2. Select a model

• 1210 Rigid Mounted [ Versions ]
  • - 30 in. - 6 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 30 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 36 in. - 6 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 36 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 38 in. - 6 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 38 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 40 in. - 6 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 40 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines -11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar

    DRIVE:
    

    Ground drive system with 136 speed combination transmission.

    DRIVE AND CARRYING WHEELS:
    

    Two 7.60-15SL, 10 PR Tires

    HITCH:
    

    3 Point type, Cat III or lllN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 9 ft. 10 in. (3.0 m) 6 RW - 9 ft. 4 in. (2.84 m) 8 RN - 9 ft. 4 in. (2.84 m) 8 RW - 11 ft. 4 in. (3.48 m)

    Transport width w/markers
    

    6 RN, 30 in. spacing - 19 ft. 4 in. (5.89 m) 6 RW, 36 in. spacing - 20 ft. 11 in. (6.38 m) 6 RW, 38 in. spacing - 21 ft. 9 in. (6.63 m) 6 RW, 40 in. spacing - 22 ft. (6.71 m) 8 RN, 30 in. spacing - 24 ft. 4 in. (7.42 m) 8 RW, 36 in. spacing - 26 ft. 11 in. (8.2 m) 8 RW, 38 in. spacing - 28 ft. 1 in. (8.6 m) 8 RW, 40 in. spacing - 28 ft. 8 in. (8.74 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    attachment(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 6 R - 80 PTO hp 75 PTO hp w/assist wheels

    Horsepower 8 R - 105 PTO hp
    

    100 PTO hp w/assist wheels

    Must have one remote valve for
    

    vacuum fan and one remote valve for markers (float recommended). A third remote valve is required if optional lift assist wheels are installed.

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractors case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket
    

    Three point hitch

    If Mounted ASM planter is used with
    

    a 6100 Caddy Cart, please order 352457A1, Wiring Harness Extension Kit through Parts Division.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
• 1220 Rigid Trailing [ Versions ]
  • - 6 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines - 11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar Hydraulic lift system: Special double acting Master-slave hydraulic wheel cylinders with rephasing valve

    DRIVE:
    

    Ground drive system with 136 speed combination transmission or hydraulic drive.

    DRIVE AND CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 15 in. w/7.60 x 15 10PR tires

    HITCH:
    

    Heavy-duty with screw type jack vertical hitch adjustment. 2,000 lb. (907 kg) capacity Clevis type with hole for 7/8 in. pin

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 11 ft. 2 in. (3.40 m) 8 RN - 9 ft. 5 in. (2.87 m) Transport width w/markers 6 RN - 17 ft. 3 in. (5.26 m) 8 RN - 25 ft. (7.62 m)

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for lift/drive/carrying wheels and markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kits(s) from Factory Supplied Accessories or the Parts Division.

    When AFS monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower: 6 R - 75 PTO hp, 6 R - 85 PTO hp w/fertilizer system, 8 R - 100 PTO hp, 8 R - 110 PTO hp w/fertilizer

    Must have two remote valves.
    

    If tractor has one valve, or less than 16 gpm flow at the remotes, a PTO pump is required. Order from Factory Supplied Accessories (for non-hydraulic drive planters only).

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 6 R machines - 11.4 bu. total For 8 R machines - 15.2 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar Hydraulic lift system: Special double acting Master-slave hydraulic wheel cylinders with rephasing valve

    DRIVE:
    

    Ground drive system with 136 speed combination transmission or hydraulic drive.

    DRIVE AND CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 15 in. w/7.60 x 15 10PR tires

    HITCH:
    

    Heavy-duty with screw type jack vertical hitch adjustment. 2,000 lb. (907 kg) capacity Clevis type with hole for 7/8 in. pin

    TRANSPORT DIMENSION:
    

    Transport height w/markers 6 RN - 11 ft. 2 in. (3.40 m) 8 RN - 9 ft. 5 in. (2.87 m) Transport width w/markers 6 RN - 17 ft. 3 in. (5.26 m) 8 RN - 25 ft. (7.62 m)

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for lift/drive/carrying wheels and markers if ordered.

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kits(s) from Factory Supplied Accessories or the Parts Division.

    When AFS monitor system is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower: 6 R - 75 PTO hp, 6 R - 85 PTO hp w/fertilizer system, 8 R - 100 PTO hp, 8 R - 110 PTO hp w/fertilizer

    Must have two remote valves.
    

    If tractor has one valve, or less than 16 gpm flow at the remotes, a PTO pump is required. Order from Factory Supplied Accessories (for non-hydraulic drive planters only).

    Requirements for Operation: (continued)
    

    Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum

    7 pin connector socket EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
• 1230 Mounted Stacker [ Versions ]
  • - 30 in. - 12 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 30 in. - 16 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 36 in. - 12 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 38 in. - 12 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 38 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 40 in. - 12 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - 40 in. - 8 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 8 R machines -15.2 bu. total For 12 R machines - 22.8 bu total For 16 R machines - 30.4 bu total

    SEED METERING:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. Vacuum gauge for visual air check is standard. SEED DISCS REQUIRED FOR OPERATION

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    7 x 7 in. main toolbar. Three sections. Wings hydraulically fold for transport.

    DRIVE:
    

    Ground drive system with 136 speed combination transmission and one wheel speed sensor. Not variable rate.

    DRIVE AND CARRYING WHEELS:
    

    Four 7.60-15SL, 10PR Tires Can easily be adjusted forward or backward Lift Assist standard on 16 RN

    HITCH:
    

    3 Point type, Cat III or Cat IVN. When using lift assist wheels, quick hitch must be used.

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for fan One 3/8 in. ISO coupler for fan case drain Two standard ISO male couplers for frame fold and markers if ordered

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    TRANSPORT DIMENSIONS:
    

    Transport height w/markers 8 RW, 38 or 40 in. row spacing - 11 ft. 11in. (3.6 m) 12 RN, 30 in. row spacing - 12 ft. 11 in. (3.94 m) 12 RW, 36 or 38 in. row spacing - 13 ft. (3.96 m) 12 RW, 40 in. row spacing - 13 ft. 9 in. (4.19 m) 16 RN, 30 in. row spacing - 13 ft. 9 in. (4.19 m)

    Transport width w/markers 8 RW, 38 or 40 in. row spacing - 19 ft. 4 in. (5.9 m) 12 RN, 30 in. row spacing - 21 ft. 5 in. (6.53 m) 12 RW, 36 or 38 in. row spacing - 26 ft. 4 in. (8 m) 12 RW, 40 in. row spacing - 26 ft. 10 in. (8.18 m) 16 RN, 30 in row spacing - 26 ft. 10 in. (8.18 m)

    ASSEMBLY:
    

    Planters come assembled as allowed by transportation constraints. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    SEED DISCS. See Factory Supplied Accessories.

