CaseIH IRONBuilder Product Selection

Your Summary

WINDROWERS & HEADERS

STATUS: NOT COMPLETE

CONFIGURED PRICE:	$ NA USD
ACCESSORIES:	$ NA USD

TOTAL:

$ NA USD

† Taxes, freight, setup and delivery not included.

Standard Features Print Summary Save Configuration

Clear Options | Go To Accessories

1. Select a product

2. Select a model

3. Options

4. Accessories

5. Summary

6. Request a quote

2. Select a model

DH252 Draper Header [ Versions ]
- - Double Knife/Double Swath [ Standard Features ]
  
  DH252:
  25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
  
  KNIFE DRIVE:
  Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
  
  CUTTING SYSTEM:
  Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
  
  Double Sickle:
  Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
  
  DRAPER BELTS:
  42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
  
  REEL:
  UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
  
  OTHER EQUIPMENT:
  Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
  
  Requirements for Operation:
  See Chart in Appendix for details to adapt DH draper headers.
  
  A draper head adapter kit is required to
  attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
- - Single Knife/Double Swath [ Standard Features ]
  
  DH252:
  25 ft. (7.6m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m)
  
  KNIFE DRIVE:
  Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
  
  CUTTING SYSTEM:
  Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
  
  Double Sickle:
  Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
  
  DRAPER BELTS:
  42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
  
  REEL:
  UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
  
  OTHER EQUIPMENT:
  Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
  
  Requirements for Operation:
  See Chart in Appendix for details to adapt DH draper headers.
  
  A draper head adapter kit is required to
  attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
DH302 Draper Header [ Versions ]
- - Single Knife/Double Swath [ Standard Features ]
  
  DH302:
  30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
  
  KNIFE DRIVE:
  Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
  
  CUTTING SYSTEM:
  Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
  
  Double Sickle:
  Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
  
  DRAPER BELTS:
  42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
  
  REEL:
  UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
  
  OTHER EQUIPMENT:
  Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
  
  Requirements for Operation:
  See Chart in Appendix for details to adapt DH draper headers.
  
  A draper head adapter kit is required to
  attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
- - Double Knife/ Double Swath [ Standard Features ]
  
  DH302:
  30 ft. (9.1m) cutting width Single or double knife Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 50 in. (1.27m) Castoring Gauge Wheels
  
  KNIFE DRIVE:
  Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)
  
  CUTTING SYSTEM:
  Single Sickle: Schumacher EasyCut system with spring steel guards, bolt-on plated knife sections, and Rollerguide knifeback guide system
  
  Double Sickle:
  Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)
  
  DRAPER BELTS:
  42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute
  
  REEL:
  UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization
  
  OTHER EQUIPMENT:
  Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard
  
  Requirements for Operation:
  See Chart in Appendix for details to adapt DH draper headers.
  
  A draper head adapter kit is required to
  attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
DH362 Draper Header:-Double Knife / Double Swath [ Standard Features ]

DH362:
36 ft. (11m) cutting width Double knife only Center delivery opening - 80 in. (2.03m) Double swath center opening - 56 in. (1.42m) Double swath side opening - 48 in. (1.22m) Castoring Gauge Wheels

KNIFE DRIVE:
Schumacher ProDrive knife drive system, hydraulically driven using windrower hydraulic system 1400 strokes per minute Knife stroke - 3.31 in. (.84m)

CUTTING SYSTEM:
Double Sickle: Choice of: Schumacher EasyCut system with spring steel guards and bolt-on plated knife sections and Rollerguide knifeback guide system or Case IH forged steel guards, adjustable hold-down clips and bolted knife sections. (recommended for green feed cutting conditions)

DRAPER BELTS:
42 inch rubberized polyester, with fiberglass reinforced tie bar connections Moulded V-Guide belt tracking Draper speed in-cab adjustable flow control from 0 to 705 ft./minute

REEL:
UII reels with end-tine package Direct drive hydraulic drive with 45 cu. in. (.74L) motor Reel shipped fully assembled Reel speed 20 to 48 rpm Hydraulic reel lift In-cab controlled auto reel-speed to ground-speed synchronization

OTHER EQUIPMENT:
Slow Speed Transport, with Tires/Wheels and Tongue Hay Guard

Requirements for Operation:
See Chart in Appendix for details to adapt DH draper headers.

