Case IH Home
  • Summary

Your Summary

DRAPER HEADS
STATUS: NOT COMPLETE
CONFIGURED PRICE: $ NA USD
ACCESSORIES: $ NA USD
TOTAL: $ NA USD
† Taxes, freight, setup and delivery not included.
Standard Features Print Summary Save Configuration
Clear Options | Go To Accessories
You must login to manage your saved config group.
1. Select a product
2. Select a model
3. Options
4. Accessories
5. Summary
6. Request a quote
USD
All prices displayed are:  
Home > Harvesting > DRAPER HEADS

2. Select a model

  • 2142 Grain Draper Header [ Versions ]
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system Single point / single lever header hydraulic coupler Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 19 oz. rubber coated polyester with V-guide tracking Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Single Span PU reel, 5 Bat 31.5in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD ONLY) Knife - Coarse serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3 in.(76 mm) stroke, 1050 - 1300 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Quick detach round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178 mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2142 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system Single point / single lever header hydraulic coupler Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 19 oz. rubber coated polyester with V-guide tracking Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Single Span PU reel, 5 Bat 31.5in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD ONLY) Knife - Coarse serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3 in.(76 mm) stroke, 1050 - 1300 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Quick detach round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178 mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2142 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
  • 2152 Grain Draper Header [ Versions ]
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system for 88 and 20 Series Combines Single point / single lever header hydraulic coupler for 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual or single span PU reel, 5, 6, 9 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box (SKD and DKD) Knife - Coarse or Fine serrated bolt-on sections, and double heat-treated forged guards or case hardened stub guards with sheet metal top guard Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Mechanical top link to adjust header angle Poly cutterbar skid sections cover entire cutterbar length Standard - 25 ft., 30 ft., 35 ft. and 40 ft. (double knife) Optional - 40 (single knife) and 45 ft.
      Adjustable skid shoes with poly -Standard or Optional depending on configuration Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2152 RIGID DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
  • 2162 Grain Draper Header [ Versions ]
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system on 88 and 20 Series Combines Single point / single lever header hydraulic coupler on 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual span PU reel, 5 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box Knife - Coarse serrated bolt-on sections and double heat-treated forged guards Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Hydraulic center link - In-cab control to adjust header angle Auto header height control with visual float and angle indicators Poly cutterbar skid sections cover entire cutterbar length
      Adjustable inboard and outboard skid shoes with poly Flex-frame balanced header lateral flotation system Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2162 DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system on 88 and 20 Series Combines Single point / single lever header hydraulic coupler on 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual span PU reel, 5 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box Knife - Coarse serrated bolt-on sections and double heat-treated forged guards Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Hydraulic center link - In-cab control to adjust header angle Auto header height control with visual float and angle indicators Poly cutterbar skid sections cover entire cutterbar length
      Adjustable inboard and outboard skid shoes with poly Flex-frame balanced header lateral flotation system Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2162 DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system on 88 and 20 Series Combines Single point / single lever header hydraulic coupler on 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual span PU reel, 5 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box Knife - Coarse serrated bolt-on sections and double heat-treated forged guards Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Hydraulic center link - In-cab control to adjust header angle Auto header height control with visual float and angle indicators Poly cutterbar skid sections cover entire cutterbar length
      Adjustable inboard and outboard skid shoes with poly Flex-frame balanced header lateral flotation system Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2162 DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
    • STANDARD FEATURES:
      Single Lever, quick attach header latching system on 88 and 20 Series Combines Single point / single lever header hydraulic coupler on 88 and 20 Series Combines Amber transport lights (2) with single point electrical connector Drapers - 41.6 in. (1057 mm) 24 oz. rubber skim coated polyester with V-guide tracking and integral seal on leading edge Hydraulic header draper drive adjustable speed: 0 - 464 ft./min (141 m/min.) Adjustable guard angle 2 - 7.4° Hydraulic reel drive adjustable from cab Heavy-duty dual span PU reel, 5 Bat 31.5 in. (800 mm) tine tip radius with cammed tine control. Plastic tines Hydraulic reel raise and fore / aft control Knife drive - heavy-duty hydraulic oil bath wobble box Knife - Coarse serrated bolt-on sections and double heat-treated forged guards Knife drive - "C" section belt to wobble box 3in. (76 mm) stroke, 1050 - 1400 strokes/min. Telescoping knife driveline w/ 60° free rotation coupler for easy hook-up Spare knife storage Hydraulic center link - In-cab control to adjust header angle Auto header height control with visual float and angle indicators Poly cutterbar skid sections cover entire cutterbar length
      Adjustable inboard and outboard skid shoes with poly Flex-frame balanced header lateral flotation system Quick Detach Round bar crop dividers
      MOUNTING ADAPTER:
      Low friction dual coil spring header flotation system Drive line from left side of feeder Feed conveyor - 78.7 in. (2000 mm) rubber coated polyester with V-guide tracking Maximum feed conveyor drive speed: 400 ft./min. (122 m/min.) Feeder conveyor and auger reverse with combine feeder reverser system Hydraulically driven feed conveyor Mechanically driven feed auger with slip clutch (floating) and retaining springs - 65.3 in. (1660 mm) wide - 22 in. (559 mm) outside diameter - Max speed 150 rpm Oil bath gearbox chaincase Header flotation - Up to 7 in. (178mm) vertical and 4.8° lateral flotation Hinged poly feed draper pan (trap door) Fully intregrated hydraulic and reservoir system to power the knife drive, feed draper and side draper hydraulic motors
      Requirements for Operation:
      THE MODEL 2162 DRAPER HEADER CAN ONLY BE ORDERED DURING THE FOLLOWING ORDER WRITING PERIOD:
      ORDERING PERIOD:
      JUNE - NOVEMBER 2009
IRONBuilder
** Prices quoted are U.S. Manufacturer Suggested Retail Prices and are not valid outside of the United States of America. Please see your local dealer for a competitive quote in your local currency. Configurations and pricing must be reviewed by a Case IH dealer for accuracy, and to account for any applicable finance programs, discounts, trade-in values or desired supplemental service and/or support offerings. PDI, freight, other charges, equipment setup not included. CNH America LLC reserves the right to revise the Manufacturer Suggested Retail Prices.
Change Region | Sitemap
Legal Notices | Terms & Conditions | Privacy Policy
©2010 CNH America LLC