    CASE DRAIN KIT. Order appropriate
    

    kit(s) from Factory Supplied Accessories or the Parts Division.

    When AFS Monitor System is used
    

    Tractor Installation Kit is required. Order appropriate kit from Factory Supplied Accessories.

    Tractor Requirements:
    

    Horsepower 8 RW - 150 PTO hp. (with front weights), 12 RN - 200 PTO hp. (with front weights), 155 PTO hp with assist wheels. 12 RW - 205 PTO hp. (with front weights), 160 PTO hp with assist wheels. 16 RN - 185 PTO hp with assist wheels. Requirements for Operation: (continued) Tractor Requirements: Radar (true ground speed sensor) or GPS speed input is required for operation with a hydraulic drive option.

    Must have one remote valve for
    

    vacuum fan and one remote valve for wing fold/markers. A third remove valve is required if optional lift assist wheels are installed.

    0-25 psi case drain port on tractor
    

    for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter)

    Remote relief pressure should be
    

    2700 psi w/16 gpm flow rate at couplers

    12 Volt electrical system -
    

    10 amp minimum.

    7 pin connector socket
    

    Three point quick hitch required for lift assist.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
• 1240 Pivot Transport [ Versions ]
  • - Hydraulic Hitch - 20 in. - 24 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Hydraulic Hitch - 30 15 in. - 12 23 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Hydraulic Hitch - 30 15 in. - 16 31 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Hydraulic Hitch - 30 in. - 12 Rows

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Hydraulic Hitch - 30 in. - 16 Rows

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Manual Hitch - 20 in. - 24 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Manual Hitch - 30 15 in. - 12 23 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Manual Hitch - 30 15 in. - 16 31 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Manual Hitch - 30 in. - 12 Rows

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
  • - Manual Hitch - 30 in. - 16 Rows

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 40 bu. each Nurse distribution to each row

    SEED HOPPERS:
    

    One 1.9 bushel hopper per row Capacities as follows: For 12 R machines - 22.8 bu. total For 16 R machines - 30.4 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Universal Display or AFS Universal Display Plus, please order an AFS Pro 600.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulically driven seed drive with variable rate 4 section control

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 16.5L x 16.1 14PR tires Two 15 in. w/7.60 x 15 6PR tires (on wing frames)

    9.5L x 15 tires are available as
    

    an option

    FRAME:
    

    8 x 8 in. (20.3 x 20.3 cm) main frame Trussed 7 x 7 in. (18 x 18 cm) main toolbar. Two double acting hydraulic cylinders with integral counterbalance valves and cylinder stops. One double acting hydraulic cylinder for frame fold. Frame locks provided. Toolbar wing cylinders provide float +11, -11 degrees.

    MARKERS:
    

    Optional low profile, triple flat hydraulic folding, controlled by automatic alternating electric control. 16 in. notched disk blade, shear bolt protection, adjustable disk angle.

    HITCH:
    

    Heavy-duty screw type jack. 7,000 lb. (3175 kg) capacity Tongue type hitch with hole for up to 2.0 in. (50 mm) diameter pin

    HYDRAULIC COUPLERS:
    

    Direct hydraulic drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for left vaccum fan and variable seed drives Two standard ISO male couplers for bulk fill fan Two standard ISO male couplers for lift and fold One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    CONVERSIONS FROM BEANS TO CORN:
    

    Soybean row units equipped with lock-up, meter vaccum shutoff and seed distribution plug.

    HYDRAULIC COUPLERS: (continued)
    

    Optional PTO drive system Two standard ISO male couplers for right vaccum fan and variable seed drive Two standard ISO male couplers for lift fold and fold One 3/8 in. ISO coupler for front fan case drain

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 10 ft. 0 in. (3.1 m) Transport width with markers 12 ft. 7 in. (3.8 m) without gran chem 12 ft. 9 in. (3.9 m) with gran chem Transport length 47 ft. (14.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Highway transport chain and attaching hardware 30,000 lb. (13608 kg) capacity Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Pivot Transport Planters come fully assembled and tested from the factory except gran chem. Factory Supplied Accessories ordered with planter will not be assembled.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with at case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Optional 36 GPM PTO
    

    Drive System (See Pump Information below): Bulk Fill: 1 remote (1 for lift/fold and markers). Relief pressure of 2700 PSI minimum w/13 gpm flow at couplers.

    Required for Direct Drive Hydraulic
    

    System: 4 remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drive motors, 1 for the front vaccum fan and two seed drive motors and liquid fertilizer - if equipped, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/51-58 gpm flow at couplers

    Required for Optional 22 GPM PTO
    

    Drive System: 3 Remotes (1 for lift/fold and markers, 1 for rear vaccum fan and two seed drives and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/34-39 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    16/31 - 23 amps Direct Drive;
    

    33 amps minimum with optional PTO Pump Drive System

    0-25 PSI drain port on tractor for fan
    

    motor. Case drains (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection, 3/8 in. supplied with planter) This is required for direct and optional PTO drive hydraulic systems

    Planter Electrical Requirements:
    

    24R20 - 23 amps Direct Drive; 33 amps minimum with optional PTO Pump Drive System

    16 R - 30 in. - 16 amps Direct Drive;
    

    26 amps with optional PTO Pump Drive System

    12 volt electrical system
    

    7 pin connector socket

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)
    

    Tractor drawbar hammerstrap

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractors for road transport of planter.

    For all pivot transport planter versions
    

    used with a Magnum, the heavy-duty drawbar option is required. Please order attachment number 719663016 from the Magnum price list.

    Tractor drawbar vertical load
    

    requirements - 7125 lbs. (3232 kg)

    For 7100, 7200 and 8900 Series
    

    Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from Parts Division.

    The tractor drawbar assist package
    

    (419613A) can be ordered from the Factory Supplied Accessories section of the planter price list, or upgrade to a heavy-duty drawbar by ordering p/n 87427768 from the Parts Division.