A draper head adapter kit is required to
attach the head to a windrower. Order adapter kits one of two ways: 1) factory installed on the windrower; or 2) through the Parts Division Supplied Accessories to be dealer installed.
HDX142 Sicklebar Header for Mower Conditioner [ Versions ]
- - Hi-contact [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Rubber on rubber chevron [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Steel on steel spiral [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  14 ft. 3 in. (4.34m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX142 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
HDX162 Sicklebar Header for Mower Conditioner [ Versions ]
- - Hi-contact [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submittedby October 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Rubber on rubber chevron [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submittedby October 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Steel on steel spiral [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  16 ft. 3 in. (4.95m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX162 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submittedby October 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303)
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
HDX182 Sicklebar Header for Mower Conditioner [ Versions ]
- - Hi-contact [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Rubber on rubber chevron [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
- - Steel on steel spiral [ Standard Features ]
  
  ALSO USED WITH:
  WD1203 SP Windrower WD1903 SP Windrower WD2303 SP Windrower
  
  CHASSIS:
  18 ft. 3 in. (5.56m) cutting width Dual mechanically driven counterstroking sickles with heavy-duty wobbles 20 in./.5m diameter floating auger with 5 in./.12m deep flighting Auger slip clutch 100% bolted, thick (.120) overserrated knife sections Bolt adjustable knife hold down clips (4) adjustable skid shoes Cutterbar wearplate Storage area for (2) complete knife assemblies Low profile floor pan
  
  HEADER DRIVE:
  Hydraulically driven header Less header drive motor
  
  REEL:
  Mechanically driven, adjustable speed 5-bat reel Fore/Aft and vertically adjustable reel Segmented tine bars with bearings and bushings
  
  HAY CONDITIONER:
  Gearbox driven 102 in/2.6m wide, 10-3/8 in./.26m diameter conditioner rolls Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in./.96m to 96 in./2.4m
  
  Requirements for Operation:
  If using the HDX182 sicklebar header with a WD---3 windrower, a sickle header adapter kit is required.
  
  For use with SC101 Pivot Tongue for
  Mower Conditioner
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
  
  This can be ordered with the
  Windrower (code 716965)OR This can be ordered as a Parts Division Supplied Accessory (716965046 for WD1203 or 716965036 for WD1903/2303).
  
  For use with WD Series SP Windrowers
  Note - Hi-contact rolls produced fordealer orders submitted by October 1, 2010.
RD132 DISC HEADER [ Versions ]
- - Rubber on rubber chevron - Disc Header/rubber chevron - North America Version - 13 F [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers High density polyethylene impact resistant hood liner Compatible with hydraulic flotation on WD1903 and WD2303 Windrowers
  
  CUTTERBED:
  13 ft. (3.9m) cutting width 10 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  HAY CONDITIONER:
  102 in. (2.6m) wide, 10-3/8 in. (.26m) diameter conditioning rolls High speed conditioning rolls (920 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. (.96m) to 96 in. (2.4m)
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303 self-propelled windrowers.
  
  To avoid running over uncut crop during
  field operation, windrower tractor cannot be equipped with 23.1 x 26 drive tires.
  
  Not compatible with WDX or WD
  Windrowers equipped with factory or dealer installed draper head adapter kits.
  
  EX WORKS:
  Wholegoods (Ex Works New Holland, PA)
- - Steel on steel spiral - Disc Header/steel spiral - North America Version - 13 Ft. Cu [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers High density polyethylene impact resistant hood liner Compatible with hydraulic flotation on WD1903 and WD2303 Windrowers
  
  CUTTERBED:
  13 ft. (3.9m) cutting width 10 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  HAY CONDITIONER:
  102 in. (2.6m) wide, 10-3/8 in. (.26m) diameter conditioning rolls High speed conditioning rolls (920 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. (.96m) to 96 in. (2.4m)
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303 self-propelled windrowers.
  
