight Tow-Between Front Hitch (Loaded): 8,020 lbs. (3640 kg)

* When loaded with 48 lb./ft.³ of product AIR SYSTEM CAPACITIES:
Product Rate: Maximum rate per primary 2.5in. (6.4 cm) Line 40 lbs. / min @ 5000 fan RPM

Transport lighting meets ASAE 279.11
standard.

Turning radius can be reduced when
a Tow-Between Cart is used with a 3 point hitch equipped QUADTRAC. A drawbar extension may be required.

Requirements for Operation:
TRACTOR MONITOR INSTALLATION KIT IS REQUIRED FOR OPERATION (include brackets and harness). See Parts Division for ordering information.

Do not tow the implement at speeds
over 20 mph (32 kmph)

Do not tow a loaded air system while
transporting the implement between fields.

Do not tow more than two implements
behind the tractor while transporting between fields.

The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor manufacturer.

The total towed weight should be
reduced based on tractor condition and road conditions.

When operating a Tow-Between
Air System with a Steiger QUADTRAC use high capacity Drawbar in the extended length position.

Category IV tractor drawbar that can be
locked in a stationary position with an intermediate drawbar chain support.

Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights

Closed center or load sensing
hydraulic system for tractor required

Maximum Case Drain Pressure must
be less than 25 psi (172 kPa)

1 US gpm (3.8 lpm) Case Drain oil flow,
VR Cart - 4.8 US gpm (18.1 lpm)

Electrical system capable of 7 amp
nominal, 19 amp peak current draw (VR Cart - 4.0 amp nominal/peak)

20 US gpm (75.7 lpm) @ 5000 fan RPM
hydraulic oil flow

Additional 1.25 US gpm (4.7 lpm) per
meter required for variable rate meter drives

Requirements for Operation: (continued)
Typical hydraulic pressure requirement is 2500 psi (17.2 MPa) but the requirement may increase to 3000 psi (20.7 MPa) with high product rates*

* Minimum requirements are a starting
point only and should be increased based on operating conditions and other implements that are used with the drill. Maximum allowable hydraulic pressure lower than either 3000 psi (20.7 MPa) or factory settings for individual tractors.

EX WORKS:
Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized Fargo, ND) Factory Supplied Attachments (Ex Works Saskatoon, SK)

** Prices quoted are Manufacturer Suggested Retail Prices and are not valid outside of the United States of America. Please see your local dealer for a competitive quote in your local currency. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.