    Electronic service tools required
    

    for dealer service

    Requirements for Operation: (continued)
    

    For 7100, 7200 and 8900 Series Magnums and non-Case IH Row Crop Tractors order attachment number 419613A, tractor drawbar assist.

    Electronic service tools required for
    

    dealer service

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK)
• 1250 Front Fold Trailing [ Versions ]
  • - 2 Point Hitch - 12 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row 45.6 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR:
    

    Monitor has the following features from the cab with the Early Riser IV: Population, monitoring vs. target, high and low population alarms, population filter (update rate) adjustment, two hopper monitors, alarm cancel feature, speed area distance mode, seed count mode, optional feature/setup locks with password, backlight dimming for full sunlight/nighttime use, adjustable high volume, internal audible alarm, Metric/English units.

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Pro 600, please order an AFS Pro 600.

    Monitor 16 rows with the Early Riser IV
    

    and optional bulk fill fan rpm input. User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    Monitor 12 rows with the Early
    

    Riser IV, plus one vacuum input and/or optional bulk fill fan rpm input User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    Tongue: 8 x 16 in. (20.3 x 40.6 cm) main frame with a 6 x 14 in. (15 x 35 cm) inner telescoping tube. Fold: Two double acting hydraulic cylinders to fold each wing together while the inner telescoping tubes move in and out with draft tube assistance. Toolbar: Three section flex frame with wing flex of 21° both upward and downward.

    DRIVE:
    

    Two mechanical transmissions (136 speed combinations) with tire contact drives. Half width disconnect via electric clutch.

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 11 x 22.5 - 12PR truck tires Four 10 x 15 - 8PR tires (on wing frames) 11-22.5 12PR truck tires are available on wing frames as high flotation tire option

    MARKERS:
    

    Optional three section hydraulic folding marker. 16 in. smooth disk blade, tension bolt protection, adjustable disk angle.

    HITCH:
    

    2-point hitch with variable position hitch stand

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for left vacuum fan and seed drive Two standard ISO male couplers for right vacuum fan and seed drive Two standard ISO male couplers for lift and fold marker One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 3 in. (3.4 m) Transport width with markers 11 ft. 11 in. (3.6 m) with standard tire package 12 ft. 3 in. (3.7 m) with high flotation tire package Transport length (from center of 2-point pin) 43 ft. 6 in. (13.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory. Factory Supplied Accessories ordered with planter will not be assembled. Row unit press wheels must be installed at the dealership (4 center rows only).

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Requirements for Operation: (continued)
    

    Tractor Requirements: SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Direct Drive System:
    

    On-Row: 2 remotes (1 for lift/fold and markers, 1 for the vacuum fan and two seed drive motors. Relief pressure of 2700 PSI minimum with 27-30 gpm flow at couplers

    Required for Direct Drive Hydraulic
    

    system: On-Row: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers. Bulk fill: 4 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/49-58 gpm flow at couplers.

    Required for Optional 22 gpm PTO
    

    Drive System: On-row: 2 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side). Relief pressure of 2700 PSI minimum w/ 29-32 gpm flow at couplers. Bulk Fill: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers.

    NOTE: Bulk Fill can be selected to
    

    be shut off during planter lift. Flows at couplers 29-32 gpm. Requirements for Operation: (continued) Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    Note: Bulk Fill can be shut off
    

    through the AFS PRO 600 display during planter lift, thus reducing flows to 17 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    0-25 psi case drain port on tractor for
    

    fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    A third oil cooler is required on the
    

    tractor for MX Magnum tractors, when the direct drive hydraulic bulk fill option is ordered on the planter.

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin connector socket AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    If the PTO pump option is selected,
    

    the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter and 3 point hitch is also required.

    Tractor vertical load requirements:
    

    13,800 lbs. with 2-point hitch

    7 pin connector socket
    

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Electronic service tools required for
    

    dealer service.EX WORKS: Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted

    Electronic service tools required
    

    for dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted
  • - 2 Point Hitch - 16 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row 45.6 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR:
    

    Monitor has the following features from the cab with the Early Riser IV: Population, monitoring vs. target, high and low population alarms, population filter (update rate) adjustment, two hopper monitors, alarm cancel feature, speed area distance mode, seed count mode, optional feature/setup locks with password, backlight dimming for full sunlight/nighttime use, adjustable high volume, internal audible alarm, Metric/English units.

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Pro 600, please order an AFS Pro 600.

    Monitor 16 rows with the Early Riser IV
    

    and optional bulk fill fan rpm input. User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    Monitor 12 rows with the Early
    

    Riser IV, plus one vacuum input and/or optional bulk fill fan rpm input User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    Tongue: 8 x 16 in. (20.3 x 40.6 cm) main frame with a 6 x 14 in. (15 x 35 cm) inner telescoping tube. Fold: Two double acting hydraulic cylinders to fold each wing together while the inner telescoping tubes move in and out with draft tube assistance. Toolbar: Three section flex frame with wing flex of 21° both upward and downward.

    DRIVE:
    

    Two mechanical transmissions (136 speed combinations) with tire contact drives. Half width disconnect via electric clutch.

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 11 x 22.5 - 12PR truck tires Four 10 x 15 - 8PR tires (on wing frames) 11-22.5 12PR truck tires are available on wing frames as high flotation tire option

    MARKERS:
    

    Optional three section hydraulic folding marker. 16 in. smooth disk blade, tension bolt protection, adjustable disk angle.

    HITCH:
    

    2-point hitch with variable position hitch stand

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for left vacuum fan and seed drive Two standard ISO male couplers for right vacuum fan and seed drive Two standard ISO male couplers for lift and fold marker One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 3 in. (3.4 m) Transport width with markers 11 ft. 11 in. (3.6 m) with standard tire package 12 ft. 3 in. (3.7 m) with high flotation tire package Transport length (from center of 2-point pin) 43 ft. 6 in. (13.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory. Factory Supplied Accessories ordered with planter will not be assembled. Row unit press wheels must be installed at the dealership (4 center rows only).

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Requirements for Operation: (continued)
    

    Tractor Requirements: SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Direct Drive System:
    

    On-Row: 2 remotes (1 for lift/fold and markers, 1 for the vacuum fan and two seed drive motors. Relief pressure of 2700 PSI minimum with 27-30 gpm flow at couplers

    Required for Direct Drive Hydraulic
    

    system: On-Row: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers. Bulk fill: 4 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/49-58 gpm flow at couplers.