  To avoid running over uncut crop during
  field operation, windrower tractor cannot be equipped with 23.1 x 26 drive tires.
  
  Not compatible with WDX or WD
  Windrowers equipped with factory or dealer installed draper head adapter kits.
  
  EX WORKS:
  Wholegoods (Ex Works New Holland, PA)
RD162 DISC HEADER [ Versions ]
- - Hi-contact - Disc Header hi-contact - North America Version - 15 Ft 5 In. Cut Width [ Standard Features ]
  
  HEADER:
  All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
  
  HAY CONDITIONER (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Specialty Crop Header does not include
  a conditioner roll module
  
  CUTTERBED:
  15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  Specialty Crop Header is less crop
  lifters except on drive module discs
  
  SPECIALTY CROP HEADER:
  Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner and Specialty Crop
  header versions can not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Less Conditioner - Disc Header - Less Cond - Global - 15 Ft 5 In. Cut Width [ Standard Features ]
  
  HEADER:
  All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
  
  HAY CONDITIONER (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Specialty Crop Header does not include
  a conditioner roll module
  
  CUTTERBED:
  15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  Specialty Crop Header is less crop
  lifters except on drive module discs
  
  SPECIALTY CROP HEADER:
  Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner and Specialty Crop
  header versions can not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Less Conditioner - Disc Header Specialty Crops - North America Version - 15 Ft 5 In. [ Standard Features ]
  
  HEADER:
  All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
  
  HAY CONDITIONER (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Specialty Crop Header does not include
  a conditioner roll module
  
  CUTTERBED:
  15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  Specialty Crop Header is less crop
  lifters except on drive module discs
  
  SPECIALTY CROP HEADER:
  Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner and Specialty Crop
  header versions can not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Rubber on rubber chevron - Disc Header rubber chevron - North America Version - 15 F [ Standard Features ]
  
  HEADER:
  All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
  
  HAY CONDITIONER (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Specialty Crop Header does not include
  a conditioner roll module
  
  CUTTERBED:
  15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  Specialty Crop Header is less crop
  lifters except on drive module discs
  
  SPECIALTY CROP HEADER:
  Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner and Specialty Crop
  header versions can not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Steel on steel spiral - Disc Header - steel spiral - North America Version - 15 Ft 5 [ Standard Features ]
  
  HEADER:
  All Headers: Hydrostatically driven header with dual hydraulic header drive motors hoses and quick couplers 20 in. diameter floating auger High density polyethylene impact resistant hood liner
  
  HAY CONDITIONER (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Specialty Crop Header does not include
  a conditioner roll module
  
  CUTTERBED:
  15 ft. 5 in. cutting width 12 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  Specialty Crop Header is less crop
  lifters except on drive module discs
  
  SPECIALTY CROP HEADER:
  Specialty Crop Header Only: For use in grass seed, mint, or other fragile crop harvest applications only 100 in. Crop Discharge Opening Windrow Opening Top Deflector Shield Adjustable Windrow Forming Rods 20 in. diameter floating auger with: 7 in. deep, tapered, reinforced flighting 33 Tooth Auger Drive Sprocket Less Rubber Auger Paddles and Paddle Mounts
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD1903 or WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner and Specialty Crop
  header versions can not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
RD182 DISC HEADER [ Versions ]
- - Hi-contact - Disc Header - hi-contact - North America Version - 18 Ft. Cut Width [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
  
  CUTTERBED:
  18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  CONDITIONING ROLLS (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner header version can
  not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Less Conditioner - Disc Header - Less Cond. - Global - 18 Ft. Cut Width [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
  
  CUTTERBED:
  18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  CONDITIONING ROLLS (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner header version can
  not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Rubber on rubber chevron - Disc Header-Rubber chevron - North America Version - 18 F [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
  
