FRAME:
30 ft. (9.1 m) and 40 ft. (12.19 m)
operating width
Two rank stationary toolbar with
rotating sub bars
Three sections with hydraulic wing fold
for transport
ROW UNITS:
Single Disk Openers
LH and RH openers with 22-1/2 in.
(57cm) disk
Tapered roller bearings
Unique grass wrap guard on
blade hub
4-1/2 x 16 in. (11 x 40 cm) offset
gauge wheel
1 x 12 in. (2.5 x 30 cm) press wheel
Hard surfaced scraper
DEPTH CONTROL:
Depth adjustment increments from
1/4 in. to 3-1/2 in.
DOWN PRESSURE:
Three individual row unit pressure
settings plus variable rank down
pressure adjustment
HI-FLOTATION TIRES AND WHEELS:
Standard walking beams on both front
and rear of drill
All tires are stubble rated and include
anti-puncture sealant
30 ft. (9.1 m) width
Wings: 31 x 13.5 x 15 10PR tires
Main Frame: 31 x. 13.5 x 15 10PR
tires
40ft. (12.19 m) width
Wings: 31 x 13.5 x 15 10PR tires
Main Frame: 31 x. 13.5 x 15 14PR
tires
HITCH:
Floating hitch
TRANSPORT DIMENSIONS:
30 ft. (9.1 m) width
Transport Height
7-1/2 in. (19 cm) spacing -
11 ft. 11 in. (3.63 m)
10 in. (25 cm) spacing -
11 ft. 11 in. (3.63 m)
Transport Width
7-1/2 in. (19 cm) spacing -
14 ft. (4.3 m)
10 in. (25 cm) spacing -
14 ft. 6 in. (4.4 m)
Drill Weight
7-1/2 in. (19 cm) spacing -
24,500 (11,113 kg)
10 in. (25 cm) spacing -
22,200 (10,069 kg)
40ft. (12.19 m) width
Transport Height 7-1/2 in. (19 cm) spacing -
15 ft. 8 in. (4.78 m)
10 in. (25 cm) spacing -
15 ft. 8 in. (4.78 m)
15 in. (38 cm) spacing -
15 ft. 8 in. (4.78 m)
Transport Width
7-1/2 in. (19 cm) spacing -
16 ft. 8 in. (5.08 m)
10 in. (25 cm) spacing -
16 ft. 11 in. (5.16 m)
15 in. (38 cm) spacing -
16 ft. 8 in. (5.08 m)
Drill Weight
7-1/2 in. (19 cm) spacing -
31,910 (14,474 kg)
10 in. (25 cm) spacing -
28,600 (12,973 kg)
15 in. (38 cm) spacing -
25,290 (11,472 kg)
RETURNABLE SHIPPING STANDS:
Specific instructions on process of
returning shipping stands are in the
Dealer Operating Guide.
NOTE: Drill meets ASAE 279.11
transport light and marking standards.
Requirements for Operation:
4 PTO hp minimum per opener*
Do not tow the implement at speeds
over 20 mph.
Do not tow a loaded air system while
transporting the implement between fields.
Do not tow more than two implements
behind the tractor while transporting between fields.
The total towed weight should be less
than 1.5 times the maximum operating weight provided by the tractor
manufacturer.
The total towed weight should be
reduced based on tractor condition and road conditions.
Requirements for Operation: (continued)
Minimum hydraulic pressure 2200 psi*
Two hydraulic control valves for wing
folding and row unit lift. An additional hydraulic control valve is required if
markers are installed.
Tractor draw bar that can be locked
in a stationary position with an intermediate draw bar chain support
Tractor equipped with 12-volt electrical
system with a 7 pin auxiliary electric outlet for warning lights
* Minimum requirements are a starting
point only and should be increased based on operating conditions in the
field, road transport conditions and
other implements that are used with
the drill. Maximum allowable hydraulic
pressure lower than either 3000 psi or
factory settings for individual tractors.
EX WORKS:
Wholegoods
(Ex Works Saskatoon, SK)
(Freight Equalized Fargo, ND)
Factory Supplied Attachments
(Ex Works Saskatoon, SK)