    Required for Optional 22 gpm PTO
    

    Drive System: On-row: 2 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side). Relief pressure of 2700 PSI minimum w/ 29-32 gpm flow at couplers. Bulk Fill: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers.

    NOTE: Bulk Fill can be selected to
    

    be shut off during planter lift. Flows at couplers 29-32 gpm. Requirements for Operation: (continued) Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    Note: Bulk Fill can be shut off
    

    through the AFS PRO 600 display during planter lift, thus reducing flows to 17 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    0-25 psi case drain port on tractor for
    

    fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    A third oil cooler is required on the
    

    tractor for MX Magnum tractors, when the direct drive hydraulic bulk fill option is ordered on the planter.

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin connector socket AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    If the PTO pump option is selected,
    

    the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter and 3 point hitch is also required.

    Tractor vertical load requirements:
    

    13,800 lbs. with 2-point hitch

    7 pin connector socket
    

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Electronic service tools required for
    

    dealer service.EX WORKS: Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted

    Electronic service tools required
    

    for dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted
  • - 2 Point Hitch - 24 ROWS

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row 45.6 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR:
    

    Monitor has the following features from the cab with the Early Riser IV: Population, monitoring vs. target, high and low population alarms, population filter (update rate) adjustment, two hopper monitors, alarm cancel feature, speed area distance mode, seed count mode, optional feature/setup locks with password, backlight dimming for full sunlight/nighttime use, adjustable high volume, internal audible alarm, Metric/English units.

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Pro 600, please order an AFS Pro 600.

    Monitor 16 rows with the Early Riser IV
    

    and optional bulk fill fan rpm input. User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    Monitor 12 rows with the Early
    

    Riser IV, plus one vacuum input and/or optional bulk fill fan rpm input User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    Tongue: 8 x 16 in. (20.3 x 40.6 cm) main frame with a 6 x 14 in. (15 x 35 cm) inner telescoping tube. Fold: Two double acting hydraulic cylinders to fold each wing together while the inner telescoping tubes move in and out with draft tube assistance. Toolbar: Three section flex frame with wing flex of 21° both upward and downward.

    DRIVE:
    

    Two mechanical transmissions (136 speed combinations) with tire contact drives. Half width disconnect via electric clutch.

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 11 x 22.5 - 12PR truck tires Four 10 x 15 - 8PR tires (on wing frames) 11-22.5 12PR truck tires are available on wing frames as high flotation tire option

    MARKERS:
    

    Optional three section hydraulic folding marker. 16 in. smooth disk blade, tension bolt protection, adjustable disk angle.

    HITCH:
    

    2-point hitch with variable position hitch stand

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for left vacuum fan and seed drive Two standard ISO male couplers for right vacuum fan and seed drive Two standard ISO male couplers for lift and fold marker One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 3 in. (3.4 m) Transport width with markers 11 ft. 11 in. (3.6 m) with standard tire package 12 ft. 3 in. (3.7 m) with high flotation tire package Transport length (from center of 2-point pin) 43 ft. 6 in. (13.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory. Factory Supplied Accessories ordered with planter will not be assembled. Row unit press wheels must be installed at the dealership (4 center rows only).

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Requirements for Operation: (continued)
    

    Tractor Requirements: SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Direct Drive System:
    

    On-Row: 2 remotes (1 for lift/fold and markers, 1 for the vacuum fan and two seed drive motors. Relief pressure of 2700 PSI minimum with 27-30 gpm flow at couplers

    Required for Direct Drive Hydraulic
    

    system: On-Row: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers. Bulk fill: 4 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/49-58 gpm flow at couplers.

    Required for Optional 22 gpm PTO
    

    Drive System: On-row: 2 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side). Relief pressure of 2700 PSI minimum w/ 29-32 gpm flow at couplers. Bulk Fill: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers.

    NOTE: Bulk Fill can be selected to
    

    be shut off during planter lift. Flows at couplers 29-32 gpm. Requirements for Operation: (continued) Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    Note: Bulk Fill can be shut off
    

    through the AFS PRO 600 display during planter lift, thus reducing flows to 17 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    0-25 psi case drain port on tractor for
    

    fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    A third oil cooler is required on the
    

    tractor for MX Magnum tractors, when the direct drive hydraulic bulk fill option is ordered on the planter.

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin connector socket AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    If the PTO pump option is selected,
    

    the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter and 3 point hitch is also required.

    Tractor vertical load requirements:
    

    13,800 lbs. with 2-point hitch

    7 pin connector socket
    

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Electronic service tools required for
    

    dealer service.EX WORKS: Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted

    Electronic service tools required
    

    for dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted
  • - Drawbar Hitch - 16 Rows

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row 45.6 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR:
    

    Monitor has the following features from the cab with the Early Riser IV: Population, monitoring vs. target, high and low population alarms, population filter (update rate) adjustment, two hopper monitors, alarm cancel feature, speed area distance mode, seed count mode, optional feature/setup locks with password, backlight dimming for full sunlight/nighttime use, adjustable high volume, internal audible alarm, Metric/English units.

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Pro 600, please order an AFS Pro 600.

    Monitor 16 rows with the Early Riser IV
    

    and optional bulk fill fan rpm input. User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    Monitor 12 rows with the Early
    

    Riser IV, plus one vacuum input and/or optional bulk fill fan rpm input User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    Tongue: 8 x 16 in. (20.3 x 40.6 cm) main frame with a 6 x 14 in. (15 x 35 cm) inner telescoping tube. Fold: Two double acting hydraulic cylinders to fold each wing together while the inner telescoping tubes move in and out with draft tube assistance. Toolbar: Three section flex frame with wing flex of 21° both upward and downward.

    DRIVE:
    

    Two mechanical transmissions (136 speed combinations) with tire contact drives. Half width disconnect via electric clutch.

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 11 x 22.5 - 12PR truck tires Four 10 x 15 - 8PR tires (on wing frames) 11-22.5 12PR truck tires are available on wing frames as high flotation tire option

    MARKERS:
    

    Optional three section hydraulic folding marker. 16 in. smooth disk blade, tension bolt protection, adjustable disk angle.

    HITCH:
    

    2-point hitch with variable position hitch stand

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for left vacuum fan and seed drive Two standard ISO male couplers for right vacuum fan and seed drive Two standard ISO male couplers for lift and fold marker One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 3 in. (3.4 m) Transport width with markers 11 ft. 11 in. (3.6 m) with standard tire package 12 ft. 3 in. (3.7 m) with high flotation tire package Transport length (from center of 2-point pin) 43 ft. 6 in. (13.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory. Factory Supplied Accessories ordered with planter will not be assembled. Row unit press wheels must be installed at the dealership (4 center rows only).