  CUTTERBED:
  18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  CONDITIONING ROLLS (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner header version can
  not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
- - Steel on steel spiral - Disc Header - Steel Spiral - North America Version - 18 Ft. [ Standard Features ]
  
  HEADER:
  Hydrostatically driven header with dual hydraulic header drive motors, hoses and quick couplers Full length 20 in. diameter floating auger with 7-inch deep reinforced flighting High density polyethylene impact resistant hood liner
  
  CUTTERBED:
  18 ft. cutting width 14 disc modular cutterbar with crop lifters Cutterbar shock protection system
  
  CONDITIONING ROLLS (WHERE APPLICABLE):
  Removable conditioning roll module 102 in. wide, 10-3/8 in. diameter conditioning rolls High speed conditioning rolls (923 rpm) Rubber-on-rubber or steel-on-steel roll configuration Intermeshing chevron roll pattern Windrow and wide swath width adjustable from 38 in. to 96 in.
  
  Requirements for Operation:
  WINDROWER REQUIREMENTS: For use with WD2303
  
  Windrower drive tire sizes
  recommended: 18.4 x 26, 18.4R26, 23.1x 26 or 21L x 28
  
  Less Conditioner header version can
  not be used to merge windrows with a Double Windrow Attachment
  
  EX WORKS:
  Wholegoods (Ex Works Grand Island, NE) Factory Supplied Attachments (Ex Works Grand Island, NE)
  
  Note - Hi-contact rolls produced for
  dealer orders submitted byOctober 1, 2010.
WD1203 Self Propelled Windrower [ Standard Features ]

ENGINE:
WD1203 @126 hp (94kW*) 274 CID (4.5L) 4-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Mechanically controlled fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Rotary Wand radiator screen cleaner 150 amp alternator (1) 12-volt 925 CCA low maintenance battery

* Manufacturer's rating per ECE R120 / ISO 14396 TRANSMISSION:
Two-speed range Hydrostatic

CHASSIS:
Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14L x 16.1 8PR rear tires Hydraulic header drive Header power reverser (in-cab control) Hydraulic header flotation (in-cab adjustable) Hydraulic header tilt (in-cab control) Single lever header transport lock system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shields (on non-draper windrowers only) Less header drive motor and hoses

LIGHTING:
(2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle

OPERATOR CAB:
Deluxe Cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Air-conditioner and heater with manual temperature control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Delco AM/FM Weather Band Radio with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communications) port locations with DIN mounting slots Business band antenna ready (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet Electronic Service Tool diagnostic port CONTROLS AND INSTRUMENTATION: Low-effort ground speed/forward- neutral-reverse control Multi Function Propulsion Lever (right hand console mounted) with push button controls for: Header raise/lower Header tilt control Monitor display selection Draper headers only: Reel raise/lower, Reel fore/aft, Header cut height Header engagement/reverser controls Header flotation adjustment Park brake control Horn

CONTROLS AND INSTRUMENTATION:
(continued) Adjustable, console mounted, 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.

PURCHASED PROTECTION:
The Case IH Protection Plan (CPP) is available for this model.

Requirements for Operation:
See Chart in Appendix for details to
WD1903 Self Propelled Windrower [ Standard Features ]

ENGINE:
WD1903 @190 hp (142kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries

* Manufacturer's rating per ECE R120 / ISO 14396
**TopSpin™ is a registered trademark of the Donaldson Company, Inc.

TRANSMISSION:
Two-speed range Hydrostatic

CHASSIS:
Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14Lx16.1 8PR rear tires Variable speed hydrostatic header drive Header power reverser (in-cab control) Deluxe hydraulic header flotation (flotation weight at each end of header independently controlled from cab) Hydraulic header tilt (in-cab control) with deluxe indicator Single lever header transport lock system Header lift arm quick latch system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shields (on non-draper windrowers only) Less header drive motor and hoses

LIGHTING:
(2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle

OPERATOR CAB:
Deluxe Cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Air-conditioner and heater with manual temp control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Delco AM/FM Weather Band Radio with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communication) port locations with DIN mounting slots Business band antenna ready Windshield wiper/washer (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet EST (Electronic Service Tool) diagnostic port

CONTROLS AND INSTRUMENTATION:
(continued) Header flotation adjustment Park brake control Horn Adjustable console mounted 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level, and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.

