2. Select a model
3. Options
4. Accessories
5. Summary
6. Request a quote
2. Select a model
- FHX300 Pull-Type Forage Harvester W/ CRP PROC [ Versions ]
- - Single Axle [ Standard Features ]
CUTTERHEAD:
25-1/2 in. wide, 21 in. diameter
cutterhead with 12 knives
1000 rpm, equal angle PTO drive
300 hp capable (250 hp constant,
up to 300 hp intermittent loads)
Hard-faced underbeveled knives
(single edged)
3 in. manual knife sharpener with
traverse bearings
Quick-adjust reversible shear bar
Quick-change cutterhead reversing
system
FEEDROLLS:
Flip up feed rolls
Recutter capability
Easy change length of cut
Quick attachment mounting
Electronic metal detector (includes
standard upper feedroll drive
slip clutch)
Electric clutch for reversing feed rolls
and attachment
Shearbolt protected 11-1/2 in.
transfer auger
Electric control with joystick
BLOWER:
3-paddle blower
PTO attachment drive
Adjustable spout and spout liner
HITCH AND FRAME:
Heavy-duty frame with standard
long tongue
14L x 16.1, 8PR implement tires
(standard axle)
11L x 15-15, 6PR implement tires
(tandem axle)
Hydraulic swing tongue
Heavy-duty jack
Toolbox
Complete brake/flash/turn signal lights
Replaceable crop guides
Highway transport chain
Requirements for Operation:
Dealer supplied hoses from hitch to
tractor are required for operation.
Note: A bolt-on hitch extension
(Parts Division Supplied Accessory
715298006) is required for tractors
that cannot extend the drawbar to
24 inches.
- - Tandem Axle [ Standard Features ]
CUTTERHEAD:
25-1/2 in. wide, 21 in. diameter
cutterhead with 12 knives
1000 rpm, equal angle PTO drive
300 hp capable (250 hp constant,
up to 300 hp intermittent loads)
Hard-faced underbeveled knives
(single edged)
3 in. manual knife sharpener with
traverse bearings
Quick-adjust reversible shear bar
Quick-change cutterhead reversing
system
FEEDROLLS:
Flip up feed rolls
Recutter capability
Easy change length of cut
Quick attachment mounting
Electronic metal detector (includes
standard upper feedroll drive
slip clutch)
Electric clutch for reversing feed rolls
and attachment
Shearbolt protected 11-1/2 in.
transfer auger
Electric control with joystick
BLOWER:
3-paddle blower
PTO attachment drive
Adjustable spout and spout liner
HITCH AND FRAME:
Heavy-duty frame with standard
long tongue
14L x 16.1, 8PR implement tires
(standard axle)
11L x 15-15, 6PR implement tires
(tandem axle)
Hydraulic swing tongue
Heavy-duty jack
Toolbox
Complete brake/flash/turn signal lights
Replaceable crop guides
Highway transport chain
Requirements for Operation:
Dealer supplied hoses from hitch to
tractor are required for operation.
Note: A bolt-on hitch extension
(Parts Division Supplied Accessory
715298006) is required for tractors
that cannot extend the drawbar to
24 inches.
- FHX300 Pull-Type Forage Harvester W/O CRP PROC [ Versions ]
- - Single Axle [ Standard Features ]
CUTTERHEAD:
25-1/2 in. wide, 21 in. diameter
cutterhead with 12 knives
1000 rpm, equal angle PTO drive
300 hp capable (250 hp constant,
up to 300 hp intermittent loads)
Hard-faced underbeveled knives
(single edged)
3 in. manual knife sharpener with
traverse bearings
Quick-adjust reversible shear bar
Quick-change cutterhead reversing
system
FEEDROLLS:
Flip up feed rolls
Recutter capability
Easy change length of cut
Quick attachment mounting
Electronic metal detector (includes
standard upper feedroll drive
slip clutch)
Electric clutch for reversing feed rolls
and attachment
Shearbolt protected 11-1/2 in.
transfer auger
Electric control with joystick
BLOWER:
3-paddle blower
PTO attachment drive
Adjustable spout and spout liner
HITCH AND FRAME:
Heavy-duty frame with standard
long tongue
14L x 16.1, 8PR implement tires
(standard axle)
11L x 15-15, 6PR implement tires
(tandem axle)
Hydraulic swing tongue
Heavy-duty jack
Toolbox
Complete brake/flash/turn signal lights
Replaceable crop guides
Highway transport chain
Requirements for Operation:
Dealer supplied hoses from hitch to
tractor are required for operation.
Note: A bolt-on hitch extension
(Parts Division Supplied Accessory
715298006) is required for tractors
that cannot extend the drawbar to
24 inches.
- - Tandem Axle [ Standard Features ]
CUTTERHEAD:
25-1/2 in. wide, 21 in. diameter
cutterhead with 12 knives
1000 rpm, equal angle PTO drive
300 hp capable (250 hp constant,
up to 300 hp intermittent loads)
Hard-faced underbeveled knives
(single edged)
3 in. manual knife sharpener with
traverse bearings
Quick-adjust reversible shear bar
Quick-change cutterhead reversing
system
FEEDROLLS:
Flip up feed rolls
Recutter capability
Easy change length of cut
Quick attachment mounting
Electronic metal detector (includes
standard upper feedroll drive
slip clutch)
Electric clutch for reversing feed rolls
and attachment
Shearbolt protected 11-1/2 in.
transfer auger
Electric control with joystick
BLOWER:
3-paddle blower
PTO attachment drive
Adjustable spout and spout liner
HITCH AND FRAME:
Heavy-duty frame with standard
long tongue
14L x 16.1, 8PR implement tires
(standard axle)
11L x 15-15, 6PR implement tires
(tandem axle)
Hydraulic swing tongue
Heavy-duty jack
Toolbox
Complete brake/flash/turn signal lights
Replaceable crop guides
Highway transport chain
Requirements for Operation:
Dealer supplied hoses from hitch to
tractor are required for operation.
Note: A bolt-on hitch extension
(Parts Division Supplied Accessory
715298006) is required for tractors
that cannot extend the drawbar to
24 inches.
- HDX10P Windrow Pickup Attaching Unit [ Standard Features ]
GENERAL:
76.5 in./1.9m width (tine-to-tine)
90.5 in./2.3m width (end-to-end)
120 steel tines
Heavy duty windguard
Finger feed auger
(For use with FHX300 pull-type forage
harvester)
- HDX20P Windrow Pickup Attaching Unit [ Standard Features ]
GENERAL:
92 in./2.3m width (tine-to-tine)
105 in./2.7m width (end-to-end)
144 rubber tines
H-D drives
Heavy duty windguard
Finger feed auger
(For use with FHX300 pull-type forage
harvester)
- HDX3R 3 Row Pull Type Header [ Standard Features ]
GENERAL:
3 Row
Row spacing - 28 to 32 in./ 71 to 81cm
PTO shaft driven with slip clutch
protection
Floating points
Adjustable skid shoes
Spring loaded rotary cutoff knives
R & LH Power dividers
Stalk deflectors
Additional header flotation spring
(For use with FHX300 pull-type forage
harvester)
** Prices quoted are Manufacturer Suggested Retail Prices and are not valid outside of the United States of America.
Please see your local dealer for a competitive quote in your local currency. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in
values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.