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Requirements for Operation: (continued)
    

    Tractor Requirements: SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Direct Drive System:
    

    On-Row: 2 remotes (1 for lift/fold and markers, 1 for the vacuum fan and two seed drive motors. Relief pressure of 2700 PSI minimum with 27-30 gpm flow at couplers

    Required for Direct Drive Hydraulic
    

    system: On-Row: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers. Bulk fill: 4 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/49-58 gpm flow at couplers.

    Required for Optional 22 gpm PTO
    

    Drive System: On-row: 2 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side). Relief pressure of 2700 PSI minimum w/ 29-32 gpm flow at couplers. Bulk Fill: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers.

    NOTE: Bulk Fill can be selected to
    

    be shut off during planter lift. Flows at couplers 29-32 gpm. Requirements for Operation: (continued) Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    Note: Bulk Fill can be shut off
    

    through the AFS PRO 600 display during planter lift, thus reducing flows to 17 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    0-25 psi case drain port on tractor for
    

    fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    A third oil cooler is required on the
    

    tractor for MX Magnum tractors, when the direct drive hydraulic bulk fill option is ordered on the planter.

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin connector socket AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    If the PTO pump option is selected,
    

    the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter and 3 point hitch is also required.

    Tractor vertical load requirements:
    

    13,800 lbs. with 2-point hitch

    7 pin connector socket
    

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Electronic service tools required for
    

    dealer service.EX WORKS: Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted

    Electronic service tools required
    

    for dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted
  • - Drawbar Hitch - 24 ROWS

    STANDARD FEATURES
    SEED HOPPERS:
    

    One 1.9 bushel hopper per row 45.6 bu. total

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR:
    

    Monitor has the following features from the cab with the Early Riser IV: Population, monitoring vs. target, high and low population alarms, population filter (update rate) adjustment, two hopper monitors, alarm cancel feature, speed area distance mode, seed count mode, optional feature/setup locks with password, backlight dimming for full sunlight/nighttime use, adjustable high volume, internal audible alarm, Metric/English units.

    MONITOR/CONTROL SYSTEM:
    

    (continued) System must be used with an AFS Pro 600. The AFS Pro 600 and tractor installation kits are not standard equipment. See tractor installation kits in Field Installed Attachments for specific tractor application. If your customer does not already have an AFS Pro 600, please order an AFS Pro 600.

    Monitor 16 rows with the Early Riser IV
    

    and optional bulk fill fan rpm input. User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    Monitor 12 rows with the Early
    

    Riser IV, plus one vacuum input and/or optional bulk fill fan rpm input User-definable features include: Planter population, average population, row scan, min/max/average row, seed spacing, seeds per distance, speed monitoring, three area accumulators with individual resets, accessory monitoring with high and low alarms & area per hour, user-selectable size and row indicators, bar graph

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure spring, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY-DUTY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    FRAME:
    

    Tongue: 8 x 16 in. (20.3 x 40.6 cm) main frame with a 6 x 14 in. (15 x 35 cm) inner telescoping tube. Fold: Two double acting hydraulic cylinders to fold each wing together while the inner telescoping tubes move in and out with draft tube assistance. Toolbar: Three section flex frame with wing flex of 21° both upward and downward.

    DRIVE:
    

    Two mechanical transmissions (136 speed combinations) with tire contact drives. Half width disconnect via electric clutch.

    CARRYING WHEELS:
    

    Tubeless with sealed precision bearings Four 11 x 22.5 - 12PR truck tires Four 10 x 15 - 8PR tires (on wing frames) 11-22.5 12PR truck tires are available on wing frames as high flotation tire option

    MARKERS:
    

    Optional three section hydraulic folding marker. 16 in. smooth disk blade, tension bolt protection, adjustable disk angle.

    HITCH:
    

    2-point hitch with variable position hitch stand

    HYDRAULIC COUPLERS:
    

    Two standard ISO male couplers for left vacuum fan and seed drive Two standard ISO male couplers for right vacuum fan and seed drive Two standard ISO male couplers for lift and fold marker One 3/8 in. ISO coupler for fan motor case drain (See Requirements for Operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 3 in. (3.4 m) Transport width with markers 11 ft. 11 in. (3.6 m) with standard tire package 12 ft. 3 in. (3.7 m) with high flotation tire package Transport length (from center of 2-point pin) 43 ft. 6 in. (13.3 m)

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory. Factory Supplied Accessories ordered with planter will not be assembled. Row unit press wheels must be installed at the dealership (4 center rows only).

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL.

    SEED DISCS. See Factory Supplied
    

    Accessories.

    TRACTOR INSTALLATION KIT AND
    

    CASE DRAIN. A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractors is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Requirements for Operation: (continued)
    

    Tractor Requirements: SEE TRACTOR/PLANTER COMPATIBILITY MATRIX.

    Required for Direct Drive System:
    

    On-Row: 2 remotes (1 for lift/fold and markers, 1 for the vacuum fan and two seed drive motors. Relief pressure of 2700 PSI minimum with 27-30 gpm flow at couplers

    Required for Direct Drive Hydraulic
    

    system: On-Row: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers. Bulk fill: 4 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, 1 for one vacuum fan and one seed drive left side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/49-58 gpm flow at couplers.

    Required for Optional 22 gpm PTO
    

    Drive System: On-row: 2 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side). Relief pressure of 2700 PSI minimum w/ 29-32 gpm flow at couplers. Bulk Fill: 3 remotes (1 for lift/fold and markers, 1 for one vacuum fan and one seed drive right side, and 1 for bulk fill fan). Relief pressure of 2700 PSI minimum w/39-45 gpm flow at couplers.

    NOTE: Bulk Fill can be selected to
    

    be shut off during planter lift. Flows at couplers 29-32 gpm. Requirements for Operation: (continued) Tractor Requirements: 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    Note: Bulk Fill can be shut off
    

    through the AFS PRO 600 display during planter lift, thus reducing flows to 17 gpm flow at couplers.

    Relief pressure valve of 2700 psi
    

    minimum

    0-25 psi case drain port on tractor for
    

    fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the machine is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    A third oil cooler is required on the
    

    tractor for MX Magnum tractors, when the direct drive hydraulic bulk fill option is ordered on the planter.