PURCHASED PROTECTION:
The Case IH Protection Plan (CPP) is available for this model.

Requirements for Operation:
See Chart in Appendix for details to adapt DHX draper headers
WD2303 Self Propelled Windrower [ Standard Features ]

ENGINE:
WX2303 @226 hp (169kW*) 411 CID (6.7L) 6-cylinder, turbocharged diesel engine with air-to-air intercooler (meets Tier 3 emissions standards) Electronically controlled high pressure common rail fuel injection system Exhaust aspirated air cleaner Engine exhaust muffler Above engine hood Donaldson TopSpin™ pre-cleaner** Rotary Wand radiator screen cleaner 150 amp alternator (2) 12-volt 650 CCA low maintenance batteries

* Manufacturer's rating per ECE R120 / ISO 14396
** TopSpin™ is a registered trademark of the Donaldson Company, Inc.

TRANSMISSION:
Two-speed range Hydrostatic

CHASSIS:
Heavy-duty, double reduction planetary final drives Park brake (console switch controlled) - spring applied and hydraulically released Heavy-duty adjustable rear axle with 14Lx16.1 8PR rear tires Variable speed hydrostatic header drive Header power reverser (in-cab control) Deluxe hydraulic header flotation (flotation weight at each end of header independently controlled from cab) Hydraulic header tilt (in-cab control) with deluxe indicator Single lever header transport lock system Header lift arm quick latch system 120-gallon (454L) fuel tank (ground level access) Lockable storage compartment Hydraulic couplers for header drive motor attachment Manual adjust hay windrow shield (on non-draper windrowers only) Less header drive motor and hoses

LIGHTING:
(2) halogen, cab roof mounted roading lights (4) halogen, cab roof mounted work lights (2) halogen, rear facing work lights (2) halogen, stubble lights Tail lights, turn signals and flashers Time delay cab exit light Service light receptacle

OPERATOR CAB:
Deluxe cab, Cab Suspension Curved tinted glass with left-hand door entry Adjustable tilt/telescopic steering column Fore/aft adjustable right hand control console (moves with seat) Deluxe fabric covered air-suspension operator's seat with fore/aft isolator, lumbar and ride-dampener adjustment and retractable seat belt Operator's seat switch protection system Instructor's seat with seat belt (folds away) Beverage cup holder, lighter and ashtray Air-conditioner and heater with manual temp control Dual cab air filtration system: (1) fresh air external filter and (1) in-cab re-circulation filter (1) center dome light, (1) right-hand console light Radio-ready with AM/FM antenna, (2) speakers and DIN mounting slot (2) additional radio (communication) port locations with DIN mounting slots Business band antenna ready Windshield wiper/washer (2) outside mirror mounting locations and (1) in-cab rearview mirror (1) 12-volt auxiliary power outlet EST (Electronic Service Tool) diagnostic port

CONTROLS AND INSTRUMENTATION:
(continued) Header flotation adjustment Park brake control Horn Adjustable console mounted 4-line display performance monitor: Major functions monitored are: engine oil pressure, engine coolant temperature, engine RPM, battery voltage, ground speed, fuel level, and engine/header hours. Includes engine shut-down protection feature if engine oil pressure is low, engine temperature is high, or transmission charge pressure is low.

PURCHASED PROTECTION:
The Case IH Protection Plan (CPP) is available for this model.

Requirements for Operation:
See Chart in Appendix for details to adapt DHX draper headers

** Prices quoted are Manufacturer Suggested Retail Prices and are not valid outside of the United States of America. Please see your local dealer for a competitive quote in your local currency. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.