2. Select a model
3. Options
4. Accessories
5. Summary
6. Request a quote
2. Select a model
- 2142 Grain Draper Header [ Versions ]
- - 30 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system
Single point / single lever header
hydraulic coupler
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
19 oz. rubber coated polyester with
V-guide tracking
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Single Span PU reel, 5 Bat 31.5in.
(800 mm) tine tip radius with cammed
tine control. Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD ONLY)
Knife - Coarse serrated bolt-on
sections, and double heat-treated
forged guards or case hardened stub
guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3 in.(76 mm) stroke,
1050 - 1300 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Quick detach round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178 mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2142 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - 35 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system
Single point / single lever header
hydraulic coupler
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
19 oz. rubber coated polyester with
V-guide tracking
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Single Span PU reel, 5 Bat 31.5in.
(800 mm) tine tip radius with cammed
tine control. Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD ONLY)
Knife - Coarse serrated bolt-on
sections, and double heat-treated
forged guards or case hardened stub
guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3 in.(76 mm) stroke,
1050 - 1300 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Quick detach round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178 mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2142 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- 2152 Grain Draper Header [ Versions ]
- - Double Knife - 5 Bat Plastic Fingers - 40 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Double Knife - 5 Bat Plastic Fingers - 45 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 5 Bat Plastic Fingers - 40 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 6 Bat HD Plastic Fingers - 25 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 6 Bat HD Plastic Fingers - 30 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 6 Bat Plastic Fingers - 35 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 9 Bat Plastic Fingers - 25 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system for
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler for
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm)
24 oz. rubber skim coated polyester
with V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual or single span PU reel,
5, 6, 9 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box (SKD and DKD)
Knife - Coarse or Fine serrated bolt-on
sections, and double heat-treated
forged guards or case hardened
stub guards with sheet metal top guard
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Mechanical top link to adjust
header angle
Poly cutterbar skid sections cover
entire cutterbar length
Standard - 25 ft., 30 ft., 35 ft. and
40 ft. (double knife)
Optional - 40 (single knife) and 45 ft.
Adjustable skid shoes with
poly -Standard or Optional depending
on configuration
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2152 RIGID DRAPER
HEADER CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- 2162 Grain Draper Header [ Versions ]
- - Double Knife - 5 Bat Plastic Fingers - 40 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system on
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler on
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm) 24 oz.
rubber skim coated polyester with
V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual span PU reel,
5 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box
Knife - Coarse serrated bolt-on
sections and double heat-treated
forged guards
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Hydraulic center link - In-cab control to
adjust header angle
Auto header height control with
visual float and angle indicators
Poly cutterbar skid sections cover
entire cutterbar length
Adjustable inboard and outboard skid
shoes with poly Flex-frame balanced
header lateral flotation system
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2162 DRAPER HEADER
CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 5 Bat Plastic Fingers - 30 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system on
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler on
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm) 24 oz.
rubber skim coated polyester with
V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual span PU reel,
5 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box
Knife - Coarse serrated bolt-on
sections and double heat-treated
forged guards
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Hydraulic center link - In-cab control to
adjust header angle
Auto header height control with
visual float and angle indicators
Poly cutterbar skid sections cover
entire cutterbar length
Adjustable inboard and outboard skid
shoes with poly Flex-frame balanced
header lateral flotation system
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2162 DRAPER HEADER
CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 5 Bat Plastic Fingers - 35 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system on
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler on
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm) 24 oz.
rubber skim coated polyester with
V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual span PU reel,
5 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box
Knife - Coarse serrated bolt-on
sections and double heat-treated
forged guards
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Hydraulic center link - In-cab control to
adjust header angle
Auto header height control with
visual float and angle indicators
Poly cutterbar skid sections cover
entire cutterbar length
Adjustable inboard and outboard skid
shoes with poly Flex-frame balanced
header lateral flotation system
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2162 DRAPER HEADER
CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
- - Single Knife - 5 Bat Plastic Fingers - 40 ft. [ Standard Features ]
STANDARD FEATURES:
Single Lever, quick attach header
latching system on
88 and 20 Series Combines
Single point / single lever header
hydraulic coupler on
88 and 20 Series Combines
Amber transport lights (2) with
single point electrical connector
Drapers - 41.6 in. (1057 mm) 24 oz.
rubber skim coated polyester with
V-guide tracking and
integral seal on leading edge
Hydraulic header draper drive
adjustable speed:
0 - 464 ft./min (141 m/min.)
Adjustable guard angle 2 - 7.4°
Hydraulic reel drive adjustable from cab
Heavy-duty dual span PU reel,
5 Bat 31.5 in. (800 mm) tine tip
radius with cammed tine control.
Plastic tines
Hydraulic reel raise and fore / aft control
Knife drive - heavy-duty hydraulic
oil bath wobble box
Knife - Coarse serrated bolt-on
sections and double heat-treated
forged guards
Knife drive - "C" section belt to
wobble box 3in. (76 mm) stroke,
1050 - 1400 strokes/min.
Telescoping knife driveline w/ 60° free
rotation coupler for easy hook-up
Spare knife storage
Hydraulic center link - In-cab control to
adjust header angle
Auto header height control with
visual float and angle indicators
Poly cutterbar skid sections cover
entire cutterbar length
Adjustable inboard and outboard skid
shoes with poly Flex-frame balanced
header lateral flotation system
Quick Detach Round bar crop dividers
MOUNTING ADAPTER:
Low friction dual coil spring header
flotation system
Drive line from left side of feeder
Feed conveyor - 78.7 in. (2000 mm)
rubber coated polyester with
V-guide tracking
Maximum feed conveyor drive speed:
400 ft./min. (122 m/min.)
Feeder conveyor and auger reverse with
combine feeder reverser system
Hydraulically driven feed conveyor
Mechanically driven feed auger with slip
clutch (floating) and retaining springs
- 65.3 in. (1660 mm) wide
- 22 in. (559 mm) outside diameter
- Max speed 150 rpm
Oil bath gearbox chaincase
Header flotation - Up to 7 in. (178mm)
vertical and 4.8° lateral flotation
Hinged poly feed draper pan (trap door)
Fully intregrated hydraulic and
reservoir system to power the knife
drive, feed draper and side draper
hydraulic motors
Requirements for Operation:
THE MODEL 2162 DRAPER HEADER
CAN ONLY BE ORDERED
DURING THE FOLLOWING
ORDER WRITING PERIOD:
ORDERING PERIOD:
JUNE - NOVEMBER 2009
** Prices quoted are Manufacturer Suggested Retail Prices and are not valid outside of the United States of America.
Please see your local dealer for a competitive quote in your local currency. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in
values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.