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin connector socket AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    If the PTO pump option is selected,
    

    the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft. If the tractor is equipped with a 1-3/8 in. PTO shaft, then order a 1-3/8 in. coupler (1958267C1) from the Parts Division.

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter and 3 point hitch is also required.

    Tractor vertical load requirements:
    

    13,800 lbs. with 2-point hitch

    7 pin connector socket
    

    AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Electronic service tools required for
    

    dealer service.EX WORKS: Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted

    Electronic service tools required
    

    for dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, SK) unless otherwise noted
• 1260 32 and 36 R Front Fold Trailing [ Versions ]
  • - 20 in. - 36 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 60 bushel each (120 bu. Total) Nurse distribution to each row.

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    Monitor and control system has the following features from the cab with the AFS PRO 600; Automated vacuum control and monitoring allowing vacuum adjustments at the touch screen. Variable rate control and monitoring of seed and liquid fertilizer (if equipped). The planter is divided in four sections allowing the user to turn off any section of the machine for point row applications. Frame and marker control (if equipped) is included and automated to alternate markers. Pneumatic down pressure (if equipped) and AFS AccuRow control (if equipped) is also available through the display. Monitor also provides three separate area counters; field, season and lifetime. Information alarms warn the operator of low bin levels for seed, row blockage, low / high seed population. Seed population is shown on a bar graph for each row. Planter includes seed tubes and AFS Smart Seed sensors. System must be used with AFS PRO 600. The AFS PRO 600 and tractor installation kits are not standard equipment.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure springs, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulic seed drive with two section control: 32R30 = 8-8-8-8 rows 36R30 = 9-9-9-9 rows

    CARRYING WHEELS:
    

    Four tubeless 425/65R-22.5 - Load Range L Highway

    Wing Wheel Tires:
    

    Eight tubeless 12.5L -15FI- 8PR tires (on wing frames)

    FRAME:
    

    Hitch: 8 X 16 in (20.32 x 40.64 cm) main hitch frame with a 6 x 14 in. (15.24 x 35.56 cm) inner telescoping tube. 12 x 12 in. (30.48 x 30.48 cm) main toolbar frame.

    Fold: Four double acting hydraulic cylinders to fold wings and draft tubes together. Inner telescoping hitch moves in and out by the draft tubes.

    Toolbar:
    

    Five section flex frame with wing flex of 15° inner wing and 20° outer wing both upward and downward.

    MARKERS:
    

    Four section hydraulic folding marker. 16 in. smooth disk blade with depth band, outer section tension bolt breakaway protection, adjustable disk angle and castering gauge wheel.

    HITCH:
    

    Hydraulic parallel link drawbar hitch with variable position hitch point.

    HYDRAULIC COUPLERS:
    

    Two standard 3/4 in. ISO male couplers for Bulk Fill fan Four standard ISO male couplers for variable rate seed drives and vacuum fan. Two 3/4 in. and two 1/2 in. Two standard 1/2 in. ISO male couplers for lift and fold. Two standard 1/2 in. ISO male couplers for hydraulic hitch One 3/8 in. ISO coupler for fan motor case drain (See requirements for operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 11" (3.63 m) Transport width with markers 14 ft. 2 in. (4.3 m) Transport length 32R30 - 54 ft. 10 in. (16.7 m) 36R30 - 56 ft. 5 in. (17.2 m) MISCELLANEOUS EQUIPMENT: Enhanced lighting package SMV emblem

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory, except for row unit press wheels on wings and sub bar row unit extensions. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL. SEED DISCS. See Factory Supplied Accessories.

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories at the back of the Planter section).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX. 32 R: Tractor PTO Hp recommended 255 hp and greater. 36 R: Tractor PTO Hp recommended 275 hp and greater.

    Note: Bulk Fill can be shut off through
    

    the AFS PRO 600 display during planter lift, thus reducing hydraulic demand.

    Required for Optional 40 gpm PTO Drive
    

    System: 3 remotes (1 for lift/fold and markers, 1 for hydraulic hitch, and 1 for seed drive and vacuum fan). Relief pressure of 2700 PSI minimum. With 34 gpm flow at couplers. 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft.

    Requirements for Operation: (continued)
    

    Planter Electrical requirements: 12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter. Towing vehicle weight should be 1-1/2 times planter weight.

    Tractor vertical load requirements:
    

    32R 2,240 lbs. on drawbar (empty) 36R 2,360 lbs. on drawbar (empty)

    Electronic service tools required
    

    for dealer service.

    Electronic service tools required for
    

    dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, Sk) unless otherwise noted
  • - 22 in. - 36 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 60 bushel each (120 bu. Total) Nurse distribution to each row.

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    Monitor and control system has the following features from the cab with the AFS PRO 600; Automated vacuum control and monitoring allowing vacuum adjustments at the touch screen. Variable rate control and monitoring of seed and liquid fertilizer (if equipped). The planter is divided in four sections allowing the user to turn off any section of the machine for point row applications. Frame and marker control (if equipped) is included and automated to alternate markers. Pneumatic down pressure (if equipped) and AFS AccuRow control (if equipped) is also available through the display. Monitor also provides three separate area counters; field, season and lifetime. Information alarms warn the operator of low bin levels for seed, row blockage, low / high seed population. Seed population is shown on a bar graph for each row. Planter includes seed tubes and AFS Smart Seed sensors. System must be used with AFS PRO 600. The AFS PRO 600 and tractor installation kits are not standard equipment.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure springs, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulic seed drive with two section control: 32R30 = 8-8-8-8 rows 36R30 = 9-9-9-9 rows

    CARRYING WHEELS:
    

    Four tubeless 425/65R-22.5 - Load Range L Highway

    Wing Wheel Tires:
    

    Eight tubeless 12.5L -15FI- 8PR tires (on wing frames)

    FRAME:
    

    Hitch: 8 X 16 in (20.32 x 40.64 cm) main hitch frame with a 6 x 14 in. (15.24 x 35.56 cm) inner telescoping tube. 12 x 12 in. (30.48 x 30.48 cm) main toolbar frame.

    Fold: Four double acting hydraulic cylinders to fold wings and draft tubes together. Inner telescoping hitch moves in and out by the draft tubes.

    Toolbar:
    

    Five section flex frame with wing flex of 15° inner wing and 20° outer wing both upward and downward.

