HITCH:
Spring cushioned self-leveling with
"Perfect Hitch" tongue for tractor
auto-pin compatibility for
clevis-type tractor drawbar.
FRAME:
Heavy welded tubing and cross-bracing
for durability;
25 ft. size use 6 x 6 in. fore-aft tubes
34 ft. size uses twin fore-aft tubes
(4 x 6 in. and 6 x 6 in.)
42 ft. size uses 6 x 8 in. tubes on
mainframe and 6 x 6 in. tubes on
wings
UNITIZED GANGS (pre-assembled):
25 ft. and 34 ft. size - 5 x 3 in.
rectangular tube gang bars w/bolted
on heavy-duty nodular iron bearing
standards
42 ft. size - 4 x 6 in. rectangular tube
gang bars w/bolted on heavy-duty
nodular iron bearing standards
Cushion Gang Bearing - Precision type
regreasable, triple sealed trunnion
mounted bearing with bushings in a
nodular iron housing.
18° angle front and rear
1-1/2 in. round spring steel arbor bolts
Nodular iron spacing spools with
machined ends
Turbo blades
Diameter: 20 in.
Thickness: .256 in.
Blade Spacing: 7.5 in.
SPOOL SCRAPERS:
Gang to gang scrapers and trunnion
bearing shields
REAR CONDITIONER:
14 inch diameter rolling ACS
flat-bar basket
WHEELS AND TIRES:
25 ft. size
Walking tandem axles with 8-bolt
heavy-duty hubs with replaceable
spindles, with 12.5L x 15 FI
(load range F) tires on MF;
Walking tandem 6-bolt heavy-duty hubs
with replaceable spindles, with
11L x 15 8PR tires on wings
One-way pivoting stabilizer wheels
34 ft. size
Walking tandem axles with 8-bolt heavy-duty hubs with replaceable
spindles, with 12.5L x 15 FI
(load range F) tires on MF and wings
One-way pivoting stabilizer wheels
42 ft. size
Walking tandem axles with 8-bolt heavy-duty hubs with replaceable
spindles, with 16.5 x 16.1 FI (E)
tires on MF;
Walking tandem 6-bolt heavy-duty
hubs with replaceable spindles, with
12.5L x 15 SL 10PR tires on all wings
Adjustable castoring gauge wheels on
outer wings with 9.5L x 15 SL 8PR
tires
HYDRAULICS AND TRANSPORT SYSTEM:
Single point depth adjustment hydraulic
depth control
Hydraulic lift system:
25 ft. machine
4 x 8, 3-3/4 x 8 hydraulic cylinders
34 ft. machine
4-1/4 x 8, 4 x 8 hydraulic cylinders
HYDRAULICS AND TRANSPORT
SYSTEM: (continued) Hydraulic lift system:
42 ft. machine
4-1/4 x 12 in. on main frame
4 x 12 hydraulic cylinders on inner
wings
3-3/4 x 12 hydraulic cylinders on
outer wings and 3-1/2 x 12 in.
hydraulic cylinders, rephasing
cylinders, hoses and fittings
3000 PSI hydraulic cylinders, hoses,
fittings
Male ISO couplers on hydraulic hosed
to tractor
Hydraulic Folding Wings
25 ft. machine
3-1/2 x 42 in. hydraulic cylinders
34 ft. machine
4 x 42 in. hydraulic cylinders
42 ft. machine
4 x 36 hydraulic cylinders rear inner
wings,
3-1/2 x 36 om. cylinders front inner
wings;
4 x 36 in. hydraulic cylinders rear
outer wings
WORKING WIDTHS:
@ 7.5 in.
Nominal Spacing
--------- ------------
25 ft. 24 ft. 7 in.
34 ft 34 ft. 1 in.
42 ft. 42 ft. 5 in.
TRANSPORT WIDTH:
15 ft. 1 in. (4.6 m) on 25 ft. machine
17 ft. 10 in. (5.4 m) on 34 ft. machine
18 ft. 6 in. (5.64 m) on 42 ft. machine
TRANSPORT HEIGHT (W/O REAR REEL):
11 ft. 3 in. (3.4 m) on 25 ft. machine
14 ft. 3 in. (4.3 m) on 34 ft. machine
13 ft. 4 in. (4.06 m) on 42 ft. machine
MISCELLANEOUS:
Front and Rear jack stand
ASAE Highway transport chain
Combination warning and tail lights
with 7-pin connector
SMV emblem and reflectors
Swinging hydraulic hose holder and
operator's manual storage container
Requirements for Operation:
12 volt electrical system and a 7 pin
connector wired to supply power to
transport lighting
Minimum required tractor hydraulic
pressure: 2200 PSI
Up to three hydraulic remote valves
Operating guidelines vary with soil conditions.
Recommended ground speed:
7 - 9 mph
7 - 11 Eng hp/ft. or
6 - 10 PTO hp/ft.
Engine horsepower required for
secondary tillage operations (1.0 - 3.0 in. depth).
25 ft. - 145 - 290 hp
34 ft. - 200 - 395 hp
42 ft. - 245 - 500 hp
Operating Depth - 1.0 - 3.0 in. EX WORKS:
Wholegoods
(Ex Works Goodfield, IL)
Factory Supplied Attachments
(Ex Works Saskatoon, SK)