    MARKERS:
    

    Four section hydraulic folding marker. 16 in. smooth disk blade with depth band, outer section tension bolt breakaway protection, adjustable disk angle and castering gauge wheel.

    HITCH:
    

    Hydraulic parallel link drawbar hitch with variable position hitch point.

    HYDRAULIC COUPLERS:
    

    Two standard 3/4 in. ISO male couplers for Bulk Fill fan Four standard ISO male couplers for variable rate seed drives and vacuum fan. Two 3/4 in. and two 1/2 in. Two standard 1/2 in. ISO male couplers for lift and fold. Two standard 1/2 in. ISO male couplers for hydraulic hitch One 3/8 in. ISO coupler for fan motor case drain (See requirements for operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 11" (3.63 m) Transport width with markers 14 ft. 2 in. (4.3 m) Transport length 32R30 - 54 ft. 10 in. (16.7 m) 36R30 - 56 ft. 5 in. (17.2 m) MISCELLANEOUS EQUIPMENT: Enhanced lighting package SMV emblem

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory, except for row unit press wheels on wings and sub bar row unit extensions. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL. SEED DISCS. See Factory Supplied Accessories.

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories at the back of the Planter section).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX. 32 R: Tractor PTO Hp recommended 255 hp and greater. 36 R: Tractor PTO Hp recommended 275 hp and greater.

    Note: Bulk Fill can be shut off through
    

    the AFS PRO 600 display during planter lift, thus reducing hydraulic demand.

    Required for Optional 40 gpm PTO Drive
    

    System: 3 remotes (1 for lift/fold and markers, 1 for hydraulic hitch, and 1 for seed drive and vacuum fan). Relief pressure of 2700 PSI minimum. With 34 gpm flow at couplers. 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft.

    Requirements for Operation: (continued)
    

    Planter Electrical requirements: 12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter. Towing vehicle weight should be 1-1/2 times planter weight.

    Tractor vertical load requirements:
    

    32R 2,240 lbs. on drawbar (empty) 36R 2,360 lbs. on drawbar (empty)

    Electronic service tools required
    

    for dealer service.

    Electronic service tools required for
    

    dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, Sk) unless otherwise noted
  • - 30 in. - 32 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 60 bushel each (120 bu. Total) Nurse distribution to each row.

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    Monitor and control system has the following features from the cab with the AFS PRO 600; Automated vacuum control and monitoring allowing vacuum adjustments at the touch screen. Variable rate control and monitoring of seed and liquid fertilizer (if equipped). The planter is divided in four sections allowing the user to turn off any section of the machine for point row applications. Frame and marker control (if equipped) is included and automated to alternate markers. Pneumatic down pressure (if equipped) and AFS AccuRow control (if equipped) is also available through the display. Monitor also provides three separate area counters; field, season and lifetime. Information alarms warn the operator of low bin levels for seed, row blockage, low / high seed population. Seed population is shown on a bar graph for each row. Planter includes seed tubes and AFS Smart Seed sensors. System must be used with AFS PRO 600. The AFS PRO 600 and tractor installation kits are not standard equipment.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure springs, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulic seed drive with two section control: 32R30 = 8-8-8-8 rows 36R30 = 9-9-9-9 rows

    CARRYING WHEELS:
    

    Four tubeless 425/65R-22.5 - Load Range L Highway

    Wing Wheel Tires:
    

    Eight tubeless 12.5L -15FI- 8PR tires (on wing frames)

    FRAME:
    

    Hitch: 8 X 16 in (20.32 x 40.64 cm) main hitch frame with a 6 x 14 in. (15.24 x 35.56 cm) inner telescoping tube. 12 x 12 in. (30.48 x 30.48 cm) main toolbar frame.

    Fold: Four double acting hydraulic cylinders to fold wings and draft tubes together. Inner telescoping hitch moves in and out by the draft tubes.

    Toolbar:
    

    Five section flex frame with wing flex of 15° inner wing and 20° outer wing both upward and downward.

    MARKERS:
    

    Four section hydraulic folding marker. 16 in. smooth disk blade with depth band, outer section tension bolt breakaway protection, adjustable disk angle and castering gauge wheel.

    HITCH:
    

    Hydraulic parallel link drawbar hitch with variable position hitch point.

    HYDRAULIC COUPLERS:
    

    Two standard 3/4 in. ISO male couplers for Bulk Fill fan Four standard ISO male couplers for variable rate seed drives and vacuum fan. Two 3/4 in. and two 1/2 in. Two standard 1/2 in. ISO male couplers for lift and fold. Two standard 1/2 in. ISO male couplers for hydraulic hitch One 3/8 in. ISO coupler for fan motor case drain (See requirements for operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 11" (3.63 m) Transport width with markers 14 ft. 2 in. (4.3 m) Transport length 32R30 - 54 ft. 10 in. (16.7 m) 36R30 - 56 ft. 5 in. (17.2 m) MISCELLANEOUS EQUIPMENT: Enhanced lighting package SMV emblem

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory, except for row unit press wheels on wings and sub bar row unit extensions. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL. SEED DISCS. See Factory Supplied Accessories.

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories at the back of the Planter section).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX. 32 R: Tractor PTO Hp recommended 255 hp and greater. 36 R: Tractor PTO Hp recommended 275 hp and greater.

    Note: Bulk Fill can be shut off through
    

    the AFS PRO 600 display during planter lift, thus reducing hydraulic demand.

    Required for Optional 40 gpm PTO Drive
    

    System: 3 remotes (1 for lift/fold and markers, 1 for hydraulic hitch, and 1 for seed drive and vacuum fan). Relief pressure of 2700 PSI minimum. With 34 gpm flow at couplers. 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft.

    Requirements for Operation: (continued)
    

    Planter Electrical requirements: 12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter. Towing vehicle weight should be 1-1/2 times planter weight.

    Tractor vertical load requirements:
    

    32R 2,240 lbs. on drawbar (empty) 36R 2,360 lbs. on drawbar (empty)

    Electronic service tools required
    

    for dealer service.

    Electronic service tools required for
    

    dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, Sk) unless otherwise noted
  • - 30 in. - 36 ROWS

    STANDARD FEATURES
    BULK SEED HOPPERS:
    

    Two seed tanks, 60 bushel each (120 bu. Total) Nurse distribution to each row.

    SEED METERING/DELIVERY:
    

    Advanced Seed Meter located on each row to meter seed from hoppers to openers. Planter mounted, hydraulically driven fan pulls seed to holes in seed disc. SEED DISCS REQUIRED FOR OPERATION

    MONITOR/CONTROL SYSTEM:
    

    Monitor and control system has the following features from the cab with the AFS PRO 600; Automated vacuum control and monitoring allowing vacuum adjustments at the touch screen. Variable rate control and monitoring of seed and liquid fertilizer (if equipped). The planter is divided in four sections allowing the user to turn off any section of the machine for point row applications. Frame and marker control (if equipped) is included and automated to alternate markers. Pneumatic down pressure (if equipped) and AFS AccuRow control (if equipped) is also available through the display. Monitor also provides three separate area counters; field, season and lifetime. Information alarms warn the operator of low bin levels for seed, row blockage, low / high seed population. Seed population is shown on a bar graph for each row. Planter includes seed tubes and AFS Smart Seed sensors. System must be used with AFS PRO 600. The AFS PRO 600 and tractor installation kits are not standard equipment.

    ROW UNITS (BOLT-ON):
    

    Single pin quick adjust down pressure springs, 14 in. (35 cm) staggered left and right hand double disk openers with NEW HEAVY DOUBLE ROW TRIPLE LIP BEARINGS and flat scrapers (rotary scraper available through Parts Division), quick adjustable staggered covering disks, 6.5 x 12 in. press wheel and 2 quick adjustable 4 x 16 in. depth equalizing gauge wheels per row with special profile tires.

    DEPTH CONTROL:
    

    Single handle, infinite settings 0-3.5 in., zero indexed.

    DRIVE:
    

    Hydraulic seed drive with two section control: 32R30 = 8-8-8-8 rows 36R30 = 9-9-9-9 rows

    CARRYING WHEELS:
    

    Four tubeless 425/65R-22.5 - Load Range L Highway

    Wing Wheel Tires:
    

    Eight tubeless 12.5L -15FI- 8PR tires (on wing frames)

    FRAME:
    

    Hitch: 8 X 16 in (20.32 x 40.64 cm) main hitch frame with a 6 x 14 in. (15.24 x 35.56 cm) inner telescoping tube. 12 x 12 in. (30.48 x 30.48 cm) main toolbar frame.

    Fold: Four double acting hydraulic cylinders to fold wings and draft tubes together. Inner telescoping hitch moves in and out by the draft tubes.

    Toolbar:
    

    Five section flex frame with wing flex of 15° inner wing and 20° outer wing both upward and downward.

    MARKERS:
    

    Four section hydraulic folding marker. 16 in. smooth disk blade with depth band, outer section tension bolt breakaway protection, adjustable disk angle and castering gauge wheel.

    HITCH:
    

    Hydraulic parallel link drawbar hitch with variable position hitch point.

    HYDRAULIC COUPLERS:
    

    Two standard 3/4 in. ISO male couplers for Bulk Fill fan Four standard ISO male couplers for variable rate seed drives and vacuum fan. Two 3/4 in. and two 1/2 in. Two standard 1/2 in. ISO male couplers for lift and fold. Two standard 1/2 in. ISO male couplers for hydraulic hitch One 3/8 in. ISO coupler for fan motor case drain (See requirements for operation)

    TRANSPORT DIMENSIONS:
    

    Transport height with markers 11 ft. 11" (3.63 m) Transport width with markers 14 ft. 2 in. (4.3 m) Transport length 32R30 - 54 ft. 10 in. (16.7 m) 36R30 - 56 ft. 5 in. (17.2 m) MISCELLANEOUS EQUIPMENT: Enhanced lighting package SMV emblem

    MISCELLANEOUS EQUIPMENT:
    

    Enhanced lighting package SMV emblem

    ASSEMBLY:
    

    Planters come fully assembled and tested from the factory, except for row unit press wheels on wings and sub bar row unit extensions. Factory Supplied Accessories ordered with planter will not be assembled.

    Requirements for Operation:
    

    REFER TO SEED METER CHART FOR APPROVED SEED WITH BULK FILL. SEED DISCS. See Factory Supplied Accessories.

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories).

    TRACTOR INSTALLATION KIT AND CASE DRAIN:
    

    A hydraulic case drain port is required for all 1200 planters. A tractor remote or standard motor return cannot be used for this purpose. If tractor is not equipped with a case drain port, consult the Tractor Price List or Parts Book to obtain the necessary case drain kit. If the tractor is equipped with a case drain port and it does not accept the 3/8 in. flush face male coupler supplied with the planter, order appropriate conversion parts from Parts Division (See Parts Division Supplied Accessories at the back of the Planter section).

    Tractor Requirements:
    

    SEE TRACTOR/PLANTER COMPATIBILITY MATRIX. 32 R: Tractor PTO Hp recommended 255 hp and greater. 36 R: Tractor PTO Hp recommended 275 hp and greater.

    Note: Bulk Fill can be shut off through
    

    the AFS PRO 600 display during planter lift, thus reducing hydraulic demand.

    Required for Optional 40 gpm PTO Drive
    

    System: 3 remotes (1 for lift/fold and markers, 1 for hydraulic hitch, and 1 for seed drive and vacuum fan). Relief pressure of 2700 PSI minimum. With 34 gpm flow at couplers. 0-25 psi case drain port on tractor for fan motor case drain (1/4 in. or 3/8 in. case drain coupler required depending on tractor case drain connection - 3/8 in. is supplied with planter).

    PTO pump is available as an option.
    

    If the PTO pump option is selected, the tractor must have a 1,000 RPM PTO. The PTO coupler supplied with the planter is for a 1-3/4 in. PTO shaft.

    Requirements for Operation: (continued)
    

    Planter Electrical requirements: 12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Planter Electrical requirements:
    

    12 Volt electrical system 7 pin lighting connector socket. AFS 9 Pin Connection (TRACTOR INSTALLATION KIT)

    Tractor front end weights or wheel
    

    weights or liquid ballast may be required on some tractor models for road transport of planter. Towing vehicle weight should be 1-1/2 times planter weight.

    Tractor vertical load requirements:
    

    32R 2,240 lbs. on drawbar (empty) 36R 2,360 lbs. on drawbar (empty)

    Electronic service tools required
    

    for dealer service.

    Electronic service tools required for
    

    dealer service.

    EX WORKS:
    

    Wholegoods (Ex Works Saskatoon, SK) (Freight Equalized East Moline, IL) Factory Supplied Attachments (Ex Works Saskatoon, Sk) unless otherwise noted